Инструкция по эксплуатации радиоуправляемой машинки WFLY X9

1. Введение

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. Продукт закончилсяview

2.1 Основные характеристики

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 Что в коробке

• WFLY X9 Transmitter
• RG206S Receiver

2.3 Компоненты продукта

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

Рисунок 2: Подробный view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltagе, внешний объемtage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. Настройка

3.1 Установка батареи передатчика

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. Откройте крышку батарейного отсека.
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. Плотно закройте крышку батарейного отсека.

Note: The transmitter supports a working voltagдиапазон от 3.5В до 6.0В.

3.2 Подключение приемника

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltagдиапазон от 3.5В до 9.0В.

3.3 Процедура связывания

To establish communication between the transmitter and receiver, a binding process is required:

1. Выключите передатчик и приемник.
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Initiate the binding process from the transmitter.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. Операция

4.1 Основные элементы управления

• Руль: Controls the left/right direction of your RC vehicle.
• Дроссельный триггер: Потяните, чтобы ускорить движение вперед, нажмите, чтобы затормозить или дать задний ход.
• Планка: Adjust the neutral position of steering and throttle channels for fine-tuning.
• Д/Р (двухскоростной режим): Adjusts the maximum throw of steering or other channels.

4.2 Навигация с помощью сенсорного экрана

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• Главный экран: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• Кнопка меню: Доступ к главному меню настроек.
• Меню пользователя: Customizable shortcuts for frequently used functions.
• Выбор модели: Select from up to 40 stored models, each with its own unique settings.

4.3 дополнительных функции

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• Голосовое вещание: Enable voice prompts for telemetry data or system alerts.
• GPS Support: When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Channel Limit: Protect your servos and mechanical components by setting maximum travel limits for each channel.

5. Техническое обслуживание

5.1 Зарядка передатчика

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 Чистка и хранение

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Remove batteries from the transmitter if storing for extended periods to prevent leakage.

5.3 Обновление прошивки

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6. Поиск Неисправностей

6.1 Общие проблемы

7. Технические характеристики

7.1 Transmitter (WFLY X9)

• Рабочий объемtage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• Рабочий ток: 260~400мА
• Frequency Hopping: FHSS
• Модуляция: ЛОРА
• Приложение: RC cars, boats, tanks, robots, etc.
• Разрешение: 4096
• Диапазон частот: 2.4 ГГц (двусторонний)
• Мощность передачи: ≤100мВт
• Диапазон: >600m (ideal conditions)
• Рабочая температура: -10℃ до +60℃
• Simulator Interface: 3.5mm (PPM)
• Хранилище: память на 40 моделей
• Program Mix: 5 моделей
• Голосовое вещание: Поддерживать
• Зарядка: Support 1S LiPo battery (Type C)
• Язык: Английский
• Обновление: USB online upgrade
• Сервопривод: Поддерживать
• Отображать: 3.5” 480*320 capacitive touch screen
• Размеры: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• Масса: 318 г

7.2 Receiver (RG206S)

• Название модели: RG206S
• Каналы: 6 channels (PWM)
• Рабочий ток: 95мА
• Диапазон частот: 2.4GHz (two-way transmission)
• Рабочий объемtage: 3.5В~9.0В
• Модуляция: ЛОРА
• GPS: Support speed detection
• Приложение: RC cars, boats, tanks, robots, etc.
• Разрешение: Full channel 4096
• Рабочая температура: -10℃ до +60℃
• Внешний объемtagОбнаружение: Постоянный ток 1~36 В
• ППМ: Support 180/270°
• W. АВТОБУС: Support S.BUS
• Обновление: USB online upgrade
• Размеры: 33.6 х 22.3 х 12.3 мм
• Масса: 7.6 г

7.3 Физические размеры

• Product Dimensions (Transmitter): 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• Item Weight (Total): 1.54 фунта

8. Гарантия и поддержка

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's webсайт с информацией о гарантии.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.