Flipsky FT85BS V2.0 ESC Instruction Manual

1. Введение

The Flipsky FT85BS V2.0 ESC is a high-performance electronic speed controller designed for a wide range of electric vehicles, including electric skateboards, scooters, ebikes, and robotics. It features an ARM Cortex-M4 CPU (AT32F403ARCT7) with a clock speed of 240MHz, enabling a max PWM switching frequency of 25KHz for improved motor RPM. The controller utilizes an aluminum-based PCB, ensuring excellent heat dissipation for reliable operation.

This manual provides essential information for the proper installation, operation, and maintenance of your FT85BS V2.0 ESC.

2. Технические характеристики

Размеры

3. Настройка и установка

3.1 Подключение проводки

Ensure all connections are secure and correctly oriented before powering on the device. Refer to the diagrams below for detailed wiring instructions.

Connecting with Throttle and Brake

Connecting with Bluetooth Module

Connecting with VX4 Remote

3.2 Программирование

The FT85BS V2.0 ESC is highly programmable, allowing compatibility with various motor types, battery voltages, and control methods. Programming can be done via the Flipsky ESC Tool or a compatible Flipsky remote controller.

Programming via Flipsky ESC Tool

Connect the ESC to your computer via the USB port. Use the Flipsky ESC Tool software to configure motor parameters, battery settings, and other control options. Ensure the firmware is V1.4 or above for full compatibility.

Programming via Flipsky VX4 Remote

The ESC can also be programmed using a Flipsky VX4 remote controller (firmware version VX4_V1.4.0 or above). This allows for convenient on-the-go adjustments to settings such as motor rated current identification.

4. Инструкция по эксплуатации

The FT85BS V2.0 ESC supports various control types and startup modes to suit different applications.

4.1 Control Types

• Текущий контроль: Regulates the motor current.
• Duty Cycle Control: Controls the motor speed based on PWM duty cycle.
• Контроль скорости: Maintains a desired motor speed.
• Контроль положения: For precise motor positioning.

4.2 Startup Modes

• IPDS (Sensorless): Inductance Position Detection System for sensorless motor startup.
• HFPI (Sensorless): High-Frequency Pulse Injection for sensorless motor startup.
• HALL (Sensored): Utilizes Hall sensors for precise motor commutation.
• Encoder (ABI, AS5047 encoder SPI interface): Supports various encoder types for advanced control.

4.3 Speed Gear Levels

The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse, allowing for flexible control based on user preference and application requirements.

4.4 Regenerative Capacity

The FT85BS V2.0 ESC features regenerative braking, which allows energy to be recovered and returned to the battery during deceleration, improving efficiency and extending range.

5. Техническое обслуживание

To ensure the longevity and optimal performance of your Flipsky FT85BS V2.0 ESC, follow these maintenance guidelines:

• Регулярный осмотр: Periodically check all wiring connections for looseness, corrosion, or damage. Ensure the motor and power wires (12 AWG) are in good condition.
• Чистота: Keep the ESC free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Avoid using solvents or harsh chemicals.
• Рассеивание тепла: The aluminum case and PCB are designed for excellent heat dissipation. Ensure adequate airflow around the ESC, especially during high-current operation. Avoid obstructing the cooling fins.
• Обновления прошивки: Регулярно проверяйте Flipsky. website for the latest firmware updates. Keeping your firmware up-to-date can improve performance, add new features, and fix bugs.
• Условия окружающей среды: Operate the ESC within its specified temperature and humidity ranges. Extreme conditions can affect performance and lifespan.

6. Поиск Неисправностей

The FT85BS V2.0 ESC incorporates several protection functions to prevent damage. If you encounter issues, consider the following:

6.1 Функции защиты

• Низкая и высокая громкостьtagЭлектронная защита: The ESC will shut down or limit power if the battery voltage goes outside the safe operating range (14-84V). Check your battery voltagе и связи.
• Защита от сверхтока: If the motor draws excessive current, the ESC will protect itself. This could indicate a motor issue, a short circuit, or an overloaded system.
• Temperature Abnormally Protection: The ESC monitors its internal temperature and the motor temperature (if a sensor is used). If temperatures exceed safe limits, power will be reduced or cut off. Ensure proper cooling and avoid continuous high-load operation.
• MOSFETs Over-Temperature and Over-Current Protection: Specific protection for the power MOSFETs.
• Защита от переразряда батареи: Prevents damage to your battery by cutting off power when the voltage падает слишком низко.
• Защита двигателя от перегрева: If a motor temperature sensor is connected and configured, the ESC will protect the motor from overheating.

6.2 Общие шаги по устранению неполадок

1. Проверьте все соединения: Ensure all wires are securely connected and free from damage.
2. Проверьте блок питания: Confirm your battery is charged and providing the correct voltage.
3. Review ESC Tool settings: Connect to the Flipsky ESC Tool and check all configured parameters, especially motor identification and battery cut-off voltagес.
4. Inspect motor: Check the motor for any physical damage or obstructions.
5. Восстановление значений по умолчанию: If unsure about settings, try resetting the ESC to factory defaults via the ESC Tool and reconfigure step-by-step.

7. Советы пользователю

• Proper Parameter Setup: Take your time to correctly set up all motor and battery parameters using the Flipsky ESC Tool. Incorrect settings can lead to poor performance or damage.
• Совместимость прошивки: When using a Flipsky VX4 remote for programming, ensure its firmware version is VX4_V1.4.0 or above for optimal compatibility and functionality.
• Управление теплом: While the aluminum case provides good heat dissipation, consider your application's environment. In high-power or enclosed setups, additional cooling might be beneficial to prevent thermal throttling.
• Управление проводами: Organize and secure all wires to prevent them from snagging, rubbing, or coming loose during operation. This helps avoid intermittent connections and potential shorts.

8. Гарантия и поддержка

For warranty information, technical support, or further assistance, please contact Flipsky customer service or visit the official Flipsky webсайт на https://flipsky.net/. Please have your product model and purchase details ready when contacting support.