Digitus USB to Parallel Centronics Adaptor Cable

Введение

The Digitus USB to Parallel Centronics Adaptor Cable (Model DC USB-PM1) provides a solution for connecting older parallel Centronics printers to modern computers that typically lack a parallel port. This adapter converts a USB 1.1 signal to a Centronics CENT36 signal, enabling compatibility between devices. It supports a data transfer rate of up to 1.2 MB/s, which can be faster than the default 150 KBit/s of a standard parallel interface.

This manual provides essential information for the proper setup, operation, and maintenance of your adapter cable.

Информация по безопасности

• Do not expose the cable to moisture or extreme temperatures.
• Avoid bending or twisting the cable excessively, as this may damage internal wires.
• Хранить в недоступном для детей месте.
• Disconnect the cable from both devices before cleaning.
• Use only as intended for connecting compatible devices.

Содержимое упаковки

Убедитесь, что ваша посылка содержит следующий товар:

• 1x Digitus USB to Parallel Centronics Adaptor Cable (DC USB-PM1)

Image: The Digitus USB to Parallel Centronics Adaptor Cable shown in its retail packaging.

Настраивать

Follow these steps to connect your Digitus USB to Parallel Centronics Adaptor Cable:

1. Connect to Printer: Plug the 36-pin Centronics connector of the adapter cable into the parallel port of your printer. Ensure a secure connection.
2. Подключиться к компьютеру: Insert the USB Type-A connector of the adapter cable into an available USB port on your computer.
3. Установка драйвера: For most modern Windows operating systems, the cable is Plug & Play and will be recognized automatically without the need for additional drivers. The necessary drivers are typically activated by the operating system. In rare cases, for very old operating systems or specific printer models, a driver CD might have been included or drivers may need to be downloaded from the manufacturer's webсайт.
4. Включение питания: Ensure both your printer and computer are powered on.

Image: The Digitus USB to Parallel Centronics Adaptor Cable, showing the USB Type-A connector and the 36-pin Centronics connector.

Операционная

Once the cable is connected and recognized by your computer, your parallel printer should be accessible through the USB connection. The adapter facilitates communication between your computer's USB port and the printer's Centronics port.

• Драйвер принтера: Ensure that the correct printer driver for your specific printer model is installed on your computer. The adapter cable enables the physical connection, but the printer's own software driver is required for proper printing functionality.
• Печать: You can now send print jobs to your parallel printer as you would with a directly connected parallel port.
• Передача данных: The cable supports a data transfer rate of 1.2 MB/s, which is an improvement over the standard parallel interface's typical 150 KBit/s.

Обслуживание

To ensure the longevity and optimal performance of your adapter cable, follow these simple maintenance guidelines:

• Уборка: Для протирки кабеля и разъемов используйте мягкую сухую ткань. Не используйте жидкие чистящие средства или растворители.
• Хранилище: Когда кабель не используется, храните его в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур. Избегайте сильного скручивания кабеля.
• Умение обращаться: При подключении или отключении кабеля всегда берите кабель за разъемы, а не тяните за сам кабель.

Поиск неисправностей

If you encounter issues with your Digitus USB to Parallel Centronics Adaptor Cable, refer to the following common problems and solutions:

• Принтер не обнаружен:
  • Ensure both the USB and Centronics connectors are securely plugged in.
  • Попробуйте подключить USB-разъем к другому USB-порту на вашем компьютере.
  • Verify that your printer is powered on and functioning correctly.
  • Check your computer's Device Manager (Windows) to see if the USB device is listed without errors.
• Printing Errors or No Output:
  • Confirm that the correct printer driver for your specific printer model is installed and up-to-date.
  • Check the printer queue on your computer for any pending or error-status print jobs.
  • Ensure the printer has paper and ink/toner.
  • Restart both your computer and printer.
• Медленная печать:
  • While the adapter supports 1.2 MB/s, the actual print speed can be limited by the printer's capabilities or the printer driver settings.
  • Ensure your computer's USB port is functioning optimally.

Технические характеристики

Гарантия и поддержка

This Digitus product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Digitus webсайт.

For technical support, troubleshooting assistance, or further inquiries, please contact Digitus customer service through their official support channels.