Введение
Thank you for choosing the DS18 PRO-X6BM 6.5" Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker. Designed for high-quality audio reproduction, the PRO-X6BM delivers clear and powerful midrange sound for your car or truck stereo system.
Характеристики продукта
- Midrange Performance: Engineered to handle the crucial mid-range frequencies of the audible sound spectrum, providing excellent clarity for instrumentals and vocals.
- Работа с высокой мощностью: Delivers an impressive 500W Max Power and 250W RMS at 8 Ohms, suitable for a wide range of audio setups.
- Прочная звуковая катушка: Features a 1.5" high-temperature CCAW voice coil designed for extreme heat resistance and long-term structural integrity.
- Улучшенный звук: Upgrade your existing stereo system with a speaker that provides superior midrange detail compared to stock options.
- Integrated Bullet Dust Cover: Includes a specially designed bullet dust cover to protect the voice coil and optimize sound output.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Тип | Midrange Loudspeaker with Bullet |
| Размер | 6.5 дюймов |
| RMS мощность | 250 Вт |
| Максимальная мощность | 500 Вт |
| Частотная характеристика | 118-17КГц |
| Сопротивление | 8 Ом |
| Чувствительность | 90дБ |
| Размер звуковой катушки | 1.5 дюймов |
| Размер магнита | 30 унции |
| Глубина монтажа | 2.72 дюйма (69 мм) |
| Размер выреза | 5.7 дюйма (145 мм) |
| Материал (конус) | Непрессованный бумажный конус |
| Материал (рама) | Красная стальная корзина |
| Material (Surround) | Cloth Edge |
| Включенные компоненты | 1 х спикер |
Настройка и установка
Proper installation is crucial for optimal performance and longevity of your DS18 PRO-X6BM loudspeaker. It is recommended to have this product installed by a professional car audio technician.
Необходимые инструменты и материалы:
- Набор отверток
- Инструмент для зачистки/обжима проводов
- Drill (if custom mounting is required)
- Акустический кабель (подходящего сечения для вашей системы)
- Connectors (spade terminals, butt connectors, etc.)
- Mounting hardware (screws, clips - typically included)
- Sound deadening material (optional, for improved audio quality)
Этапы установки:
- Безопасность прежде всего: Перед началом любых электромонтажных работ отсоедините отрицательную клемму аккумуляторной батареи автомобиля, чтобы предотвратить короткое замыкание.
- Выберите место установки: Identify suitable locations in your vehicle (e.g., door panels, rear deck) that accommodate the speaker's dimensions (6.5" diameter, 2.72" mounting depth). Ensure there is sufficient clearance behind the speaker.
- Подготовьте монтажную поверхность: If replacing existing speakers, remove the old units. If creating new openings, carefully mark and cut the speaker holes according to the cut-out dimension (5.7" / 145mm).
- Проводка: Connect the speaker wires to the terminals on the PRO-X6BM. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues. Use appropriate connectors for secure connections.
- Безопасный динамик: Place the speaker into the mounting opening and secure it using the provided screws. Do not overtighten.
- Подключиться к AmpУсилитель/Головное устройство: Route the speaker wires to your amplifier or head unit. Connect them according to your audio system's wiring diagram. The PRO-X6BM has an 8 Ohm impedance.
- Тестовая система: Reconnect the vehicle's negative battery terminal. Turn on your audio system and test the speakers at a low volume. Gradually increase the volume to ensure proper operation and sound quality.
Инструкция по эксплуатации
Once installed, your DS18 PRO-X6BM loudspeaker is ready for use. Follow these guidelines for optimal audio experience:
- Период обкатки: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the speaker's suspension to loosen up, improving overall sound quality and longevity.
- Регулятор громкости: Always start with a low volume and gradually increase it. Avoid excessive volume levels that cause audible distortion, as this can damage the speakers and your hearing.
- Эквалайзер (EQ): Отрегулируйте головное устройство или amplifier's equalizer settings to fine-tune the sound to your preference. The PRO-X6BM excels in midrange frequencies, so focus on enhancing those without overdriving the speaker.
- Настройки кроссовера: Если использовать внешний amplifier with crossover settings, it is recommended to set a high-pass filter (HPF) to protect the midrange speaker from low bass frequencies it is not designed to reproduce. Consult your amplifier's manual for recommended settings.
Обслуживание
To ensure the longevity and optimal performance of your DS18 PRO-X6BM loudspeakers, follow these simple maintenance tips:
- Регулярная уборка: Gently wipe the speaker cones and surrounds with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
- Проверьте соединения: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor sound quality or speaker damage.
- Избегайте перегрузки: Do not continuously play music at distortion-inducing volumes. This can overheat the voice coil and lead to permanent damage.
- Охрана окружающей среды: While designed for automotive use, avoid exposing speakers to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Поиск неисправностей
If you experience issues with your DS18 PRO-X6BM loudspeaker, refer to the following troubleshooting guide:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет звука из динамика | Loose or disconnected wiring; amplifier off or in protect mode; incorrect head unit settings; damaged speaker. | Проверьте надежность крепления всех проводов динамиков и правильность полярности. amplifier is powered on and not in protect mode. Ensure head unit balance/fader settings are correct. Test speaker with another known good audio source or speaker. |
| Искаженный звук | Слишком высокая громкость; неправильно amplifier gain settings; improper crossover settings; damaged speaker. | Уменьшите громкость. Отрегулируйте amplifier gain settings to prevent clipping. Verify high-pass filter (HPF) is set correctly to prevent bass frequencies from reaching the midrange speaker. Inspect speaker cone for physical damage. |
| Слабый или приглушенный звук | Incorrect wiring polarity; poor speaker placement; EQ settings. | Double-check speaker wire polarity. Ensure speakers are not obstructed. Adjust EQ settings on your head unit or amplifier to enhance midrange frequencies. |
Гарантия и поддержка
DS18 products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your product or visit the official DS18 website. General warranty information includes:
- Ограниченная гарантия: This product typically comes with a limited manufacturer's warranty.
- Политика возврата: Products purchased may be eligible for a 30-day refund or replacement policy.
- Расширенные планы защиты: Optional 2-Year and 3-Year protection plans are available for purchase to extend coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact DS18 customer service through their official channels.
