1. Введение
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. Инструкции по технике безопасности
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- Всегда подключайте устройство к заземленной розетке.
- Ensure the power adapter's voltagе соответствует местному источнику питания.
- Не подвергайте устройство воздействию дождя, сырости или чрезмерной влажности.
- Не размещайте устройство вблизи источников тепла или под прямыми солнечными лучами.
- Не используйте устройство, если шнур питания поврежден.
- Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
- Перед чисткой или выполнением любого технического обслуживания отключите питание.
3. Содержимое упаковки
Verify that all items listed below are present and in good condition upon opening the package:
- Elation Professional SDC-6 v2 DMX Controller
- Адаптер питания 9 В
- Руководство пользователя (этот документ)
4. Настройка
Follow these steps to set up your SDC-6 v2 DMX controller:
- Размещение: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- DMX-соединение: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- Подключение питания: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
Рисунок 4.1: Вверху view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
Рисунок 4.2: Сторона view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. Инструкция по эксплуатации
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. Индикатор питания
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. Техническое обслуживание
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- Уборка: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Хранилище: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- Власть: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. Поиск Неисправностей
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет индикатора питания | Адаптер питания не подключен или неисправен; розетка неактивна. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| Прерывистое управление | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. Технические характеристики
| Модель | СДК6 |
| Бренд | Elation Professional (ADJ) |
| Каналы | 6 DMX Channels + 1 Master Fader |
| DMX-разъем | 3-pin XLR DMX Output |
| Источник питания | 9 В постоянного тока (через прилагаемый адаптер питания) |
| Размеры (Д x Ш x В) | 173 мм x 153 мм x 55 мм (6.81 дюйма x 6.02 дюйма x 2.17 дюйма) |
| Масса | 1 кг (2.2 фунта) |
| Цвет | Черный |
| Страна происхождения | Китай |
9. Гарантия и поддержка
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webСохраните чек о покупке для предъявления гарантийных претензий.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
