Axxess GMOS-05

Руководство пользователя интерфейса OnStar Axxess GMOS-05

Model: GMOS-05 | Brand: Axxess

1. Введение

The Axxess GMOS-05 OnStar Interface is designed to facilitate the replacement of an Original Equipment Manufacturer (OEM) radio with an aftermarket receiver in specific non-amplified GM vehicles. This interface is compatible with vehicles equipped with the "Door-n-Lock" style harness. It ensures the retention of key factory features, including OnStar functionality and safety/warning chimes, while also providing necessary outputs for navigation radio installations.

2. Информация по технике безопасности

Please read all instructions carefully before installation. Improper installation may result in damage to the vehicle's electrical system, the interface module, or the aftermarket radio.

3. Содержимое упаковки

Verify that all items are present before proceeding with the installation.

Axxess GMOS-05 Interface Module and Wiring Harnesses
Рисунок 3.1: Axxess GMOS-05 Interface Module and Wiring Harnesses. This image displays the main GMOS-05 interface module, a black rectangular box, along with two distinct wiring harnesses. One harness features a large white multi-pin connector, while the other has a smaller black connector, both designed for vehicle integration.

4. Настройка и установка

This section provides general instructions for installing the GMOS-05 interface. Specific vehicle disassembly and reassembly procedures are not covered and should be referenced from a vehicle-specific service manual or professional guide.

4.1. Проводные соединения

Match the wires from the GMOS-05 harness to the corresponding wires on your aftermarket radio's harness. Refer to the color codes below.

Close-up of Main Wiring Harness Connector
Рисунок 4.1: Close-up of Main Wiring Harness Connector. This image shows a detailed view of the primary wiring harness, highlighting the multi-colored wires and the large white connector that interfaces with the vehicle's factory wiring. A smaller red connector is also visible, typically for specific signal wires.
GMOS-05 Wiring Color Code
Цвет проводаФункцияПодключиться к
Желтый12V Constant PowerAftermarket Radio Yellow Wire
КрасныйПитание аксессуаров 12 ВAftermarket Radio Red Wire
ЧерныйЗемляAftermarket Radio Black Wire
АпельсинОсвещениеAftermarket Radio Orange Wire (if applicable)
Синий/БелыйAmpвключениеПослепродажное радио Amp Turn-On Wire (if applicable)
ЗеленыйЛевый передний динамик (+)Aftermarket Radio Left Front Speaker (+)
Зеленый/ЧерныйЛевый передний динамик (-)Aftermarket Radio Left Front Speaker (-)
БелыйПравый передний динамик (+)Aftermarket Radio Right Front Speaker (+)
Белый/ЧерныйПравый передний динамик (-)Aftermarket Radio Right Front Speaker (-)
СерыйЛевый задний динамик (+)Aftermarket Radio Left Rear Speaker (+)
Серый/ЧерныйЛевый задний динамик (-)Aftermarket Radio Left Rear Speaker (-)
ФиолетовыйПравый задний динамик (+)Aftermarket Radio Right Rear Speaker (+)
Фиолетовый / ЧерныйПравый задний динамик (-)Aftermarket Radio Right Rear Speaker (-)
Светло-зеленыйВыход стояночного тормозаAftermarket Radio Parking Brake Input (for navigation)
СинийVehicle Speed Sense (VSS) OutputAftermarket Radio VSS Input (for navigation)
КоричневыйОбратный выходAftermarket Radio Reverse Input (for navigation/camera)

Примечание: This wiring diagram is a general guide. Always refer to the specific wiring instructions provided with your aftermarket radio and vehicle for precise connections.

4.2. Этапы установки

  1. Подготовьте автомобиль: Disconnect the negative battery terminal. Remove the factory radio from the dashboard.
  2. Проводные соединения: Connect the wires from the GMOS-05 harness to the aftermarket radio harness according to the wiring color code (Section 4.1). Solder and heat-shrink all connections for reliability.
  3. Connect GMOS-05 Module: Plug the prepared GMOS-05 harness into the GMOS-05 interface module.
  4. Подключение транспортного средства: Connect the vehicle-specific connectors from the GMOS-05 harness into the factory wiring harnesses in the vehicle's radio opening.
  5. Результаты навигации: If installing a navigation radio, connect the Light Green (Parking Brake), Blue (VSS), and Brown (Reverse) wires from the GMOS-05 harness to the corresponding inputs on your navigation radio.
  6. Тестовая система: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio, OnStar, and safety chimes.
  7. Настройте параметры: Adjust OnStar volume and chime levels as described in Section 5.1.
  8. Окончательная сборка: Once all functions are verified, securely mount the aftermarket radio and reassemble the dashboard.

5. Operating Features and Adjustments

The GMOS-05 interface retains several factory features and allows for adjustments to optimize your audio experience.

5.1. OnStar and Chime Volume Adjustment

The GMOS-05 allows for independent adjustment of OnStar volume and safety/warning chime levels. This is typically done via potentiometers (small adjustment screws) located on the GMOS-05 module itself.

Perform these adjustments with the vehicle running and the aftermarket radio powered on to accurately gauge the sound levels.

5.2. Navigation Radio Outputs

The GMOS-05 provides dedicated outputs for aftermarket navigation radios, which require specific vehicle data for proper operation.

6. Техническое обслуживание

The Axxess GMOS-05 interface module is designed for maintenance-free operation once properly installed.

7. Поиск Неисправностей

Распространенные проблемы и решения
ПроблемаВозможная причинаРешение
Нет звука от магнитолы стороннего производителя.Incorrect speaker wiring; no power to radio; interface not initialized.Verify all speaker wires are correctly connected. Check 12V constant and accessory power. Ensure the interface is properly connected to the vehicle's data bus.
OnStar or safety chimes are not working or are too loud/quiet.Incorrect connection to GMOS-05; volume potentiometers need adjustment.Confirm the GMOS-05 module is properly connected. Adjust the "OnStar Vol" and "Chime Vol" potentiometers on the module (refer to Section 5.1).
Aftermarket radio does not power on.No 12V constant or accessory power; blown fuse.Check the vehicle's fuse box for blown fuses. Verify the Yellow (constant) and Red (accessory) wires are correctly connected and receiving power.
Navigation features (e.g., parking brake, VSS, reverse) are not functioning.Outputs from GMOS-05 not connected to navigation radio.Ensure the Light Green, Blue, and Brown wires from the GMOS-05 are correctly connected to the corresponding inputs on your navigation radio (refer to Section 4.1).

If troubleshooting steps do not resolve the issue, contact Axxess technical support or a certified installer.

8. Технические характеристики

9. Гарантия и поддержка

The Axxess GMOS-05 interface is manufactured by Metra Electronics. For warranty claims or technical support, please contact the retailer from whom the product was purchased. The retailer will then coordinate with Metra Electronics for warranty services. It is recommended to retain your proof of purchase for warranty purposes.

For additional technical assistance or detailed product information, please visit the official Axxess or Metra Electronics webсайт.

Связанные документы - ГМОС-05

Предварительноview Инструкция по установке AXXESS GMOS-044 для Chevrolet Cruze
Подробные инструкции по установке интерфейса AXXESS GMOS-044, позволяющего сохранить заводские функции, такие как OnStar, звуковой сигнал и кнопки управления на руле в моделях Chevrolet Cruze 2011-2016 с монохромными экранами.
Предварительноview Руководство по установке интерфейса данных GM Axxess GMOS-13 для Cadillac STS 2005-2011 годов
Руководство по установке интерфейса данных GM Axxess GMOS-13, позволяющего интегрировать аудиосистему автомобиля в автомобили Cadillac STS 2005-2011 годов выпуска, сохраняя при этом заводские функции, такие как OnStar, Bluetooth и ampоживлённые звуковые системы.
Предварительноview Axxess GMOS-LAN-012 Installation Instructions
Detailed installation guide for the Axxess GMOS-LAN-012 interface, providing features like accessory power, retained accessory power, and compatibility with various GM vehicles. Includes wiring instructions, programming steps, and troubleshooting tips.
Предварительноview Руководство по установке интерфейса передачи данных Axxess AX-GMLAN29 GM 2006-2017
Installation instructions for the Axxess AX-GMLAN29 GM Data Interface, designed for 2006-2017 GM vehicles. This guide details interface features, components, vehicle applications, required tools, wiring connections, installation steps, and initialization procedures.
Предварительноview Axxess CHTO-013 Installation Instructions for Chrysler Vehicles
Detailed installation guide for the Axxess CHTO-013 interface module, designed for Chrysler, Dodge, Jeep, Mitsubishi, and Volkswagen vehicles from 2004 onwards. Includes wiring instructions, kit features, and testing procedures.
Предварительноview AXXESS AXTO-TY2 Toyota AmpИнструкции по установке интерфейса lifier
Подробное руководство по установке AXXESS AXTO-TY2 ampИнтерфейс Lifier, разработанный для автомобилей Toyota 2012 года выпуска и новее. Охватывает функции, компоненты, приложения, подключение проводов и этапы программирования.