Введение
This manual provides comprehensive instructions for the setup, operation, and maintenance of your MaXimum Mini-Max Remote Reading Thermometer. This precision instrument allows you to monitor outdoor temperatures from an indoor location, featuring a durable brass case and a clear silver dial with dual Fahrenheit and Celsius scales.
Продукт болееview
Изображение 1: The MaXimum Mini-Max Remote Reading Thermometer. This image displays the front view of the thermometer, highlighting its polished brass casing and the silver-colored dial. The dial features clear markings for both Fahrenheit and Celsius temperature scales, along with a central needle indicating the current temperature. A small toggle switch is visible at the bottom of the case, used for resetting the memory function.
The MaXimum Mini-Max Thermometer is designed for accurate remote temperature monitoring. It includes a remote sensor and an AC adapter for continuous operation. The instrument tracks both the current temperature and records the highest and lowest temperatures since the last reset.
Настраивать
- Распаковка: Carefully remove the thermometer, remote sensor, and AC adapter from the packaging. Inspect all components for any signs of damage.
- Установка основного блока: Select an indoor wall location for the main thermometer unit. Ensure it is away from direct sunlight, heat sources, or drafts that could affect its internal temperature. Securely mount the unit using appropriate hardware (not included).
- Positioning the Remote Sensor:
- Choose an outdoor location for the sensor that is protected from direct sunlight and precipitation. An ideal spot would be under an eave or on a north-facing wall.
- Ensure the sensor is positioned where it can accurately measure ambient air temperature, away from heat-radiating surfaces or vents.
- The sensor comes with a 60-foot cable. Route the cable carefully to the main unit, avoiding kinks or damage.
- Подключение датчика: Plug the remote sensor cable into the designated port on the main thermometer unit.
- Подключение питания: Connect the AC adapter to the main thermometer unit and then plug it into a standard electrical outlet.
- Initial Calibration (Temperature Minder): The thermometer features an adjustable Temperature Minder. To set it, gently rotate the outer bezel until the indicator aligns with the current outdoor temperature, as read by the main needle. This allows you to easily observe temperature changes relative to a set point.
Инструкция по эксплуатации
- Reading Current Temperature: The main needle on the silver dial indicates the current outdoor temperature. The dial displays temperatures in both Fahrenheit and Celsius.
- Reading Mini-Max Temperatures:
- The thermometer records the highest (Max) and lowest (Min) temperatures reached since the last reset.
- К view the recorded high temperature, move the toggle switch located at the bottom of the case to the верно. The indicator needle will move to the highest temperature recorded.
- К view the recorded low temperature, move the toggle switch to the левый. The indicator needle will move to the lowest temperature recorded.
- Resetting Mini-Max Memory: После viewing the high or low temperature, return the toggle switch to the center position. The indicator needle will reset to the current temperature, clearing the previous high and low records. This allows for tracking new temperature extremes.
Обслуживание
- Уборка: To clean the brass case and silver dial, use a soft, dry cloth. For the brass, a specialized brass cleaner can be used periodically to maintain its luster, following the cleaner's instructions. Avoid abrasive cleaners or solvents.
- Уход за датчиком: Periodically check the outdoor sensor for any debris or obstructions. Ensure the cable remains intact and undamaged.
- Хранилище: If storing the unit for an extended period, disconnect the AC adapter and store it in a dry, temperate environment.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| No temperature reading / Incorrect reading |
|
|
| Mini-Max function not resetting | Toggle switch not returned to center position. | Ensure the toggle switch is firmly in the center position after viewing high/low temperatures. |
| Показания температуры, по-видимому, неточны. |
|
|
Технические характеристики
- Бренд: MaXimum
- Модель: Mini-Max Remote Reading Thermometer
- Тип дисплея: Аналоговый
- Материал корпуса: Латунь
- Dial Material: Алюминий
- Цвет: Silver Dial
- Temperature Scales: Fahrenheit and Celsius (Dual Scale)
- Длина кабеля датчика: 60 футов
- Источник питания: Адаптер переменного тока (входит в комплект)
- Функции: Remote reading, Mini-Max memory function, Adjustable Temperature Minder
- СКП: 888173002911
- ASIN: B00CM02T3W
Гарантия и поддержка
Specific warranty information is not provided in the product details. For warranty claims, technical support, or replacement parts, please refer to the manufacturer's official website or contact MaXimum customer service directly. Please have your model number (Mini-Max Remote Reading Thermometer) and ASIN (B00CM02T3W) available when contacting support.
