1. Введение
The Hanna Instruments HI 711 Checker HC is a handheld colorimeter designed for accurate and precise measurement of total chlorine levels. This device offers a simpler and more cost-effective alternative to chemical test kits while providing greater accuracy. It utilizes the EPA-approved DPD method 4500-Cl G, making it suitable for applications requiring this standard. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your HI 711 Checker HC.
2. Информация по технике безопасности
Please read all instructions carefully before using the HI 711 Checker HC. Failure to do so may result in inaccurate readings or damage to the device. Always handle reagents with care and follow all safety precautions provided with the reagent kits. Keep the device and reagents out of reach of children.
3. Продукт закончилсяview
The HI 711 Checker HC is a compact, single-button operation device featuring a large LCD screen for easy readability. It is designed for portability and ease of use in various environments.
Изображение 1: The Hanna Instruments HI 711 Checker HC Handheld Colorimeter shown with a sample vial. The device displays a reading of 0.87 ppm for Total Chlorine.
Ключевые компоненты включают в себя:
- ЖК-дисплей: Shows measurement readings and operational prompts.
- Кнопка управления: Used for powering on/off and initiating measurements.
- Cuvette Holder: Compartment for inserting sampле флаконы.
- Отсек для батареи: Расположен сзади для установки батареек типа AAA.
4. Настройка
4.1 Установка аккумулятора
- Найдите батарейный отсек на задней панели устройства.
- Снимите крышку аккумуляторного отсека.
- Вставьте одну (1) батарейку AAA, соблюдая правильную полярность (+/-).
- Надежно закройте крышку батарейного отсека.
4.2 Начальная подготовка
Before first use, ensure the cuvettes are clean and free from scratches or debris. Use distilled or deionized water for rinsing.
5. Инструкция по эксплуатации
The HI 711 Checker HC operates using a simple, single-button interface. Follow these steps for accurate total chlorine measurements:
- Включение питания: Press the button to turn the Checker HC on. The display will show "---" then "Add C1".
- Обнулите устройство:
- Fill a clean cuvette with 10 mL of unreacted sample water (the water you wish to test, before adding reagent).
- Cap the cuvette and wipe it thoroughly with a lint-free cloth to remove any fingerprints or smudges.
- Insert the cuvette into the Checker HC, ensuring the cap is fully seated.
- Press the button. The display will show "Add C2" when zeroing is complete.
- Добавить реагент:
- Remove the cuvette from the Checker HC.
- Add one packet of HI 711-0 Total Chlorine reagent to the sampле в кювете.
- Cap the cuvette and shake gently for approximately 20 seconds to dissolve the reagent.
- Wipe the cuvette thoroughly with a lint-free cloth.
- Мера:
- Insert the cuvette back into the Checker HC.
- Press the button. The display will show a countdown timer (e.g., "2:00"). This is the reaction time required for the DPD method.
- After the countdown, the Checker HC will display the total chlorine concentration in ppm (parts per million).
- Выключение: The device features an auto shut-off function to conserve battery life. It will automatically turn off after 10 minutes of inactivity. To manually turn off, press and hold the button until "OFF" is displayed.
Изображение 2: The Hanna Instruments HI 711 Checker HC showing a measurement of 0.82 ppm for Total Chlorine on its LCD screen.
6. Техническое обслуживание
6.1 Очистка
- Always keep the cuvettes clean. Rinse them thoroughly with distilled or deionized water after each use.
- Wipe the exterior of the Checker HC with a soft, damp Ткань. Не используйте абразивные чистящие средства или растворители.
- Ensure the cuvette holder is clean and dry before storage.
6.2 Хранение
- Store the Checker HC in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for extended periods, remove the AAA battery to prevent leakage.
- Store reagents in their original packaging in a cool, dark place.
7. Поиск Неисправностей
This section addresses common issues you might encounter with your HI 711 Checker HC.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Неточные или непоследовательные показания | Dirty cuvette, expired reagent, improper zeroing, air bubbles in sample | Clean cuvette thoroughly, use fresh reagent, ensure proper zeroing with unreacted sample, remove air bubbles by gently tapping the cuvette. |
| Устройство не включается | Dead battery, incorrect battery installation | Replace AAA battery, check battery polarity. |
| На дисплее отображается сообщение "Ошибка". | Measurement outside range, light interference | Убедитесь, чтоample is within the device's measurement range. Perform measurement in a stable light environment. Re-zero the device. |
8. Технические характеристики
The following are the technical specifications for the Hanna Instruments HI 711 Checker HC:
- Модель: HI-711
- Параметр: Общий хлор
- Метод: Adaptation of the EPA DPD method 4500-Cl G
- Источник питания: 1 батарейки типа ААА
- Размеры продукта: 5 x 3 x 4 дюйма
- Масса: 8.82 унции
- Автоматическое отключение: После 10 минут бездействия
9. Информация о гарантии
Hanna Instruments products are warranted against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The specific warranty period may vary by region and product. Please refer to the warranty card included with your product or visit the official Hanna Instruments webПодробные условия гарантии можно найти на сайте. Сохраните чек о покупке для предъявления претензий по гарантии.
10. Поддержка клиентов
For technical assistance, troubleshooting, or information regarding reagents and accessories, please contact Hanna Instruments customer support. You can find contact details on the official Hanna Instruments website or through your local distributor. When contacting support, please have your product model number (HI-711) and purchase date available.