AMS F5962

Руководство пользователя радиоуправляемых настенных часов AMS F5962

Модель: F5962

1. Введение

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Продукт закончилсяview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Рисунок 1: Передняя часть view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Содержимое упаковки

Пожалуйста, проверьте содержимое посылки после распаковки. Убедитесь, что все предметы на месте и не повреждены.

4. Настройка

4.1 Установка аккумулятора

  1. Найдите батарейный отсек на задней стороне часов.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Плотно закройте крышку батарейного отсека.

Важный: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Начальная синхронизация времени

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Примечание: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Установка часов

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Инструкция по эксплуатации

Once set up, the AMS F5962 operates automatically.

6. Техническое обслуживание

6.1 Очистка

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2. Замена батареи

Если стрелки часов перестали двигаться или время стало показывать неточно, скорее всего, пришло время заменить батарейку.

  1. Извлеките старую батарею из отсека.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Экологическое примечание: Пожалуйста, утилизируйте использованные батарейки надлежащим образом в соответствии с местными правилами.

7. Поиск Неисправностей

ПроблемаВозможная причинаРешение
Clock hands do not move or stop.Разряжена батарея.Замените батарею на новую.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Помехи от другой электроники.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Убедитесь, что батарея новая.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Технические характеристики

БрендАМС
Номер моделиФ5962
Тип дисплеяАналоговый
Специальная характеристикаRadio-Controlled Time Synchronization
МатериалОкрашенный металл
ЦветBeige (dial), Brown (housing)
СтильАнтичный
Размеры продукта35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Вес товара1.22 кг
Источник питанияПитание от батареи
Использование внутри и снаружи помещенийВ помещении

9. Гарантия и поддержка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS webсайт для получения дальнейшей помощи.

Связанные документы - Ф5962

Предварительноview Руководство пользователя радиоуправляемых часов AMS 5898 / 5893
Подробные инструкции по настройке и эксплуатации радиоуправляемых часов AMS 5898 и AMS 5893, включая установку времени, функции будильника, отображение температуры и техническое обслуживание.
Предварительноview Инструкция по эксплуатации настенных часов AMS
Инструкция по эксплуатации настенных часов AMS, включающая установку, замену батареек и общие правила использования, представлена ​​на нескольких языках.
Предварительноview Руководство по эксплуатации оценочного комплекта адаптерной платы ams AS5600L
Данное руководство содержит исчерпывающую информацию о плате-адаптере ams AS5600L-WL_EK_AB, включая содержимое комплекта, описание платы, инструкции по монтажу, сведения о распиновке, работу в режиме I2C, принципиальную схему оборудования, разводку печатной платы и информацию для заказа.
Предварительноview Руководство пользователя 14-битного датчика положения вращения ams AS5048
Данное руководство пользователя содержит подробную информацию о 14-битном датчике положения поворота ams AS5048 с цифровым выходом угла и ШИМ. В нём описывается плата адаптера AS5048, монтаж, распиновка, варианты использования (SPI, Daisy Chain), кодирование прошивки.ampФайлы и схемы оборудования. Необходимы инженерам, интегрирующим этот датчик в свои системы.
Предварительноview Руководство по эксплуатации оценочного комплекта адаптерной платы ams AS5048
В данном руководстве подробно описана плата-адаптер ams AS5048 (AS5048-EK-AB), оценочный комплект для магнитного датчика положения AS5048. В нем рассматриваются аппаратная часть, режимы работы (SPI, I2C), программное обеспечение и многое другое.amples, and contact information for ams AG.
Предварительноview ams AS5048 Adapter Board Evaluation Kit Manual | AS5048-EK-AB
Explore the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. This manual provides essential details on features, SPI/I2C interfaces, hardware, and software examples for efficient engineering development.