1. Продукт закончилсяview
The Briggs & Stratton 796496 screw is a genuine replacement component designed to maintain the optimal performance and integrity of your outdoor power equipment. This part is manufactured to exact OEM standards, ensuring a precise fit and reliable function within compatible Briggs & Stratton engines.
Using genuine Briggs & Stratton parts helps ensure that your engine operates as intended and complies with applicable emission regulations.
Image 1: The Briggs & Stratton 796496 screw, a genuine replacement part.
2. Совместимость
This Briggs & Stratton 796496 screw is specifically designed to fit most Briggs & Stratton engine models in the 112000, 111000, 11P000, and 114000 series. It is crucial to verify your engine's model number before purchasing and installing any replacement part to ensure proper fitment and function.
Image 2: Important reminder to check your engine's model number for compatibility.
Refer to your equipment's original owner's manual or the engine's identification label for accurate model information.
3. Установка/Замена
This section outlines the general procedure for replacing a screw in a Briggs & Stratton engine. Specific steps may vary depending on the exact location and function of the screw within your engine model. Always consult your engine's service manual for detailed, model-specific instructions.
Необходимые инструменты:
- Appropriate screwdriver or wrench for the screw head type.
- Динамометрический ключ (рекомендуется для точной затяжки).
- Защитные очки и перчатки.
Процедура:
- Безопасность прежде всего: Ensure the engine is turned off, cooled down, and the spark plug wire is disconnected to prevent accidental starting.
- Locate the Screw: Identify the screw that needs replacement. This screw is often used in muffler assemblies or other engine components.
- Remove Old Screw: Carefully loosen and remove the existing screw using the appropriate tool. If the screw is seized or damaged, use penetrating oil or a screw extractor as needed.
- Зона осмотра: Clean any debris or corrosion from the screw hole and surrounding area. Inspect the threads for damage.
- Install New Screw: Insert the new Briggs & Stratton 796496 screw into the designated hole. Hand-tighten first to ensure it threads correctly.
- Tighten to Specifications: Using a torque wrench, tighten the screw to the manufacturer's specified torque settings. Over-tightening can strip threads, while under-tightening can lead to loosening during operation.
- Повторное подключение и тестирование: Reconnect the spark plug wire. Start the engine and check for proper operation and secure fitment of the component where the screw was installed.
Примечание: For muffler bolts, applying a thin coat of high-temperature anti-seize compound to the threads can prevent future seizing, especially when steel bolts are used in aluminum manifolds.
4. Вопросы технического обслуживания
While a screw itself requires minimal maintenance, its proper function is critical to the overall performance and safety of your engine. Consider the following:
- Периодическая проверка: During routine engine maintenance, visually inspect all screws and fasteners for signs of loosening, corrosion, or damage.
- Проверка герметичности: If a screw appears loose, gently tighten it to the recommended torque specification. Avoid over-tightening.
- Предотвращение коррозии: In environments prone to moisture or chemicals, consider applying a suitable anti-corrosion coating or grease to exposed screw heads.
- Оригинальные запчасти: Always use genuine Briggs & Stratton replacement screws to ensure material quality, thread integrity, and proper fit.
5. Технические характеристики
| Атрибут | Деталь |
|---|---|
| Номер детали | 796496 |
| Производитель | Бриггс и Страттон |
| Совместимость | Most Briggs & Stratton 112000, 111000, 11P000, 114000 series engines |
| Материал | (Specific material not provided, assumed to be standard fastener grade) |
| Масса | Примерно 0.634 унций (18 грамм) |
6. Поиск Неисправностей
If you encounter issues after replacing the screw, consider the following:
- Отдельный компонент: If the component secured by the screw is loose, re-check the screw's tightness. Ensure it is torqued to specifications.
- Оборванные нити: If the screw does not tighten properly, the threads in the engine block or component may be stripped. This requires professional repair, such as re-tapping or using a thread repair kit (e.g., Helicoil).
- Неверная деталь: Double-check that the 796496 screw is indeed the correct part for your specific engine model and application.
- Вибрация/Шум: Excessive vibration or unusual noise after replacement might indicate improper installation or a loose component. Re-inspect all connections.
7. Гарантия и поддержка
For information regarding the warranty of genuine Briggs & Stratton replacement parts, please refer to the official Briggs & Stratton webсайт или свяжитесь со службой поддержки клиентов напрямую. Сохраните чек о покупке в качестве доказательства покупки.
For further assistance or technical support, visit the official Магазин Briggs & Stratton на Amazon или их основной корпоративный webсайт.
