Руководство пользователя материнской платы JGINYUE H311M-G D4

1. Введение

The JGINYUE H311M-G D4 is a high-performance Micro-ATX motherboard designed to support Intel LGA 1151 processors, including 6th, 7th, 8th, and 9th generation Core, Pentium, and E3 V5 series CPUs. It features dual-channel DDR4 memory support, a Gigabit network interface, multiple USB and SATA ports, and comprehensive display outputs (HDMI, VGA, DVI). This manual provides essential information for the proper installation, configuration, and maintenance of your motherboard to ensure optimal system performance and stability.

2. Содержимое упаковки

Please check the contents of your motherboard package. If any items are missing or damaged, contact your retailer.

• JGINYUE H311M-G D4 Motherboard
• Экран ввода-вывода
• Кабель для передачи данных SATA

3. Технические характеристики

Below are the detailed technical specifications for the JGINYUE H311M-G D4 Motherboard:

4. Настройка

Before installing the motherboard, ensure your computer case is compatible with the M-ATX form factor and that you have a compatible power supply.

4.1 Установка компонентов

1. Установка процессора:
   • Откройте рычаг разъема процессора.
   • Carefully align the CPU with the socket, ensuring the gold triangle on the CPU matches the marking on the socket.
   • Аккуратно вставьте процессор в разъём. Не прилагайте усилий.
   • Закройте рычаг, чтобы закрепить процессор.
   • Нанесите термопасту и установите кулер на процессор.
2. Установка памяти (ОЗУ):
   • Откройте защелки с обоих концов слотов для модулей памяти DDR4.
   • Совместите модуль памяти со слотом, убедившись, что выемка на модуле совпадает с выступом в слоте.
   • Плотно нажмите на оба конца модуля памяти, пока зажимы не защелкнутся.
3. Graphics Card (PCI-E X16) Installation:
   • Locate the PCI-E X16 slot.
   • Снимите крышку соответствующего слота расширения с корпуса вашего ПК.
   • Align the graphics card with the slot and press down firmly until it is seated correctly and the retention clip locks.
   • Закрепите карту винтом в корпусе.
4. Storage Devices (SATA & M.2 NVME):
   • Диски SATA: Connect SATA data cables from your SSD/HDD to the SATA3.0 ports on the motherboard. Connect power cables from your PSU to the drives.
   • Твердотельный накопитель M.2 NVME: Insert the M.2 SSD into the M.2 slot at an angle, then push it down and secure it with the provided screw.

4.2 Подключение питания и периферийных устройств

Refer to the wiring layout diagram for precise connector locations.

1. Основной разъем питания: Connect the 24-pin ATX power cable from your power supply to the 24-pin motherboard power supply connector.
2. Разъем питания процессора: Connect the 8-pin CPU power supply cable from your power supply to the 8-pin CPU power supply connector.
3. Разъемы на передней панели: Connect the power LED, power switch, reset switch, and HDD LED cables from your case to the corresponding pins on the front panel header (usually labeled F_PANEL). Pay close attention to polarity for LEDs.
4. USB-разъемы: Connect front panel USB 2.0 and USB 3.0 cables to the respective USB headers on the motherboard.
5. Заголовок аудио: Connect the front panel audio cable to the F_AUDIO header.
6. Заголовки вентиляторов: Connect CPU fan to the CPU_FAN header and case fans to the SYS_FAN headers.
7. Задняя панель ввода-вывода: Install the I/O shield into your case. Connect your monitor to the HDMI, DVI, or VGA port. Connect USB peripherals (keyboard, mouse, etc.) to the USB ports. Connect Ethernet cable to the Gigabit NIC port. Connect audio devices to the audio jacks.

5. Инструкция по эксплуатации

5.1 Первая загрузка

After all components are installed and connected, power on your system. The system should display the BIOS/UEFI splash screen. If not, check all power connections and component seating.

5.2 Настройка BIOS/UEFI

Чтобы войти в утилиту настройки BIOS/UEFI, нажмите кнопку ДЕЛ or F2 key repeatedly during the boot process. In the BIOS, you can configure various system settings, including boot order, CPU settings, memory timings, and fan speeds. Save changes before exiting.

5.3 Установка драйвера

After installing your operating system, install the necessary drivers for the motherboard's components. These typically include chipset drivers, network drivers, audio drivers, and any specific drivers for your graphics card. Drivers are usually available on the manufacturer's website or a provided driver disc (if applicable).

6. Техническое обслуживание

• Соблюдайте чистоту: Regularly clean dust from inside your PC case, especially from fans and heatsinks, to prevent overheating. Use compressed air for best results.
• Обновления BIOS: Периодически проверяйте JGINYUE. website for BIOS/UEFI updates. Updates can improve stability, add support for new hardware, or fix bugs. Follow the update instructions carefully to avoid damaging the motherboard.
• Управление кабелями: Убедитесь, что кабели аккуратно проложены, чтобы улучшить циркуляцию воздуха и предотвратить помехи.

7. Поиск Неисправностей

8. Советы пользователю

• Статический разряд: Always ground yourself before handling the motherboard or any internal components to prevent electrostatic discharge (ESD) damage.
• Совместимость компонентов: Double-check CPU and RAM compatibility with the H311 chipset and LGA 1151 socket before purchase. While the board supports 6th-9th gen, specific CPU models might have nuances.
• Настройки BIOS: If experiencing instability, try loading optimized default settings in the BIOS.
• Охлаждение: Ensure adequate airflow within your PC case, especially for the CPU and any installed graphics card, to maintain optimal temperatures.

9. Гарантия и поддержка

For warranty information, technical support, or service inquiries, please contact your point of purchase or refer to the official JGINYUE website for their support resources. Keep your proof of purchase for warranty claims.