XTOOL IMMO Key Programmer Series Instruction Manual

1. Продукт закончилсяview

The XTOOL IMMO Key Programmer series offers advanced solutions for automotive key programming and immobilizer functions. This series includes various modules designed to work with XTOOL diagnostic tablets to perform tasks such as key matching, chip programming, and handling all-keys-lost scenarios for a wide range of vehicle brands.

2. Компоненты и комплектация

The XTOOL KC501 Key Programmer kit typically includes the following components:

• KC501 Key Programmer Unit
• PCBA EEPROM Board
• FQFP176 Board
• DC Power Cable (US Standard)
• IC Test Stand
• DC Power Cable (EU Standard)
• Зарядное устройство постоянного тока
• USB-Type B Cable
• Кабель USB-Type C
• IC Clip Cable
• Color Cable
• DuPont Cable
• XTA003 Cable
• XTA002 Cable
• XTA001 Cable
• Инфракрасный коллектор

3. Инструкции по настройке

The XTOOL key programmers are designed to work in conjunction with compatible XTOOL diagnostic tablets (e.g., XTOOL X100PAD3, X100MAX, D8, D9, IK618 series). They are not standalone devices.

3.1 Initial Setup for KC501

1. Распакуйте все компоненты из футляра для переноски.
2. Connect the DC Power Charger to the KC501 unit. Ensure the KC501 lights up, indicating power.
3. Connect the KC501 to your compatible XTOOL diagnostic tablet using the appropriate USB cable (USB-Type B or USB-Type C).
4. Ensure your XTOOL diagnostic tablet is powered on and has the latest software updates installed.

3.2 Connecting Specific Adapters

Depending on the task, you will connect different adapters and cables to the KC501. For EEPROM reading/writing, insert the PCBA EEPROM board into the designated slot on the KC501. For specific key types or chip programming, refer to the detailed instructions provided with your XTOOL diagnostic tablet software.

4. Инструкция по эксплуатации

Each key programmer module offers specialized functions. Always refer to the specific software interface on your XTOOL diagnostic tablet for detailed, step-by-step instructions for each operation.

4.1 XTOOL KC501 Key Programmer Functions

The KC501 is an all-in-one key programmer with enhanced immobilizer functions, building upon the capabilities of the KC100 with added EEPROM and advanced features.

• Read & Write MCU/ECU/EEPROM Chips.
• Read Remote Control Frequency, Chip Type & Transponder ID.
• Generate Dealer Keys.
• Key Matching for Audi/Skoda/VW 4th & 5th generation, MQB, and BMW CAS1-CAS3++.
• Read & Write Infrared Keys for Mercedes-Benz (A Series 2005-2013, B Series 2005-2014, C/CLK Series 2006-2014, CLA Series 2013-2016, CL Series 2006-2013, CLS Series 2006-2013, E Series 2005-2015, G Series -2015, GL/GLS Series 2006-2014, GL/GLK Series 2008-2015, M/ML Series 2006-2013, R Series 2006-2017, S Series 2006-2012, SLK/GLC Series 2006-2016).

4.2 XTOOL KC100 Key Programmer Functions

The KC100 is an essential key programmer, serving as a foundational tool for various key programming tasks.

• Support for Volkswagen / Audi / Skoda 4th generation, 5th generation, MQB key matching.
• Support for Volkswagen / Audi / Skoda 4th generation 96-bit online, 5th generation online, MQB online key matching.
• Support for BMW CAS1-CAS3++ key matching.
• Support for Land Rover's smart key write start function after 2015.
• Support for Fiat, Fischer, 500, Palio and other models.
• Support for Toyota / Lexus all-keys-lost and disassembly-free, enabling 94, 98, 88, A8, A9, 39 simulation key generation.

4.3 XTOOL SK1 Key Programmer Functions

The XTOOL AnyToyo SK1 is a data collector and smart key emulator, crucial for Toyota smart key recovery. It facilitates key cloning for both add key and all-keys-lost situations for 2013+ Toyota models with smart keys. SK1 can also perform emergency starts and generate new keys.

• Supports 2013-2022 Toyota/Lexus Models with 8A/4A Chip Smart Keys.
• Main functions include: Add key, All keys lost, Emergency start, Frequency & key type reading, Generate simulation card and add key, Clone Keys, Password calculation.

Note: SK1 requires an XTOOL tablet and either KC100 or KC501 to function.

4.4 XTOOL KS01 Key Programmer Functions

The XTOOL KS01 is a specialist for Toyota/Lexus all-keys-lost scenarios.

• Supports Toyota/Lexus All-keys-lost without disassembly.
• Intelligently generates new keys.
• Supports Toyota 94/D4, 98, 39, 88/A8, A9 type smart keys all-keys-lost matching with fast speed.
• After matching the key, turn off the power or remove the battery to restore the initial state.

Note: KS01 requires an XTOOL tablet and either KC100 or KC501 to function.

4.5 XTOOL M822 Key Programmer Functions

The XTOOL M822 is an adapter for Toyota 8A Chip All Key Lost Programming and Mercedes-Benz All Keys Lost Communication.

• M822 includes M821 functions. M822 + Benz cable = M822 + M821.
• Supports Toyota 8A All Blade Key Lost Programming.
• Supports 2014-2019 Toyota 4A/8A Smart Key Programming.
• Pincode-free operation.
• Supports Add key/All keys lost.
• No specialized keys needed.
• Supports Mercedes-Benz All Keys Lost (requires BENZ Cable).

5. Техническое обслуживание

To ensure the longevity and optimal performance of your XTOOL Key Programmer devices, follow these maintenance guidelines:

• Уборка: Use a soft, dry cloth to clean the exterior of the devices. Avoid using abrasive cleaners or solvents that could damage the plastic or electronic components.
• Хранилище: Store the devices in their original carrying case in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Уход за кабелем: Handle all cables with care. Avoid bending them sharply or pulling them by the wire. Always grasp the connector when plugging or unplugging.
• Обновления программного обеспечения: Regularly update the software on your XTOOL diagnostic tablet to ensure compatibility with the latest vehicle models and to access new features and bug fixes for the key programmers.
• Инспекция: Periodically inspect the devices and cables for any signs of damage, such as frayed wires, cracked casings, or loose connections. Do not use damaged equipment.

6. Поиск Неисправностей

6.1 Общие вопросы

• Устройство не включается: Ensure the DC Power Charger is securely connected to the KC501 and a working power outlet. Check for any damage to the power cable or charger.
• Connection Issues with Tablet: Verify that the USB cable connecting the key programmer to the XTOOL tablet is securely attached at both ends. Try a different USB port or cable if available.
• Программное обеспечение не распознает устройство: Ensure the XTOOL diagnostic tablet software is up-to-date. Restart both the tablet and the key programmer.

6.2 Specific Programming Issues

• Key Matching Failure: Double-check that the correct vehicle model and year are selected in the diagnostic software. Ensure all connections are stable and the key/chip is correctly placed in the programmer's slot. Verify the key/chip type is supported by the specific programmer module.
• Mercedes Lost Keys with KC501: If experiencing issues with Mercedes lost keys using the KC501 and an XTOOL X100PADS, ensure that the X100PADS software is fully updated and that the KC501 is correctly connected and recognized. Complex procedures like Mercedes all-keys-lost often require specific cable connections and software sequences.

7. Технические характеристики

7.1 Общие технические характеристики устройства

7.2 Key Programmer Specific Features

8. Советы пользователю

• Проверка совместимости: Always ensure your XTOOL diagnostic tablet is compatible with the specific key programmer module you intend to use. For advanced functions like Mercedes lost keys with the KC501, verify compatibility with your XTOOL X100PADS or other diagnostic tool before starting the procedure.
• Обновления программного обеспечения: Keep your XTOOL diagnostic tablet's software updated to the latest version to ensure optimal performance, access to new features, and compatibility with the newest vehicle models and key types.
• Источник питания: Ensure a stable power supply to the key programmer during operation to prevent interruptions that could lead to data corruption or programming failures.

9. Гарантия и поддержка

XTOOL provides comprehensive support for its products:

• Гарантия: All XTOOL products come with a 2-year warranty.
• Техническая поддержка: Enjoy lifetime technical support for your devices.
• Онлайн-сервис: 24-hour online service is available for assistance.