1. Введение
Спасибо за покупкуasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.
Рисунок 1.1: Передняя часть view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.
2.Основные характеристики
- IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
- Функция мультитаймера: Capable of memorizing and running up to 8 individual timer settings sequentially.
- Функция повтора: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
- Двойное уведомление о тревоге: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
- Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
- Функция памяти: Stores frequently used timer settings for quick recall.
- Магнитная подложка: Equipped with a magnet for convenient attachment to metal surfaces.
Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.
Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.
3. Настройка
3.1. Содержимое упаковки
- A&D Waterproof Interval Timer AD-5709TL
- Руководство по эксплуатации
- CR2032 Lithium Battery (for monitor use)
3.2. Установка аккумулятора
The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.
- Найдите отсек для батареек на задней панели таймера.
- Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
- Вставьте батарею CR2032 положительным (+) полюсом вверх.
- Установите крышку батарейного отсека на место и поверните ее по часовой стрелке для фиксации.
Рисунок 3.1: Сзади view of the timer, illustrating the battery compartment and the CR2032 battery for installation.
3.3. Первоначальное включение
Once the battery is correctly installed, the timer will automatically power on and display '00:00'.
4. Операция
4.1 Функции кнопок
| Кнопка | Функция |
|---|---|
| 1分 (1 Minute) | Adds 1 minute to the timer setting. |
| 10秒 (10 Seconds) | Adds 10 seconds to the timer setting. |
| 10分 (10 Minutes) | Adds 10 minutes to the timer setting. |
| スタート/ポーズ (Start/Pause) | Starts or pauses the timer. |
| ストップ (Stop) | Stops the timer and resets it to the last set time or zero. |
| メモリ (Memory) | Recalls stored timer settings. |
| リセット (Сброс) | Resets the timer to 00:00. (Often combined with Stop or a long press of Stop) |
4.2. Setting a Countdown Timer
- Ensure the timer display is '00:00'. If not, press the Останавливаться кнопка для сброса.
- Используйте 1分, 10秒, и 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
- Нажмите スタート/ポーズ кнопку, чтобы начать обратный отсчет.
- Чтобы приостановить обратный отсчет, нажмите スタート/ポーズ Нажмите ещё раз, чтобы продолжить.
- When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
- Нажмите Останавливаться button to silence the alarm and reset the timer to the last set time.
4.3. Using Multiple Timers (Sequential Operation)
The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.
- Set the first timer duration using the 1分, 10秒, и 10分 кнопки.
- Нажмите メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
- Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
- Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
- The alarm will sound after each step completes, and the timer will automatically proceed to the next step.
Рисунок 4.1: Example of sequential timer operation with multiple steps and repeat functionality.
4.4. Функция повтора
After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.
- After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
- Используйте 1分, 10秒, и 10分 buttons to adjust the repeat count from 1 to 999.
- To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
- Нажимать スタート/ポーズ to start the repeating timer sequence.
4.5. Count-up Function
To use the count-up function:
- Ensure the timer display is '00:00'.
- Нажмите スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
- Нажимать スタート/ポーズ again to pause the count-up.
- Нажмите Останавливаться button to stop the count-up and reset the display to '00:00'.
5. Техническое обслуживание
5.1. Уборка
Для очистки таймера протрите его мягкой тряпкой.amp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.
5.2. Замена батареи
When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.
5.3. Хранение
Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.
6. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Таймер не включается. | Аккумулятор разряжен или неправильно установлен. | Replace the battery with a new CR2032, ensuring correct polarity. |
| Дисплей тусклый или мерцает. | Низкий заряд батареи. | Замените аккумулятор. |
| Будильник слишком громкий. | Buzzer volume is fixed. | The buzzer volume is approximately 65dB at 15cm and cannot be adjusted. Consider using the LED alarm only if available (not a direct feature on this model, but a general suggestion). |
| Таймер не реагирует на нажатия кнопок. | Временный сбой программного обеспечения или низкий заряд батареи. | Извлеките и снова вставьте батарею. Если проблема не исчезнет, замените батарею. |
| Sequential timers do not advance. | Incorrect setting or timer paused. | Ensure all steps are correctly saved using the Memory button. Check if the timer is paused. |
7. Технические характеристики
| Спецификация | Деталь |
|---|---|
| Номер модели | АД-5709ТЛ |
| Размеры (Д x Ш x В) | 6.8 х 6.8 х 1.6 см |
| Масса | Около 60 г |
| Цвет | Белый |
| Диапазон настройки | Max 99 minutes 50 seconds, Min 10 seconds |
| Number of Timers | Up to 8 sequential timers |
| Повторить счет | 1 to 999 times, or infinite |
| Alarm Duration (Buzzer) | 5 секунд / 30 секунд |
| Alarm Duration (LED) | Approx. 30 seconds blinking red LED |
| Громкость зуммера | Approx. 65dB (at 15cm distance) |
| Водонепроницаемость | Эквивалент IPX7 |
| Источник питания | Литиевая батарея CR2032 x 1 |
Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.
8. Гарантия и поддержка
This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official webна сайте или у продавца, у которого вы приобрели товар. Сохраните чек для подтверждения гарантии.
For more information, visit the official A&D webсайт: www.aandd.co.jp