1. Введение
This instruction manual provides essential information for the proper installation and maintenance of your Leviton 84026 2-Gang Standard Size Magnetic Stainless Steel Wallplate. Please read these instructions thoroughly before beginning installation to ensure safe and correct usage.
The Leviton 84026 wallplate is designed for 2-gang flush mount applications, featuring a 2.15-inch diameter device receptacle opening. It is constructed from magnetic stainless steel, offering durability and a smooth finish.
2. Информация по технике безопасности
WARNING: Risk of Electric Shock. Turn off power at the circuit breaker or fuse box before installation.
- Always ensure power is disconnected before handling electrical components.
- Если у вас возникли сомнения по какому-либо этапу процесса установки, обратитесь к квалифицированному электрику.
- Данный продукт предназначен только для использования внутри помещений.
- Не устанавливайте во влажном или damp локации.
- Убедитесь, что все соединения надежны и соответствуют местным электротехническим правилам и нормам.
3. Содержимое упаковки
Перед началом установки убедитесь, что все компоненты присутствуют:
- 1 x Leviton 84026 2-Gang Standard Size Magnetic Stainless Steel Wallplate
- Металлические крепежные винты, подобранные по цвету
4. Инструкция по установке
- Выключите питание: Locate the circuit breaker or fuse that controls the power to the outlet or switch where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltagе тестер.
- Снимите старую настенную панель (если она есть): Carefully unscrew and remove the existing wallplate.
- Prepare New Wallplate: The Leviton 84026 wallplate ships with a protective film (blue or clear) to prevent scratches during shipping and handling. This film must be removed prior to installation for optimal appearance.
Image: A Leviton 2-Gang Stainless Steel Wallplate with a corner of the blue protective film being peeled off, revealing the brushed stainless steel underneath. This demonstrates the protective film removal process.
Изображение: крупный план view of a finger carefully peeling the blue protective film from the edge of a stainless steel wallplate, highlighting the smooth finish beneath.
- Position Wallplate: Align the new Leviton 84026 wallplate over the electrical device(s) and the wall box. Ensure the openings on the wallplate match the device configuration.
- Надежная настенная панель: Use the provided color-matched metal mounting screws to attach the wallplate to the electrical device(s) and/or wall box. Do not overtighten the screws, as this can damage the wallplate or the device.
- Восстановить мощность: Once the wallplate is securely installed, restore power at the circuit breaker or fuse box.
5. Техническое обслуживание
To maintain the appearance and functionality of your Leviton stainless steel wallplate:
- Уборка: Протрите настенную панель мягкой тряпкой.amp cloth. For stubborn marks, a mild, non-abrasive cleaner suitable for stainless steel can be used. Avoid harsh chemicals, abrasive pads, or scouring powders, as these can scratch the finish.
- Инспекция: Periodically check the wallplate for any signs of damage or loose screws. Tighten screws as needed, but do not overtighten.
6. Поиск Неисправностей
- Wallplate does not fit over device:
- Ensure you have the correct wallplate configuration (e.g., 2-gang, 2.15-inch diameter receptacle opening) for your electrical device. Verify the device is properly seated in the wall box.
- Scratches or dull appearance:
- Confirm that the protective film has been completely removed from the wallplate. If the film was removed, scratches may indicate improper handling or cleaning with abrasive materials. Stainless steel can be polished with appropriate stainless steel cleaners if needed.
- Винты не затягиваются:
- Ensure you are using the provided screws and that the screw holes on the electrical device are not stripped. If stripped, the device itself may need replacement.
7. Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | 84026 |
| Материал | Магнитная нержавеющая сталь |
| Конфигурация | 2-Gang, 2.15-inch Diameter Device Receptacle |
| Размер | Стандарт |
| Размеры изделия (Ш x В) | 0.07" x 0.14" (Note: These dimensions appear to be for thickness/depth, not width/height of the plate itself. Refer to product packaging for full plate dimensions.) |
| Вес товара | 2.81 унции |
| Тип установки | Ввинчивающийся |
| Тип отделки | Гладкий |
| Сертификаты | Сертифицировано UL и CSA. |
8. Гарантия и поддержка
Информация о гарантии
This Leviton product is covered by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the documentation included with your purchase or visit the official Leviton webсайт.
Поддержка клиентов
For technical assistance, installation questions, or to report any issues with your Leviton product, please contact Leviton Customer Support:
- Webсайт: www.leviton.com
- Обратитесь к Левитону website for contact phone numbers and email support options specific to your region.
