Руководство пользователя калибратора термопар/петлей Druck DPI822

1. Продукт закончилсяview

The Druck DPI822 is a robust, hand-held instrument designed for the test and calibration of various process parameters, specifically focusing on thermocouple and loop calibration. It offers advanced features for efficient and reliable measurements in industrial applications.

Рисунок 1: Передняя часть view of the Druck DPI822 Thermocouple/Loop Calibrator, showing its display and control buttons.

Key functionalities include simultaneous thermocouple output and mA measurement, a 24V loop power supply for energizing transmitters and control loops, and an automatic switch test for capturing open/closed trip values. It also features a switchable Hart resistor for digital communicators.

2. Содержимое упаковки

Upon unpacking your DPI822 Calibrator, please verify that all the following items are present:

• Druck DPI822 Thermocouple/Loop Calibrator Unit
• Calibration Certificate (NIST-traceable)
• Руководство пользователя (этот документ)
• Set of Test Leads

Если какие-либо предметы отсутствуют или повреждены, немедленно свяжитесь с поставщиком.

3.Основные характеристики

• NIST-traceable calibration certificate with data provided prior to shipment.
• Ability to measure and source thermocouples.
• Advanced cold junction compensation for accurate temperature measurements.
• Large, backlit display for clear visibility in various lighting conditions.
• Menu-driven interface for intuitive navigation.
• mA measure, switch test, and 24V loop power capabilities.

4. Настройка и начальная эксплуатация

4.1 Включение устройства

Ensure fresh batteries are installed in the battery compartment. Press and hold the power button (typically located on the top or side) until the display illuminates.

4.2 Подключение измерительных проводов

Connect the provided test leads to the appropriate input/output terminals on the DPI822. Refer to the labels next to each terminal for correct connection points for thermocouple, mA, and 24V loop power applications.

• For Thermocouple measurements: Connect thermocouple probes to the designated thermocouple input jacks.
• For mA measurements/sourcing: Connect test leads to the mA input/output jacks.
• For 24V Loop Power: Connect to the dedicated 24V output terminals.

4.3 Initial Calibration Check

Although your unit is pre-calibrated, it is good practice to perform a quick functional check. Navigate through the menu to a known measurement or source function and observe the readings. Consult the calibration certificate for expected performance.

5. Инструкция по эксплуатации

5.1 Навигация по меню

The DPI822 features a menu-driven interface. Use the arrow keys (Up/Down/Left/Right) to navigate through options and the 'OK' or 'Enter' button to select. The 'ESC' button typically returns to the previous screen or cancels an operation.

5.2 Thermocouple Measurement and Sourcing

Select the thermocouple function from the main menu. Choose the desired thermocouple type (e.g., Type K, J, T) if prompted. Connect the thermocouple probe to the input terminals for measurement, or connect to the device under test for sourcing a temperature signal.

5.3 mA Measurement and Sourcing

Access the mA function from the menu. For measuring current, connect the DPI822 in series with the circuit. For sourcing current, connect the DPI822 to the input of the device requiring a current signal. Adjust the output value using the navigation keys.

5.4 24V Loop Power Supply

The DPI822 can provide 24V loop power to energize transmitters or control loops. Select the 24V loop power option and connect the appropriate leads to the device requiring power. This feature is useful for testing transmitters without an external power supply.

5.5 Automatic Switch Test

To perform an automatic switch test, select this function from the menu. Connect the DPI822 to the switch or safety system. The calibrator will automatically capture open/closed trip values, providing a fast and accurate check of the system's response.

5.6 Hart Resistor Integration

When using a Hart digital communicator, the DPI822 allows for a 250Ω Hart resistor to be switched into the loop. This eliminates the need to carry a separate resistor. Consult the menu for the option to enable or disable the Hart resistor.

6. Техническое обслуживание

6.1 Очистка

Clean the exterior of the DPI822 with a soft, damp Протрите тканью. Не используйте абразивные чистящие средства или растворители. Убедитесь, что влага не попадает в устройство через порты или отверстия.

6.2. Замена батареи

When the low battery indicator appears on the display, replace the batteries immediately. Refer to the battery compartment cover for the correct battery type and polarity. Always use high-quality batteries.

6.3 Хранение

Store the DPI822 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

6.4 Повторная калибровка

For continued accuracy and compliance with quality standards, periodic recalibration of the DPI822 is recommended. Refer to your organization's calibration schedule or contact a certified calibration service.

7. Поиск Неисправностей

7.1 Устройство не включается

• Проверьте установку батареи и убедитесь, что батареи новые.
• Убедитесь в правильности полярности батареи.

7.2 Неточные показания

• Убедитесь, что измерительные провода надежно подключены и не повреждены.
• Убедитесь, что выбраны правильная функция измерения и диапазон.
• Check for proper cold junction compensation if measuring thermocouples.
• Consider if recalibration is due.

7.3 Проблемы с отображением

• If the display is dim, replace batteries.
• If the display is blank or frozen, try restarting the device.

Если у вас возникли проблемы, не описанные здесь, или если предложенные шаги по устранению неполадок не помогли, обратитесь в службу поддержки клиентов.

8. Технические характеристики

Примечание. Технические характеристики могут быть изменены без предварительного уведомления.

9. Информация о гарантии

The Druck DPI822 Thermocouple/Loop Calibrator is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Druck webПодробные условия гарантии, срок ее действия и порядок подачи претензий можно найти на сайте. Сохраните чек о покупке для подтверждения гарантии.

10. Поддержка клиентов

For technical assistance, service, or inquiries regarding your Druck DPI822, please contact Druck customer support. Contact information can typically be found on the manufacturer's official website or on the product packaging. When contacting support, please have your product model number (DPI822) and serial number (if applicable) ready.