DigiTech BP80 Bass Multi-Effects Processor

Введение

The DigiTech BP80 is a versatile Bass Modeling multi-effects processor designed for bassists seeking a wide range of tones and effects. Powered by DigiTech’s AudioDNA™ DSP processor, it offers 16 bass amp and stompbox models, along with numerous other effects to craft your unique sound. Its integrated expression pedal allows for real-time control over various parameters, enhancing performance flexibility.

The BP80 features an intuitive interface for easy effect editing. It also includes a built-in Drum Machine for timing practice and a precise 13-LED chromatic tuner. The unit comes pre-loaded with 40 factory presets and provides 40 user preset locations for custom configurations.

Рисунок 1: Передняя часть view of the DigiTech BP80 Bass Multi-Effects Processor, showing the control panel, display, footswitches, and expression pedal.

Настраивать

Before operating your BP80, ensure all connections are made correctly and securely. Use only the provided power supply to prevent damage.

1. Подключение питания: Connect the included 9V DC power supply to the "9VDC 300mA" input jack on the rear panel of the BP80. Plug the power supply into a standard AC outlet.
2. Вход инструмента: Connect your bass guitar to the "INPUT" 1/4" jack on the rear panel using a standard instrument cable.
3. Вывод на Amplifier/Mixer: Connect the "LEFT OUT" and/or "RIGHT OUT" 1/4" jacks to your bass amplifier, mixer, or audio interface. For mono operation, use the "LEFT OUT" jack.
4. Выход для наушников: For silent practice, connect a pair of stereo headphones to the "1/8" stereo headphone output" jack.

Figure 2: Rear panel of the DigiTech BP80, showing the Input, Left Out, Right Out, Headphone, and Power Supply jacks.

Once all connections are made, the BP80 is ready to be powered on. The unit will display the current preset number.

Инструкция по эксплуатации

The BP80 offers a range of features accessible via its control panel and footswitches.

Контролируетview

• Ножные переключатели: Used for navigating presets (up/down) and engaging/bypassing effects.
• Педаль экспрессии: Controls real-time parameters such as Wah, Volume, or Whammy effects, depending on the preset.
• EDIT/EFFECT Buttons: Used to select effect categories for editing.
• VALUE/MASTER VOLUME Buttons: Adjust parameter values or the overall output volume.
• Кнопка МАГАЗИН: Saves edited presets to user locations.
• DRUMS Button: Activates and controls the built-in drum machine.

Предустановленная навигация

The BP80 comes with 40 factory presets (01-40) and 40 user presets (41-80). Use the footswitches to scroll through presets. Press the left footswitch to decrease the preset number and the right footswitch to increase it.

Effect Editing

To edit an effect within a preset:

1. Нажмите EDIT/EFFECT buttons to cycle through the available effect categories (e.g., Chorus/Mod, Noise Gate, EQ, Delay, Reverb, Compressor, Fretless/Wah, Amp Model, Stompbox Model). The selected category will be indicated on the display.
2. Once an effect category is selected, use the VALUE/MASTER VOLUME buttons to adjust the parameters within that effect. The display will show the parameter value.
3. The BP80 features 16 bass amp and stompbox models, and 19 studio-quality effects. Experiment with different settings to achieve your desired tone.

Сохранение предустановок

After editing a preset, you can save your changes to one of the 40 user preset locations (41-80):

1. Нажмите МАГАЗИН button. The display will flash, indicating it's ready to save.
2. Use the footswitches to select the desired user preset location (41-80).
3. Нажмите МАГАЗИН button again to confirm and save the preset.

Барабан машины

The built-in Drum Machine is useful for timing practice:

• Нажмите БАРАБАНЫ кнопка для активации драм-машины.
• Используйте EDIT/EFFECT buttons to select different drum patterns.
• Используйте VALUE/MASTER VOLUME buttons to adjust the tempo and volume level of the drum patterns.
• Нажмите БАРАБАНЫ button again to deactivate the drum machine.

Хроматический тюнер

The BP80 includes a chromatic tuner for accurate instrument tuning:

• To activate the tuner, simultaneously press both footswitches. The display will show "IN TUNE" or indicate if the note is sharp or flat using the 13-LED array.
• Play a single note on your bass. Adjust your instrument's tuning until the display indicates the note is in tune.
• To exit the tuner, simultaneously press both footswitches again, or simply play through the unit.

Рисунок 3: Наклонный view of the DigiTech BP80, highlighting the expression pedal and control interface.

Обслуживание

Proper care and maintenance will ensure the longevity of your DigiTech BP80.

• Уборка: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
• Хранилище: When not in use for extended periods, store the BP80 in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power supply.
• Источник питания: Always use the original DigiTech power supply. Ensure the power cable is not kinked or pinched.
• Среда: Avoid exposing the unit to excessive moisture, dust, or vibrations.

Поиск неисправностей

If you encounter issues with your BP80, try the following steps before seeking professional service:

• Нет звука на выходе:
  • Проверьте все кабельные соединения (прибор, выход к) amp, power).
  • Ensure the BP80 is powered on and the display is active.
  • Verify the Master Volume setting is not at zero.
  • Bypass the unit to check if the issue is with the BP80 or other equipment in your signal chain.
• Distorted or Unwanted Sound:
  • Check input levels from your bass to ensure they are not too high, causing clipping.
  • Review the gain settings of the active amp model or stompbox effect.
  • Убедитесь, что ваш amplifier's input is not overdriven.
• Педаль экспрессии не реагирует:
  • Ensure the expression pedal is assigned to a parameter within the current preset.
  • Check for any physical obstructions preventing full range of motion.
• Tuner Not Accurate:
  • Ensure only one string is vibrating when tuning.
  • Check instrument intonation.
• Устройство зависает или работает некорректно:
  • Disconnect and reconnect the power supply to perform a soft reset.
  • If issues persist, consult the official DigiTech support resources.

For more detailed troubleshooting or advanced issues, refer to the comprehensive manual available on the DigiTech webсайт или обратитесь в службу поддержки клиентов.

Технические характеристики

Гарантия и поддержка

For detailed warranty information regarding your DigiTech BP80 Bass Multi-Effects Processor, please refer to the warranty card included with your product or visit the official DigiTech webсайт. Условия гарантии могут различаться в зависимости от региона и даты покупки.

For technical support, product registration, or to download the latest firmware updates and comprehensive user manuals, please visit the official DigiTech support page. Keeping your product registered and updated ensures you receive the best possible support and performance.

Note: Always ensure you are using official DigiTech resources for support and information.