Xpelair Simply Silent DX100TS Timer Square Extractor Fan User Manual

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Xpelair Simply Silent DX100TS Timer Square extractor fan. This 100mm (4-inch) fan is designed for use in bathrooms, shower rooms, and ensuites, offering efficient ventilation with low noise levels. It features Ghost Air Movement Technology for quiet operation and includes a wall kit for through-the-wall installations.

2. Информация по технике безопасности

• Installation must be carried out by a qualified electrician in accordance with current wiring regulations.
• Перед установкой, обслуживанием или чисткой убедитесь, что электропитание отключено.
• Данное устройство не предназначено для использования лицами (включая детей) с ограниченными физическими, сенсорными или умственными способностями или с недостатком опыта и знаний, если они не находятся под присмотром или не получили инструкции по использованию устройства от лица, ответственного за их безопасность.
• Необходимо следить за детьми, чтобы они не играли с прибором.
• Не погружайте какие-либо части вентилятора в воду или другие жидкости.
• Ensure that the air intake and exhaust vents are not obstructed.

3. Содержимое упаковки

Перед началом установки убедитесь, что все компоненты присутствуют:

• Xpelair Simply Silent DX100TS Extractor Fan Unit
• 300mm Telescopic Wall Tube (two pieces)
• External Grille
• Крепежные элементы (винты, дюбели)
• Руководство по эксплуатации

Рисунок 3.1: All components included in the Xpelair Simply Silent DX100TS Timer Square Extractor Fan with Wall Kit. This image displays the main fan unit, the black external grille, the two-piece white telescopic duct, and a small bag of fixings.

4. Настройка и установка

The DX100TS is designed for through-the-wall installation. A 100mm diameter hole is required.

1. Подготовьте проем в стене: Create a 100mm diameter hole through the wall at the desired installation location. Ensure there is sufficient space for wiring and access.
2. Install the Telescopic Duct: The wall kit includes a 300mm length of round telescopic wall tube, supplied in two pieces. Slide these pieces into each other to adjust the length to match your wall thickness. Insert the assembled duct into the prepared wall opening.
3. Mount the External Grille: Secure the external grille to the exterior wall, ensuring it covers the outer end of the telescopic duct. Use the provided fixings.
4. Электрическое подключение: Connect the fan unit to the electrical supply. This model is a timer version, typically wired to a lighting circuit. Refer to the wiring diagram provided with the fan for correct connections. Ensure all connections are secure and insulated.
5. Установите вентиляторный блок: Secure the main fan unit to the interior wall, connecting it to the telescopic duct. The fan features a "twist and click" fascia for easy attachment and removal.

Рисунок 4.1: The Xpelair DX100TS fan unit connected to the telescopic wall duct, ready for installation into a wall opening. This illustrates how the fan integrates with the adjustable ducting system.

Рисунок 4.2: Сторона проfile of the Xpelair DX100TS fan unit, showing its depth and the diameter of the spigot. Dimensions are indicated as 98mm diameter for the spigot, 35.7mm for the fascia depth, and 86.5mm for the spigot length.

5. Инструкция по эксплуатации

The DX100TS Timer Square fan operates with two selectable speeds and an adjustable timer function.

• Выбор скорости: The fan offers two extraction speeds: 15 litres per second (54 m³/hr) or 21 litres per second (76 m³/hr). The desired speed setting is typically configured during installation.
• Функция таймера: This model includes an adjustable timer, which can be set from 30 seconds to 30 minutes. When connected to a remote switch (e.g., a lighting circuit), the fan will activate when the switch is turned on. After the switch is turned off, the fan will continue to run for the pre-set duration before switching off automatically.

Рисунок 5.1: Передний view of the Xpelair Simply Silent DX100TS extractor fan, showcasing its grille-style fascia and the Xpelair branding. This is the visible part of the fan when installed indoors.

6. Техническое обслуживание

Регулярная очистка обеспечивает оптимальную производительность и долговечность вашего вентилятора.

1. Отключить питание: Always ensure the power supply to the fan is switched off at the mains before performing any maintenance.
2. Удалить фасцию: The fan features a "So Simple Maintenance" twist and click fascia. Gently twist and pull the fascia to remove it from the main unit.
3. Чистые компоненты: Используйте мягкий, damp cloth to wipe down the fascia and the fan blades. Do not use abrasive cleaners or solvents. Ensure all parts are dry before reassembly.
4. Reattach Fascia: Align the fascia with the fan unit and push until it clicks securely into place.
5. Check External Grille: Periodically inspect the external grille for any blockages from debris or insects and clean as necessary.

7. Поиск Неисправностей

8. Технические характеристики

9. Гарантия и поддержка

For warranty information, technical support, or to purchase replacement parts, please contact Xpelair customer service. Details can typically be found on the Xpelair official webсайте или на упаковке продукта.

Always ensure that any repairs or electrical work are carried out by a qualified professional.