Руководство пользователя для алюминиевой двойной задней выхлопной системы Gibson Performance Exhaust 18808.

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Gibson Performance Exhaust 18808 Aluminized Dual Rear Exhaust System. This system is designed to replace the factory exhaust, offering a bolt-on solution without requiring welding.

The Gibson 18808 system features aluminized, 2.5-inch mandrel-bent heavy-duty tubing, a Superflow performance muffler, and 3.5-inch polished T304 stainless steel round slash-cut tips. The exhaust exit is straight out the back of the vehicle.

Изображение 1.1: оконченоview of the Gibson Performance Exhaust 18808 system components, including muffler, piping, and dual tips.

2. Информация по технике безопасности

Always prioritize safety during installation and operation. Wear appropriate personal protective equipment, such as safety glasses and gloves. Ensure the vehicle is securely supported on jack stands or a lift before working underneath it. Allow the exhaust system to cool completely before handling to prevent burns.

КАЛИФОРНИЯ ПРЕДУПРЕЖДЕНИЕ: Этот продукт может подвергнуть вас воздействию химикатов, включая свинец, который, как известно в штате Калифорния, вызывает рак и врожденные дефекты или другие нарушения репродуктивной функции. Для получения дополнительной информации перейдите на www.P65Warnings.ca.gov.

3. Настройка и установка

The Gibson 18808 exhaust system is designed for hassle-free bolt-on installation. No welding is required. It includes zinc-plated factory-style hangers, clamps, and all necessary hardware.

3.1. Необходимые инструменты

• Набор торцевых ключей/гаечных ключей
• Прай Бар
• Проникающая смазка
• Защитные очки
• Перчатки
• Автомобильный подъемник или подставки под домкрат

3.2. Этапы установки

1. Подготовьте автомобиль: Park the vehicle on a level surface. Engage the parking brake. Allow the exhaust system to cool completely. Lift the vehicle using a hoist or securely place it on jack stands.
2. Remove Factory Exhaust:
   • Найдите и ослабьте все заклепки.amps and bolts securing the factory exhaust system.
   • Use penetrating lubricant on rusted fasteners if necessary.
   • Carefully remove the factory exhaust system from the hangers. It may be necessary to cut the exhaust in sections for easier removal, depending on the vehicle model.
3. Install New System Components:
   • Refer to the diagram (Image 3.1) for component placement.
   • Begin by installing the head pipe, connecting it to the catalytic converter. Do not fully tighten bolts yet.
   • Attach the muffler assembly to the head pipe.
   • Install the two tailpipes and then the two exit pipes, ensuring they align correctly with the vehicle's undercarriage and hangers.
   • Attach the 3.5-inch polished T304 stainless steel round slash-cut tips to the exit pipes.
   • Ensure all components are properly seated in the factory-style hangers.
4. Выровняйте и затяните:
   • Once all components are loosely installed, adjust the system for optimal alignment and clearance from the vehicle's frame, suspension, and body.
   • Ensure the exhaust tips are positioned as desired, exiting straight out the back.
   • Начиная с передней части автомобиля, постепенно затягивайте все болты.ampс и болты.
5. Окончательная проверка: Lower the vehicle. Start the engine and check for any exhaust leaks. Listen for any rattles or vibrations. Adjust as necessary.

Image 3.1: Schematic diagram illustrating the general layout of the exhaust system components from the catalytic converter to the dual tips.

Image 3.2: The Gibson 18808 exhaust system installed on a vehicle, showcasing the dual rear exit and polished tips.

4. Operation and Performance Characteristics

The Gibson 18808 system is designed to deliver a powerful "big block" sound. Users can expect a noticeable change in exhaust tone compared to the factory system. The Superflow performance muffler is engineered to decrease backpressure, which can result in increased torque and horsepower.

Performance characteristics may vary based on vehicle make, model, engine type, and other modifications.

5. Техническое обслуживание

The Gibson Performance Exhaust system is constructed from durable aluminized steel and T304 stainless steel tips, designed for longevity. Regular maintenance is minimal but recommended:

• Периодическая проверка: Annually inspect all clamps, hangers, and connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.
• Уборка: The polished stainless steel tips can be cleaned with a non-abrasive metal polish to maintain their luster.
• Проверка на коррозию: While aluminized steel offers good corrosion resistance, inspect the system periodically for any signs of rust, especially in areas exposed to road salt or harsh weather conditions.

6. Поиск Неисправностей

Если после установки у вас возникли проблемы, обратите внимание на следующее:

• Дребезжание или вибрация:
  • Ensure all hangers are properly seated and not touching the vehicle's frame or body.
  • Check for adequate clearance between the exhaust pipes and other vehicle components. Adjust alignment if necessary.
  • Проверьте все кл.ampБолты надежно затянуты.
• Выхлопные утечки:
  • Inspect all connection points for leaks. A common method is to feel for escaping air or listen for a hissing sound.
  • Убедитесь, что clamps are tight and properly positioned over pipe joints.
• Проблемы с совместимостью:
  • Some aftermarket components (e.g., tow hitches) may interfere with exhaust routing. Verify compatibility before installation.
  • If pipes appear ovalized or difficult to fit, minor reshaping may be required.

If problems persist, consult a professional automotive technician or contact Gibson Performance Exhaust customer support.

7. Технические характеристики

8. Информация о гарантии

The Gibson Performance Exhaust 18808 Aluminized Dual Rear Exhaust System is backed by a Пожизненная ограниченная гарантия. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official Gibson Performance Exhaust warranty documentation or contact their customer support.

9 Поддержка

For further assistance, technical support, or warranty inquiries regarding your Gibson Performance Exhaust system, please contact Gibson Performance Exhaust directly. Contact information can typically be found on their official webсайта или упаковки продукта.

Manufacturer: Gibson Performance Exhaust