Продукт болееview
This manual provides essential information for the safe and effective use of the OSRAM Sylvania 54507 HP600 Projector Light Bulb. This bulb is a 575-watt, 115-volt halogen lamp featuring a G9.5 Medium Bipin base and a T6 shape. It has a rated life of 300 hours, a color temperature of 3250K, and a C-13D filament with a clear finish.
Image: The OSRAM Sylvania 54507 HP600 Projector Light Bulb, showcasing its T6 shape and G9.5 base.
Инструкции по установке
Proper installation is crucial for the performance and longevity of your projector bulb. Always ensure the projector is powered off and unplugged before beginning installation.
- Безопасность прежде всего: Turn off the projector and unplug it from the power source. Allow the projector and the old bulb to cool down completely before handling. Hot bulbs can cause severe burns.
- Locate Bulb Compartment: Refer to your projector's specific user manual to locate and open the lamp compartment. This usually involves removing a cover secured by screws.
- Удалить старую лампочку: Carefully disconnect any wiring and unfasten the old bulb assembly. Handle the old bulb with care, as it may be fragile.
- Установите новую лампочку: Gently insert the new OSRAM Sylvania 54507 HP600 bulb into the projector's lamp жилье. Avoid touching the glass portion of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use a clean cloth or gloves if necessary. Ensure the G9.5 bipin base pins align correctly with the socket.
- Secure Bulb and Compartment: Fasten the bulb assembly securely and close the lamp compartment cover. Ensure all screws are tightened to prevent dust ingress and ensure proper cooling.
- Включение питания: Plug the projector back into the power source and turn it on. The new bulb should illuminate.
Image: Diagram illustrating the dimensions of the G9.5 bipin base, showing pin spacing and overall base measurements for compatibility reference.
Инструкция по эксплуатации
Once installed, the OSRAM Sylvania 54507 HP600 bulb operates as part of your projector system. Follow these general guidelines for optimal performance:
- Цикл питания: Turn on the projector using its power button. Allow the bulb to warm up to full brightness, which may take a few moments.
- Период охлаждения: After use, turn off the projector and allow it to complete its internal cool-down cycle before unplugging or moving it. This protects the bulb from thermal shock and extends its lifespan.
- Избегайте частого включения/выключения: Minimize turning the projector on and off rapidly, as this can reduce the bulb's rated life.
Обслуживание
Regular maintenance of your projector system helps ensure the longevity and performance of the OSRAM Sylvania 54507 HP600 bulb.
- Projector Filter Cleaning: Periodically clean or replace your projector's air filters as recommended by the projector manufacturer. Clogged filters can lead to overheating, which significantly shortens bulb life.
- Замена лампы: The OSRAM Sylvania 54507 HP600 has a rated life of 300 hours. Monitor your projector's lamp hour counter and replace the bulb when it approaches its end-of-life or when brightness noticeably diminishes.
- Хранилище: If storing a spare bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
Поиск неисправностей
If you encounter issues with your projector bulb, consider the following common problems and solutions:
- Лампочка не горит:
- Проверьте мощность: Ensure the projector is properly plugged in and receiving power.
- Переустановка: Power off and unplug the projector. Re-open the lamp compartment and ensure the bulb is seated correctly and all connections are secure.
- Конец жизни: If the bulb has reached or exceeded its rated life (300 hours), it may have failed. Replace with a new bulb.
- Projector Error: Consult your projector's manual for specific error codes related to lamp отказ.
- Тусклый или мерцающий свет:
- Bulb Nearing End of Life: Dimness or flickering often indicates the bulb is nearing the end of its operational lifespan.
- Перегрев: Ensure projector vents are clear and filters are clean to prevent overheating.
Если эти действия не помогут решить проблему, обратитесь в службу поддержки клиентов или к квалифицированному специалисту.
Технические характеристики продукта
Key technical specifications for the OSRAM Sylvania 54507 HP600 Projector Light Bulb:
| Спецификация | Деталь |
|---|---|
| Бренд | Компания OSRAM |
| Номер модели | 54507 (HP600) |
| Тип света | Галоген |
| Ватtage | 575 Вт |
| Томtage | 115 Вольт |
| Основание лампочки | G9.5 Medium Bipin |
| Размер формы луковицы | T6 |
| Номинальная мощность | 300 часов |
| Цветовая температура | 3250 Кельвинов |
| Тип нити | С-13Д |
| Заканчивать | Прозрачный |
| Материал | Медь |
| Вес товара | 0.81 унции |
Информация о гарантии
Specific warranty terms for the OSRAM Sylvania 54507 HP600 Projector Light Bulb are typically provided by the manufacturer, OSRAM, or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your purchase or visit the official OSRAM webсайт.
Поддержка клиентов
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact OSRAM customer support or the retailer from whom you purchased the bulb.
- OSRAM Store: Более подробную информацию и контактные данные вы можете найти на официальном сайте Магазин OSRAM на Amazon.
- Поддержка продавцов: Contact the seller directly for purchase-specific support.
