Введение
This manual provides instructions for the proper use and maintenance of your Kenmore Replacement Canister Vacuum Bare Surface Floor Brush. This attachment is designed for efficient cleaning of various bare floor surfaces, ensuring a gentle yet thorough clean.
Информация по безопасности
Please read and understand all safety instructions before using this product.
- Always disconnect the vacuum cleaner from the power source before attaching or detaching the brush.
- Ensure the brush is securely attached to the vacuum wand before operation.
- Do not use this brush on wet surfaces or to pick up liquids.
- Держите волосы, свободную одежду, пальцы и все части тела подальше от отверстий и движущихся частей.
Продукт болееview
The Kenmore Bare Surface Floor Brush is a specialized attachment for canister vacuum cleaners, designed to efficiently clean hard floors without scratching. It features durable bristles and a swivel elbow for enhanced maneuverability.
Figure 1: A gray bare surface floor brush attachment for a canister vacuum cleaner, featuring a swivel neck for flexible cleaning.
Parts of the Brush
Familiarize yourself with the components of your new floor brush:
- Головка щетки: The main cleaning surface with bristles.
- Swivel Elbow: Connects the brush head to the vacuum wand, allowing for rotational movement and improved maneuverability.
- Порт подключения: The opening designed to fit compatible vacuum wands, often featuring a button-lock system.
- Horsehair Bristles: Soft, durable bristles for gentle yet effective cleaning of bare surfaces.
Рисунок 2: Крупный план view of the underside of the gray floor brush, highlighting the horsehair bristles and the suction channels designed for dust and debris collection.
Инструкция по установке
Follow these steps to properly attach the floor brush to your Kenmore canister vacuum:
- Определить совместимость: Verify that your Kenmore canister vacuum's wand has a button-lock system compatible with the brush's connection port. Please note: This brush does not fit new style Kenmore models. Check your existing part to ensure a match.
- Выровнять и прикрепить: Align the connection port of the floor brush with the end of your vacuum's wand.
- Безопасное соединение: Push the brush firmly onto the wand until you hear a click, indicating it is securely locked in place. Ensure the connection is stable before use.
- Отсоединение: To remove the brush, press the release button on the vacuum wand and pull the brush off.
Video 1: This video demonstrates the unpacking and attachment process of the Kenmore Canister Vacuum Floor Brush, showing how to connect it to a vacuum wand and highlighting its horsehair bristles.
Инструкция по эксплуатации
This brush is specifically designed for bare floor surfaces. Follow these guidelines for optimal cleaning:
- Пригодность поверхности: The brush is ideal for cleaning hardwood, linoleum, laminate, marble, and tile floors.
- Маневренность: Utilize the swivel elbow to easily navigate around furniture and into tight spaces. The brush's design allows for cleaning under low-lying objects and reaching high areas by adjusting the wand angle.
- Эффективная очистка: The horsehair bristles gently sweep fine dust and debris into the vacuum's suction path, providing thorough cleaning without scratching delicate surfaces.
- Избегайте ковров: This brush is not intended for use on carpets or rugs, as it lacks a rotating brush roll for deep carpet cleaning.
Figure 3: The Kenmore bare surface floor brush in action, effectively cleaning a wooden floor, demonstrating its suitability for hard surfaces.
Техническое обслуживание и уход
Proper maintenance will extend the life and performance of your floor brush:
- Регулярная уборка: Periodically inspect the bristles for accumulated hair or debris. Use scissors to carefully cut away any tangled hair from the bristles.
- Протрите: Wipe the exterior of the brush with a damp Для удаления пыли и грязи используйте тряпку. Не погружайте щетку в воду.
- Хранилище: Store the brush in a dry place, ideally attached to the vacuum or in a designated accessory holder, to prevent damage to the bristles.
Поиск неисправностей
Если у вас возникли какие-либо проблемы, ознакомьтесь со следующими распространенными проблемами и решениями:
Brush Not Picking Up Debris Effectively
- Проверьте щетину: Ensure bristles are clean and free of obstructions.
- Вакуумное отсасывание: Verify that your vacuum cleaner is operating with adequate suction. Check the vacuum's bag/canister and filters.
- Правильное крепление: Confirm the brush is securely attached to the wand.
Brush Not Fitting Vacuum Wand
- Проверка совместимости: Double-check your vacuum model's compatibility with this brush. This brush is designed for specific Kenmore canister models with a button-lock system.
- Inspect Connection Port: Ensure there are no obstructions or damage to the brush's connection port or the vacuum wand.
Технические характеристики продукта
| Особенность | Деталь |
|---|---|
| Бренд | Кенмор |
| Номер модели | 46-1502-01 |
| Материал | Horse Hair |
| Цвет | Серый |
| Конкретные применения | Пол |
| Рекомендация по поверхности | Hardwood, Linoleum, Laminate, Marble, Tile |
| Вес товара | 5 унции |
| Размеры упаковки | 8.94 x 4.49 x 3.46 дюйма |
| СКП | 616469467805 |
Figure 4: A visual representation of the Kenmore bare surface floor brush with key dimensions indicated, including its width and connection port size.
Гарантия и поддержка
For warranty information or technical support regarding your Kenmore Replacement Canister Vacuum Bare Surface Floor Brush, please refer to your original Kenmore vacuum cleaner manual or contact Kenmore customer service directly. Keep your purchase receipt for any warranty claims.
