Продукт болееview
This manual provides essential information for the installation, usage, and maintenance of your new Eurotech Refrigerator Freezer Bottle Holder Rack. This is a genuine replacement part designed to fit various Eurotech refrigerator-freezer models, ensuring your appliance functions optimally and provides convenient storage for bottles.
Image: The Eurotech Refrigerator Freezer Bottle Holder Rack, a white plastic shelf designed for door storage, shown from an angled perspective. It features a long, rectangular shape with raised sides to secure bottles and a front lip for easy handling.
Compatible with the following Eurotech refrigerator-freezer models: nf9002, nf9003, nf9004e, rf4003, rf4004, rf4005e, rf4005ef, rf6003.
Руководство по установке
Follow these steps to correctly install or replace the bottle holder rack in your Eurotech refrigerator-freezer door.
- Подготовка: Ensure your refrigerator is unplugged for safety, especially if you need to reach into tight spaces. Clear any items from the area where the shelf will be installed.
- Remove Old Shelf (if applicable): If replacing an existing shelf, gently lift it upwards and pull it out from its mounting slots on the refrigerator door. Be careful not to force it, as plastic components can be brittle.
- Определите места крепления: Locate the designated slots or rails on the inside of your refrigerator door where the new bottle holder rack will sit. These are typically molded into the door liner.
- Insert New Shelf: Align the tabs or edges of the new Eurotech bottle holder rack with the corresponding slots or rails on the door.
- Закрепите полку: Gently push the shelf downwards until it clicks securely into place. Ensure it is level and stable before placing any items on it.
- Стабильность теста: Lightly press down on the shelf to confirm it is firmly seated and does not wobble.
- Восстановить мощность: Once the shelf is securely installed, you may plug your refrigerator back in.
If you encounter any difficulty, refer to your refrigerator's main instruction manual or contact customer support.
Правила использования
To ensure the longevity and proper function of your bottle holder rack, please observe the following guidelines:
- Грузоподъемность: Do not overload the shelf. While designed for bottles, excessive weight can cause stress on the plastic and lead to damage. Distribute weight evenly.
- Размер бутылки: This rack is primarily designed for standard beverage bottles. Avoid placing oversized or unusually shaped containers that may not fit securely or could damage the shelf.
- Колебания температуры: Avoid placing extremely hot items directly on the shelf, as rapid temperature changes can affect plastic integrity over time.
- Door Movement: Be mindful when opening and closing the refrigerator door, especially if the shelf is heavily loaded, to prevent items from falling or the shelf from dislodging.
Техническое обслуживание и уход
Regular cleaning will help maintain the hygiene and appearance of your bottle holder rack.
- Уборка: Remove the shelf from the refrigerator. Wash it with warm water and a mild dish soap. Avoid abrasive cleaners or scouring pads, as these can scratch the plastic surface.
- Полоскание: Тщательно промойте чистой водой, чтобы удалить все остатки мыла.
- Сушка: Dry the shelf completely with a soft cloth or allow it to air dry before reinstalling it in the refrigerator.
- Пятна: For stubborn stains, a solution of baking soda and water can be used, but test on an inconspicuous area first.
Поиск неисправностей
If you encounter issues with your Eurotech bottle holder rack, refer to the table below for common problems and solutions.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Shelf does not fit into the door slots. | Неправильная совместимость моделей или некорректное выравнивание. | Verify that your refrigerator model is listed as compatible. Ensure the shelf is aligned correctly with the mounting slots before pushing down. Do not force it. |
| Shelf is loose or wobbly after installation. | Not fully seated in the mounting slots. | Remove the shelf and re-install, ensuring it clicks firmly into place on both sides. Check for any obstructions in the slots. |
| Shelf cracked or broke. | Перегрузка, удар или усталость материала. | The shelf needs to be replaced. Ensure you adhere to usage guidelines to prevent future damage. |
Технические характеристики
- Тип продукта: Refrigerator Freezer Bottle Holder Rack / Door Shelf
- Бренд: Евротек
- Номер детали: 358007500
- Код производителя: 651005768
- Материал: Прочный пластик
- Цвет: Белый
- Совместимые модели: Eurotech nf9002, nf9003, nf9004e, rf4003, rf4004, rf4005e, rf4005ef, rf6003
Информация о гарантии
As a genuine replacement part, this Eurotech bottle holder rack is typically covered by the warranty terms provided by Eurotech for their original spare parts. Please retain your proof of purchase. For specific warranty details, including duration and coverage, refer to the documentation that came with your original Eurotech appliance or contact Eurotech customer support directly. Damage due to improper installation, misuse, or overloading is generally not covered under warranty.
Поддержка клиентов
If you have any questions regarding the installation, usage, or compatibility of your Eurotech Refrigerator Freezer Bottle Holder Rack, please contact Eurotech customer support. Have your appliance model number and the part number (358007500 or 651005768) ready when you call for faster service.
For the most up-to-date contact information, please visit the official Eurotech website or refer to the contact details provided with your original appliance documentation.
