Смеситель для раковины в ванной комнате Project Source Chrome с двумя ручками и межосевым расстоянием 4 дюйма, система WaterSense (слив в комплекте). Инструкция по эксплуатации.

Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Продукт болееview

The Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet is designed for both home and RV use, offering a modern aesthetic with practical features.

Основные характеристики:

• Home and RV Compatible
• 3-hole Deck Mount Installation on 4-in center
• Meets WaterSense criteria to conserve water without sacrificing performance, with a max flow rate of 1.2-GPM
• Sleek low arc spout allows plenty of sink space
• Easy Installation with Drop and Lock Drain

Рисунок 1: Передний view of the Project Source Chrome 2-Handle Bathroom Sink Faucet, showcasing its polished chrome finish and modern design.

Рисунок 2: The Project Source Chrome Faucet installed on a white bathroom vanity, highlighting its compact and elegant profile.

Рисунок 3: Сторона view of the Project Source Chrome Faucet, demonstrating the clearance provided by its low arc spout above the sink basin.

Настройка и установка

This faucet is designed for 3-hole deck mount installation on 4-inch centers. The included Drop and Lock Drain simplifies the installation process.

Installation Steps for Drop & Lock Drain:

1. Drop & Lock: Insert the drain assembly into the sink drain hole.
2. Замок: Secure the drain from underneath the sink by tightening the locking mechanism.
3. Adjust: Make any necessary adjustments to ensure a proper seal and alignment.

Рисунок 4: Visual guide for the 'Drop & Lock' drain installation, illustrating the three simple steps for quick setup.

For detailed faucet body installation, refer to the separate installation guide provided with your product packaging.

Инструкция по эксплуатации

The Project Source faucet features a two-handle design for precise control over water temperature and flow.

Контроль расхода и температуры воды:

• The left handle controls the hot water supply. Turn the handle counter-clockwise to increase hot water flow.
• The right handle controls the cold water supply. Turn the handle counter-clockwise to increase cold water flow.
• Adjust both handles simultaneously to achieve the desired water temperature and flow rate.
• To turn off the water, rotate both handles clockwise until the flow stops completely.

Обслуживание

Regular cleaning and maintenance will help preserve the finish and functionality of your Project Source faucet.

Чистка крана:

• Очистите хромированную поверхность мягкой тряпкой.amp ткань.
• Use mild soap and water if necessary. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Wipe dry with a soft cloth to prevent water spots and maintain shine.

Техническое обслуживание аэратора:

• Если поток воды уменьшается или становится нерегулярным, аэратор может быть засорен.
• Carefully unscrew the aerator from the end of the spout.
• Rinse the aerator screen under running water to remove any debris.
• Соберите аэратор и прикрутите его обратно к изливу.

Поиск неисправностей

Если у вас возникли какие-либо проблемы с краном, воспользуйтесь следующими распространенными советами по устранению неполадок:

• Низкий расход воды: Проверьте, не засорился ли аэратор (см. раздел «Техническое обслуживание»). Убедитесь, что запорные вентили подачи воды полностью открыты.
• Утечка из носика: Turn off water supply. Check for loose connections or worn washers/gaskets within the faucet body. Consult a professional plumber if the issue persists.
• Leaking from Handles: Tighten handle screws. If leaking continues, the cartridge may need replacement.
• Нет горячей/холодной воды: Verify that the hot/cold water supply lines are connected correctly and the corresponding shut-off valves are open.

For more complex issues or if troubleshooting steps do not resolve the problem, contact Project Source customer support or a qualified plumber.

Технические характеристики

Гарантия и поддержка

Project Source products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product packaging or visit the official Project Source website. For technical support, replacement parts, or any other inquiries, please contact Project Source customer service.