1. Продукт закончилсяview
The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.
Содержимое упаковки
- 2 x Lepro 12V LED Strip Lights (32.8 ft each)
- Руководство пользователя
Note: A 12V power adapter is not included and must be purchased separately.
Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.
2. Правила техники безопасности
Перед установкой и использованием внимательно ознакомьтесь со всеми инструкциями по технике безопасности. Несоблюдение этих инструкций может привести к поражению электрическим током, возгоранию или другим опасным ситуациям.
- Источник питания: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattage of the LED strip lights does not exceed the maximum wattage of your power adapter.
- Только для использования в помещении: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
- Поверхность установки: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
- Резка: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
- Нагревать: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
- Дети: Рабочий томtage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.
3. Настройка и установка
3.1 Перед установкой
- Планируйте свою планировку: Determine the desired path for your LED strip. Measure the length required.
- Очистите поверхность: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
- Проверьте полоску: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.
3.2 Connecting the Strip Light
The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.
- Locate the DC input connector on the LED strip.
- Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
- Вставьте адаптер питания в стандартную стенную розетку.
Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.
3.3 Mounting the Strip Light
The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.
- Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
- Нанесите полоску: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
- Резка (при необходимости): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
- Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.
Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.
4. Инструкция по эксплуатации
Operating the Lepro 12V LED Strip Light is straightforward once installed:
- Включение/выключение питания: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
- Яркость: This specific model of LED strip light is не затемняемый. It operates at a fixed brightness when powered on.
5. Уход и обслуживание
Proper care ensures the longevity and performance of your LED strip lights:
- Уборка: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Хранилище: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
- Избегайте резких изгибов: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.
6. Поиск Неисправностей
If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Светодиодная лента не горит. |
|
|
| Part of the LED strip is not lighting up. |
|
|
| Клей не держится. |
|
|
7. Технические характеристики продукта
| Особенность | Спецификация |
|---|---|
| Бренд | Лепро |
| Номер модели | N4100057-WW-2 |
| Светлый цвет | Теплый белый |
| Цветовая температура | 3000 Кельвинов |
| Тип источника света | Светодиод (SMD 2835) |
| Количество светодиодов | 300 per 32.8 ft strip (600 total for 2-pack) |
| Длина | 32.8 ft (per strip) |
| Томtage | 12 Вольта постоянного тока |
| Ватtage | 18 watts (per strip) |
| Яркость | 92 lm/ft (1200 Lumens total per strip) |
| Специальная характеристика | Не регулируется яркость |
| Использование внутри и снаружи помещений | Только для использования в помещении |
| Материал | Медь, Пластик |
| Тип крепления | Самоклеящийся |
| Режущийся | Every 3 LEDs (approx. 2 inches) |
| Вес товара | 3.53 унции (100 граммов) |
8. Гарантия и поддержка клиентов
Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.
You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: Магазин Lepro Amazon.
