Инструкция по эксплуатации 2-канального диджейского микшера Numark M2 Scratch.

1. Введение

1.1 продукта болееview

The Numark M2 is a robust 2-channel scratch DJ mixer designed for both beginners and experienced DJs. It provides essential mixing functionalities, including a 3-band equalizer on each channel, a microphone input, and a replaceable crossfader with reverse and slope controls. Its durable construction ensures reliable performance in various environments, from home setups to clubs.

1.2 Основные характеристики

• Versatile 2-Channel Design: Suitable for various DJ applications.
• Комплексное подключение: Features two phono/line switchable RCA inputs, two line RCA inputs, and a 1/4-inch microphone input. Outputs include master (RCA), record (RCA), and 1/4-inch stereo headphone.
• Регулировка микса: Dedicated channel level faders and a replaceable crossfader with reverse and slope controls.
• Audio Shaping: Three-band EQs on each channel for precise sound adjustment.
• Прочная конструкция: Solid steel chassis for rugged, reliable performance, with rackmount facilities included.

2. Что в коробке

• Numark M2 Mixer
• Адаптер питания
• Инструкция по началу работы
• Информация о безопасности и гарантии

3. Настройка

3.1 Connecting Your Mixer

Before connecting any devices, ensure the Numark M2 mixer and all audio equipment are powered off. Connect your turntables, CD players, or other audio sources to the appropriate RCA inputs on the rear panel. Connect your main output to your amplifier or powered speakers, and your headphones to the front panel headphone jack.

1. Подключение питания: Connect the included power adapter to the M2's power input and then to a power outlet. Do not power on the unit yet.
2. Аудио входы:
   • Connect your turntables to the PHONO inputs for channels 1 and 2. Ensure the PHONO/LINE switch is set to PHONO. Connect the turntable's ground wire to the M2's ground terminal.
   • Connect CD players or other line-level devices to the LINE inputs for channels 1 and 2. Ensure the PHONO/LINE switch is set to LINE.
3. Вход микрофона: Connect a 1/4-inch microphone to the MIC input on the rear panel.
4. Основной вывод: Connect the MASTER RCA outputs to your ampусилитель, активные колонки или система звукоусиления.
5. Выход записи: Connect the RECORD RCA outputs to a recording device if you wish to capture your mix.
6. Выход для наушников: Connect your 1/4-inch stereo headphones to the headphone jack on the front panel.
7. Once all connections are made, you may power on your audio sources, then the Numark M2 mixer, and finally your ampгромкоговорители/динамики.

4. Операция

4.1 Органы управления на передней панелиview

The front panel of the Numark M2 provides access to all essential mixing controls, including channel faders, EQ knobs, crossfader, and microphone controls.

4.2 канала управления

Each of the two channels features dedicated controls for audio input and equalization.

• Регулятор усиления: Adjusts the input level for the respective channel. Set this to achieve a strong signal without clipping (distortion).
• TREBLE, MID, BASS Knobs: These are 3-band EQ controls. Turn clockwise to boost frequencies and counter-clockwise to cut them.
• Переключатель PHONO/LINE: Selects between phono (turntable) and line (CD player, media player) input sources for the channel.
• Фейдер канала: Controls the volume level of the channel's audio output.

4.3 микрофонных входа

The M2 includes a dedicated microphone input with its own set of controls.

• Ручка усиления микрофона: Adjusts the input level of the connected microphone.
• MIC TREBLE Knob: Adjusts the high frequencies of the microphone signal.
• MIC BASS Knob: Adjusts the low frequencies of the microphone signal.

4.4 Master Output

The master section controls the overall output level and cueing functions.

• МАСТЕР Ручка: Controls the overall volume level of the main mix output.
• Светодиодные измерители уровня: Provide visual feedback of the master output level. Aim for levels that are strong but do not consistently peak into the red.

4.5 Сигналы

The cue section allows you to monitor channels through your headphones independently of the master output.

• CUE GAIN Knob: Регулирует уровень громкости выхода на наушники.
• CUE Buttons (CH1/CH2): Press to send the audio from the corresponding channel to your headphones.
• CUE FADER: Blends between the cued channels in your headphones.

4.6 Crossfader Controls

The crossfader allows for smooth transitions between channels.

• Кроссфейдер: Slides horizontally to blend audio between Channel 1 (left) and Channel 2 (right).
• CF SLOPE Switch: Adjusts the curve of the crossfader. A sharper slope is ideal for scratching, while a gentler slope is better for smooth mixing.
• CF MODE (NORMAL/REVERSE) Switch: Reverses the direction of the crossfader. In reverse mode, moving the fader to the left will play Channel 2, and to the right will play Channel 1.

5. Техническое обслуживание

5.1 Очистка

Regular cleaning helps maintain the performance and longevity of your mixer.

• Всегда отключайте адаптер питания перед чисткой.
• Use a soft, dry cloth to wipe down the exterior of the mixer.
• Для стойких загрязнений слегкаamp Можно использовать тряпку, а затем протереть сухой тряпкой. Избегайте использования агрессивных химикатов или абразивных чистящих средств.
• Keep liquids away from the faders and knobs to prevent damage.

5.2 Хранение

When not in use, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. If transporting, use a protective case to prevent physical damage.

6. Поиск Неисправностей

If you encounter issues with your Numark M2 mixer, consider the following basic troubleshooting steps:

• Нет питания: Убедитесь, что адаптер питания надежно подключен как к микшеру, так и к исправной розетке. Проверьте выключатель питания на задней панели.
• Нет звука на выходе:
  • Verify all audio cables are correctly connected to the appropriate inputs and outputs.
  • Check that the PHONO/LINE switches are set correctly for your input sources.
  • Ensure channel faders and the master volume knob are turned up.
  • Подтвердите свой amplifier or powered speakers are turned on and their volume is adjusted.
• Искаженный звук:
  • Reduce the GAIN knobs for individual channels and the MASTER knob to prevent clipping (indicated by red LEDs on the level meters).
  • Check the input levels from your audio sources.
• Жужжащий/жужжащий шум: Ensure all ground wires from turntables are properly connected to the mixer's ground terminal. Check for loose cable connections.
• Crossfader Issues: If the crossfader feels stiff or unresponsive, it may require cleaning or replacement. Refer to the maintenance section or contact support.

For further assistance, please contact Numark customer support.

7. Технические характеристики

8. Гарантия и поддержка

For warranty information and technical support regarding your Numark M2 mixer, please refer to the included Safety & Warranty Information document or visit the official Numark website. You can also contact Numark customer service directly for assistance with product registration, troubleshooting, or service inquiries.

Интернет-ресурсы: www.numark.com