Введение
This instruction manual provides essential information for the proper installation, usage, and maintenance of your Breeze TB300 Standard T-Bolt Clamps. Please read this manual thoroughly before installation to ensure safe and effective operation.
Продукт болееview
The Breeze TB300 Standard T-Bolt Clamp is designed for high-strength clamping applications, particularly for securing hoses or pipes. It features a robust construction suitable for demanding environments.
Figure 1: A stainless steel T-Bolt clamp, showing the band, bolt, and nut mechanism. This clamp is designed for securing hoses or pipes in various applications.
Основные характеристики:
- 3/4" (19 mm) wide, 100% Stainless Steel Band: Ensures durability and corrosion resistance.
- High Strength, One-Piece Stainless Steel Trunnion: Provides robust connection and secure fastening.
- Superior welded construction: Enhances overall strength and reliability.
- Соответствует или превосходит спецификацию SAE J1508 для Т-образных болтов.amps: Guarantees adherence to industry standards for performance.
Установка и настройка
Правильная установка имеет решающее значение для работоспособности и долговечности Т-образного болта.amp. Follow these steps for secure attachment:
- Подготовьте соединение: Ensure the hose or pipe ends are clean and free from debris.
- Расположите Clamp: Сдвиньте Т-образный болтamp over the hose or pipe, positioning it correctly over the connection point.
- Align the Bolt: Align the T-bolt with the trunnion and thread the nut onto the bolt.
- Затяните гайку: Используя подходящий гаечный ключ, постепенно затягивайте гайку. Прикладывайте равномерное усилие, чтобы обеспечить однородный затяжной механизм.amping force around the circumference of the hose.
- Проверьте надежность фиксации: Continue tightening until the hose is firmly secured and there is no leakage (if applicable). Avoid over-tightening, which can damage the hose or the clamp.
- Verify Torque (Recommended): If a specific torque specification is available for your application, use a torque wrench to achieve the recommended torque value.
Использование и эксплуатация
Once installed, the T-Bolt clamp provides a secure and reliable connection. Its operation is passive, maintaining the integrity of the connection under various pressures and vibrations. Regular inspection is recommended to ensure continued performance.
Обслуживание
To maximize the lifespan and effectiveness of your Breeze TB300 T-Bolt Clamps, consider the following maintenance practices:
- Регулярный осмотр: Периодически проверяйте кл.amps for any signs of wear, corrosion, or damage. Check for loose nuts or bolts.
- Уборка: If operating in dirty or corrosive environments, clean the clamps as needed to prevent buildup that could affect performance.
- Re-tightening: Over time, vibrations or material settling may cause the clamp to loosen slightly. Re-tighten the nut if necessary to maintain optimal clampсила.
- Замена: Если клamp shows significant signs of damage, deformation, or severe corrosion, replace it immediately to prevent failure.
Поиск неисправностей
While T-Bolt clamps are generally reliable, issues can arise. Here are some common problems and their solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Leakage at connection point | Clamp not tight enough; improper hose seating; damaged hose/fitting. | Затяните крепление.amp further (do not over-tighten); re-seat the hose; inspect and replace damaged components. |
| Clamp appears loose | Vibration; material compression; insufficient initial tightening. | Re-tighten the nut; consider using a locking washer if vibrations are severe. |
| Clamp corrosion/damage | Exposure to harsh chemicals; physical impact; end of service life. | Заменить clamp. Ensure proper material selection for the environment. |
Технические характеристики
The following are the key specifications for the Breeze TB300 Standard T-Bolt Clamp:
- Номер модели: ТБ-300
- Effective Diameter Range: 3" - 3.31" (76.2 мм - 84.1 мм)
- Ширина полосы: 3/4" (19 мм)
- Материал: 100% Stainless Steel Band, High Strength One-Piece Stainless Steel Trunnion, Plated Carbon Steel Bolt.
- Согласие: Соответствует или превосходит спецификацию SAE J1508 для Т-образных болтов.amps.
- Вес товара: 2 Pounds (for the pack of 10)
- Производитель: Breeze Ind. Products
Гарантия и поддержка
Specific warranty details for the Breeze TB300 Standard T-Bolt Clamps are not provided in this manual. For warranty information or technical support, please contact Breeze Industrial Products directly or refer to their official webсайт.
