Prime TNOREM02

Руководство пользователя пульта дистанционного управления Prime TNOREM02 для наружного использования с 2 розетками и беспроводным передатчиком.

Model: TNOREM02

Введение

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Информация по безопасности

Перед использованием данного изделия внимательно ознакомьтесь со всеми инструкциями по технике безопасности. Несоблюдение этих инструкций может привести к поражению электрическим током, возгоранию или серьёзной травме.

Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Характеристики продукта

Close-up of Prime TNOREM02 Receiver Outlets

Изображение: крупный план view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Настраивать

  1. Выберите местоположение: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Подключите приемник: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Подключаемые устройства: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattagПотребляемая мощность подключенных устройств не должна превышать 1875 Вт.
  4. Подготовка передатчика: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Инструкция по эксплуатации

Using the Prime TNOREM02 is straightforward:

Обслуживание

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Надежно закройте крышку батарейного отсека.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Поиск неисправностей

ПроблемаВозможная причинаРешение
Устройства не включаются/выключаются.
  • Батарея передатчика разряжена или установлена ​​неправильно.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Сработала защита от перегрузки.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Снижен радиус действия беспроводной связи.
  • Препятствия между передатчиком и приемником.
  • Разряжена батарея передатчика.
  • Помехи от других беспроводных устройств.
  • Переместите приемник или передатчик таким образом, чтобы минимизировать препятствия.
  • Замените батарею передатчика.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Внутренний сбой компонента.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Технические характеристики

ОсобенностьДеталь
Номер моделиTNOREM02
БрендОсновной
Количество розеток2 (3-prong grounded)
Тип проводаSJTW 14/3 Gauge
Тип вилкиRight Angle, Grounded
ИспользованиеНа открытом воздухе
Макс Вт1875 Вт
Макс Amps15 Amps
Максимальное напряжение125 Вольт
Максимальная мощность в лошадиных силах1 / 3 HP
Дальность беспроводной связиДо 80 футов
Аккумулятор передатчикаCR2032 3V Button-Cell
Размеры продукта8 x 6.2 x 2.1 дюйма (приблизительно)
Вес товара0.01 ounces (for remote control)
Технология связиBluetooth
СертификатыNot explicitly detailed, but designed for outdoor electrical use.

Гарантия и поддержка

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webсайт или свяжитесь со службой поддержки клиентов.

Связанные документы - TNOREM02

Предварительноview Руководство пользователя и нормативная информация по розеткам PRIME SmartOutlets + пульту дистанционного управления
Подробное руководство по использованию PRIME SmartOutlets + пульт дистанционного управления, охватывающее настройку, повторную синхронизацию, гарантию и соответствие нормативным требованиям FCC/IC. Узнайте, как использовать и устранять неполадки в ваших устройствах умного дома.
Предварительноview Настенный смеситель PRIME с двумя розетками и USB-зарядными устройствами — руководство пользователя и гарантия.
Подробные инструкции, нормативная информация и сведения о гарантии на настенный розеточный блок PRIME 2 с USB-зарядными устройствами (модель USB05) от компании Prime Wire & Cable, Inc.
Предварительноview Информация об установке и безопасности PRIME SmartOutlets
Инструкции по установке, информация по технике безопасности и технические характеристики интеллектуальных уличных розеток PRIME SmartOutlets с дистанционным управлением. Включает руководство по настройке, подключение к приложению и информацию о соответствии нормативным требованиям.
Предварительноview Цифровой таймер для помещений Prime EZ-Set TNIDP12: руководство пользователя и инструкция по программированию.
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.
Предварительноview Цифровой 24-часовой таймер PRIME EZ-SET (модель #TNIDEZ1) - Инструкция по эксплуатации
Инструкция по эксплуатации цифрового 24-часового таймера PRIME EZ-SET (модель #TNIDEZ1), содержащая информацию о программировании, функциях, устранении неполадок, технике безопасности, технических характеристиках и гарантии.
Предварительноview Руководство пользователя сверхтонкого светодиодного рабочего фонаря PRIME LEDWLRHH02
Руководство пользователя сверхтонкого аккумуляторного светодиодного рабочего фонаря PRIME LEDWLRHH02. Содержит инструкции по началу работы, эксплуатации, чистке, обслуживанию, устранению неисправностей и информацию о гарантии.