1. Введение
This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.
2. Информация по технике безопасности
WARNING: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.
- Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
- Do not operate the controller with wet hands or in wet conditions.
- Убедитесь, что все соединения надежны и надлежащим образом изолированы.
- Keep the control panel and control box away from water and high humidity.
- This device is intended for controlling sauna stoves. Do not use it for other purposes.
3. Содержимое упаковки
Проверьте наличие всех предметов в упаковке:
- AMAZON CON4 Control Panel
- Control Box (Power Unit)
- Temperature Probe Cable
4. Технические характеристики
| Особенность | Деталь |
|---|---|
| Модель | CON4 |
| Тип | Hand Tool Parts (Sauna Stove Controller) |
| Источник | Материковый Китай |
| Производитель | Qianwang sauna swimming pool equipment |
| Control Panel Dimensions (approx.) | 24.5 см х 21 см х 10 см |
| Вес упаковки (приблизительный) | 7.0 кг |
| Размеры упаковки (приблизительные) | 45 см х 45 см х 45 см |
5. Установка и настройка
Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.
5.1 Идентификация компонентов
Ознакомьтесь с основными компонентами:
- Панель управления: The user interface for setting time and temperature.
- Блок управления: The main power unit that connects to the sauna heater and power supply.
- Температурный зонд: Measures the room temperature in the sauna.
5.2 Подключение проводки
The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.
- Монтаж: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
- Источник питания: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
- Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
- Подключение панели управления: Connect the control panel to the control box using the provided cable.
- Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.
CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.
6. Инструкция по эксплуатации
The CON4 control panel features an intuitive interface for managing your sauna experience.
6.1 Панель управления оконченаview
Панель управления включает в себя:
- Цифровые дисплеи: Two displays show "Time Remaining" and "Room Temperature".
- Кнопки:
- Установить время: Adjusts the sauna operating time.
- Установить температуру: Adjusts the desired sauna room temperature.
- Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
- Включение / выключение света: Controls the sauna room lighting.
- Вкл/Выкл: Powers the sauna heater on or off.
- Стрелки вверх/вниз: Used to increase or decrease time and temperature settings.
6.2 Основные операции
- Включение/выключение питания: Нажмите Вкл/Выкл button to turn the sauna heater system on or off.
- Время схватывания:
- Нажмите Установить время кнопка.
- Используйте Стрелки вверх/вниз to adjust the desired operating time.
- The display will show the remaining time during operation.
- Настройка температуры:
- Нажмите Установить температуру кнопка.
- Используйте Стрелки вверх/вниз to adjust the desired room temperature.
- На дисплее будет отображаться текущая температура в помещении.
- Controlling Light: Нажмите Свет Вкл/Выкл button to toggle the sauna room light.
- Выбор режима: If your sauna heater supports multiple modes, press the Mode A/B кнопку для переключения между ними.
7. Техническое обслуживание
Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.
- Уборка: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Инспекция: Периодически проверяйте надежность всех соединений проводки и отсутствие признаков износа или повреждений.
- Среда: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.
WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.
8. Поиск Неисправностей
If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:
- Нет питания:
- Check the main power supply to the control box.
- Убедитесь, что все электрические соединения надежны.
- Убедитесь, что Вкл/Выкл кнопка нажата.
- Неверные показания температуры:
- Ensure the temperature probe is correctly installed and connected to the control panel.
- Check for any obstructions around the temperature probe that might affect its reading.
- Sauna Heater Not Heating:
- Verify that the desired temperature is set higher than the current room temperature.
- Check the operating time setting; ensure sufficient time is allocated.
- Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).
В случае постоянных проблем обращайтесь в службу поддержки клиентов.
9. Советы пользователю
To enhance your sauna experience and ensure the longevity of your equipment:
- For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
- Always ensure proper ventilation in the sauna room.
- Regularly check the sauna stones and replace them if they are cracked or crumbling.
10. Гарантия и поддержка
10.1 Информация о гарантии
The AMAZON CON4 Sauna Stove Controller comes with the following warranty:
- Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
- Нагревательная трубка: Three (3) months or ninety (90) days warranty.
The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.
Гарантия не распространяется на повреждения, возникшие в результате:
- Incorrect use or operation.
- Negligence or accidental breakage.
- Improper power connection.
- Modification or repair by unauthorized personnel.
After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.
10.2 Поддержка клиентов
По любым вопросам, для получения технической помощи или при обращении по гарантии, пожалуйста, свяжитесь с нами:
- WhatsApp: +86 155766507
- Электронная почта: 1434250503@qq.com
- WeChat: 15576650740
