Saxby Omega 1W LED Motion Sensor Bathroom Mirror Light with Shaver Socket & Shelf

1. Продукт закончилсяview

The Saxby Omega Bathroom Mirror is a modern, energy-efficient lighting solution designed for bathroom environments. It integrates a 1W LED light, a motion sensor for convenient operation, and a built-in shaver socket, all within a mirrored glass and matt silver frame. This product also features a practical shelf for bathroom essentials.

Рисунок 1: Передняя часть view of the Saxby Omega Bathroom Mirror, showcasing its sleek design, integrated LED lights at the top, and a glass shelf with a shaver socket below.

2. Информация по технике безопасности

Внимательно прочтите все инструкции перед установкой и использованием. Сохраните это руководство для дальнейшего использования.

• Электробезопасность: Installation must be carried out by a qualified electrician in accordance with current wiring regulations (e.g., IEE Wiring Regulations). Ensure the mains supply is switched off at the consumer unit/fuse board before commencing installation or maintenance.
• Зоны ванной комнаты: This product is rated IP44, making it suitable for bathroom zone 2. It can be used in bathroom zone 1 if installed in conjunction with a 30mA RCD (Residual Current Device). Do not install in zone 0.
• Умение обращаться: The mirror is made of glass. Handle with care to prevent breakage and injury.
• Уборка: Always disconnect power before cleaning. Use only a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Вентиляция: Ensure adequate ventilation around the unit as per installation guidelines.

Рисунок 2: Крупный план view highlighting the IP44 rating and the integrated shaver socket, indicating suitability for specific bathroom zones.

3. Содержимое упаковки

Перед началом установки убедитесь, что все компоненты присутствуют и не повреждены.

• Saxby Omega Bathroom Mirror Unit (with integrated LED, motion sensor, shaver socket, and shelf)
• Installation Fixings (screws, wall plugs)
• Руководство по эксплуатации

4. Настройка и установка

Installation should only be performed by a qualified electrician. Ensure the mounting surface is suitable to support the weight of the mirror (approximately 6.95 kg).

1. Подготовка: Switch off the main electrical supply at the consumer unit/fuse board. Identify the desired mounting location, ensuring it is within the appropriate bathroom zone and away from direct water spray.
2. Маркировка: Carefully mark the drilling points on the wall using the mirror's mounting brackets as a template.
3. Бурение: Drill holes at the marked points, ensuring not to damage any hidden wiring or pipes. Insert appropriate wall plugs.
4. Проводка: Connect the mirror's electrical wiring to the mains supply according to the wiring diagram provided with the product and local electrical regulations. Ensure all connections are secure and insulated.
5. Монтаж: Secure the mirror to the wall using the provided fixings. Ensure it is level and firmly attached.
6. Окончательная проверка: Once installed, switch the main electrical supply back on and test the mirror's functions.

Рисунок 3: Боковая проекцияfile of the mirror illustrating its projection from the wall and the location of the shaver socket. Dimensions are H: 500mm, W: 390mm, Proj: 160mm.

5. Инструкция по эксплуатации

• Светодиодное освещение: The mirror features integrated 1W LED lights (2 x 1W LED capsule, cool white). These lights are activated by the motion sensor.
• Motion Sensor (IR Switch): The mirror is equipped with an infrared (IR) motion sensor. To activate the light, simply wave your hand within the sensor's detection range (typically 5-10 cm) in front of the sensor area. Wave again to turn off the light.
• Розетка для бритвы: The built-in shaver socket is designed for use with electric shavers and electric toothbrushes. Ensure the appliance is compatible with the socket's voltage and current rating before use. Do not use for high-power appliances.
• Встроенная полка: The glass shelf provides a convenient storage space for small bathroom items. Do not overload the shelf.

6. Техническое обслуживание

Regular maintenance will ensure the longevity and appearance of your mirror.

• Чистка зеркала: Disconnect power before cleaning. Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid ingress into electrical components.
• Cleaning the Shelf: The glass shelf can be cleaned with a damp Ткань и мягкое моющее средство. Тщательно высушите.
• Общий уход: Do not use harsh chemicals, abrasive materials, or scouring pads, as these can damage the mirror finish or electrical components.

Figure 4: Detail of the integrated glass shelf and the robust construction from glass and steel materials.

7. Поиск Неисправностей

If you encounter issues with your Saxby Omega Mirror, refer to the following common problems and solutions:

8. Технические характеристики

9. Гарантия и поддержка

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Saxby Lighting directly through their official webСайт или каналы обслуживания клиентов. Сохраните чек о покупке для предъявления гарантийных претензий.

Официально Webсайт: www.saxbylighting.com