Введение
This manual provides detailed instructions for the installation, operation, and maintenance of your KES Kitchen Sink Pull Down Faucet Head Replacement, Model PFS4-BN. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image: KES Kitchen Sink Pull Down Faucet Head Replacement, Brushed Nickel finish.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | КЕС |
| Номер модели | PFS4-BN |
| Материал | Пластик |
| Тип отделки | Матовый никель |
| Тип установки | Навинчивающийся |
| Количество настроек | 2 (Stream, Spray) |
| Скорость потока | 1.8 галлона в минуту |
| Специальная характеристика | Removable Flow Restrictor |
| Размеры продукта | 8.46 x 2.64 x 2.64 дюйма |
| Вес товара | 4.6 унции |
Совместимость
This replacement faucet head is designed to fit most standard G 1/2 connectors (20.5mm or 0.8 inches Outer Diameter). It is не совместимо with NPT or 1/2 inch NPT connectors. Please verify your existing hose connection size before installation.
Image: Diagram illustrating the compatible G 1/2 connector (20.5mm or 0.8" OD) and incompatible NPT (1/2 inch or 0.5 inch) connector types.
Изображение: Крупный план view of the G 1/2 connector on the KES faucet head, showing the threaded connection and washer.
Настройка и установка
Follow these steps to install your new KES faucet head:
- Подготовка: Turn off the water supply to your kitchen sink.
- Remove Old Faucet Head: Unscrew your existing pull-down faucet head from the hose. You may need a wrench if it's tightly secured.
- Осмотрите шланг: Ensure the hose end is clean and free of debris. Check for any existing washers or O-rings that might need to be replaced.
- Install New Faucet Head:
- Ensure the rubber washer is properly seated inside the new faucet head's connector.
- Screw the new KES faucet head onto your existing pull-down hose. Hand-tighten first, then use a wrench for a final quarter-turn to ensure a secure, leak-free connection. Do not overtighten.
- Тест на герметичность: Turn the water supply back on slowly. Check for any leaks around the connection point. If leaks occur, tighten slightly more or re-seat the washer.
Image: The KES faucet head disassembled, showing the main body, washer, and flow restrictor component, ready for installation.
Инструкция по эксплуатации
Your KES Kitchen Sink Pull Down Faucet Head features two spray functions for versatile use:
- Аэрированный поток: This mode provides a steady, aerated flow of water, ideal for filling pots and general washing.
- Мощный спрей: This mode delivers a strong, wide spray, effective for rinsing dishes and cleaning the sink.
To switch between the two modes, press the button located on the top of the faucet head. The button toggles between the aerated stream and the powerful spray.
Video: Demonstration of the KES Kitchen Pull Out Replacement Head, showing the two spray modes (stream and spray) and ease of switching.
Image: Visual representation of the faucet head's two functions: aerated stream and spray mode, with the toggle button highlighted.
Image: The KES faucet head in spray mode, effectively rinsing a dirty plate.
Обслуживание
Regular maintenance ensures optimal performance and extends the life of your faucet head:
- Чистящие насадки: The faucet head features self-cleaning medical TPE nozzles. To clean, gently rub the rubber nozzles with your finger or a soft brush to remove mineral buildup.
- Внешняя очистка: Clean the exterior of the faucet head with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish.
- Flow Restrictor: The faucet head includes a removable flow restrictor. If you experience reduced water flow, you may check and clean the flow restrictor for any debris. Refer to the diagram for its location.
Image: Close-up of the faucet head showing the self-cleaning medical TPE nozzles and multi-mesh aerator for an aerated, quiet, and no-splash stream.
Изображение: подробное view of the removable flow restrictor located within the faucet head's connection point.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Вода протекает из соединения. | Loose connection or improperly seated washer. | Ensure the faucet head is securely tightened. Check that the rubber washer is correctly positioned. |
| Уменьшенный расход воды. | Clogged nozzles or flow restrictor. | Clean the TPE nozzles by gently rubbing them. Inspect and clean the removable flow restrictor for debris. |
| Возникают трудности с переключением режимов распыления. | Mineral buildup in the toggle mechanism. | Clean the button area and surrounding mechanism. If persistent, soak the head in a vinegar solution to dissolve mineral deposits. |
Информация о гарантии
KES products are backed by a Lifetime Limited Warranty. This warranty covers defects in material and manufacturing. For detailed information regarding warranty terms and conditions, please refer to the official KES webсайт или обратитесь в службу поддержки клиентов.
Image: KES product features including Lifetime Limited Warranty and Free Replacement Parts.
Поддержка клиентов
For any questions, assistance, or replacement parts, please contact KES customer support. KES offers 24-hour customer support and 1-on-1 follow-up to ensure customer satisfaction.
You can find contact information on the official KES webсайт: Visit the KES Store on Amazon
Image: KES customer-oriented services including 24-hour support, 1-on-1 follow-up, and free replacement parts.
