Yiflamefly 80W Wall Washer Light Bar

1. Введение

Thank you for choosing the Yiflamefly 80W Wall Washer Light Bar. This manual provides essential information for the safe and efficient operation of your new lighting fixture. Please read this manual thoroughly before installation and use, and keep it for future reference.

This versatile light bar is designed for various applications, including stage lighting, party ambiance, architectural illumination, and more, offering rich RGBW colors and dynamic effects.

2. Информация по технике безопасности

• Обеспечьте входной объемtage matches the specified AC110V-240V 50/60Hz.
• This product has an IP20 protection grade, meaning it is suitable for indoor use or protected outdoor environments. Avoid exposure to water or high humidity.
• Не открывайте корпус: внутри нет деталей, подлежащих обслуживанию пользователем. По всем вопросам обслуживания обращайтесь к квалифицированному персоналу.
• Обеспечьте правильное заземление во избежание поражения электрическим током.
• Хранить вдали от легковоспламеняющихся материалов.
• Избегайте прямого воздействия источника света на глаза.

3. Распаковка и содержимое

Carefully unpack your Yiflamefly Wall Washer Light Bar and inspect it for any damage during transit. Ensure all listed components are present:

• Stage Light Unit (1 or 2 depending on package)
• Light Hook (2 or 4 depending on package)
• Knob (2 or 4 depending on package)
• Power Cord (1 or 2 depending on package)
• Instruction Manual (1 or 2 depending on package)

4. Продукт закончилсяview

Familiarize yourself with the components and connections of your light bar:

5. Настройка

5.1 Монтаж

1. Attach the provided light hooks to the sides of the light bar using the knobs.
2. Securely mount the light bar to a truss, wall, or stand using the light hooks. Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the light bar using the adjustable bracket and tighten the knobs to fix its position.

5.2 Подключение питания

1. Connect the provided power cord to the "POWER IN" port on the rear panel of the light bar.
2. Plug the other end of the power cord into a compatible AC110V-240V 50/60Hz power outlet.
3. Ensure the correct plug type (EU, US, UK) is used for your region.

5.3 Подключение DMX (опционально)

For advanced control, connect the light bar to a DMX controller:

1. Connect a 3-pin XLR cable from the DMX output of your controller to the "DMX IN" port on the first light bar.
2. To daisy-chain multiple light bars, connect a 3-pin XLR cable from the "DMX OUT" port of the first light bar to the "DMX IN" port of the next light bar. Repeat for all fixtures.
3. Ensure the last fixture in the DMX chain has a DMX terminator connected to its "DMX OUT" port for stable signal transmission.

6. Режимы работы

The light bar offers multiple control modes, selectable via the 4-digit digital display and control buttons (MENU, UP, DOWN, ENTER) on the rear panel.

6.1 Навигация по панели управления

• МЕНЮ: Циклически перемещается по опциям главного меню.
• ВВЕРХ ВНИЗ: Позволяет перемещаться по опциям или настраивать значения параметров.
• ВОЙТИ: Подтверждает выбор или сохраняет изменения.

6.2 Доступные режимы

• Самоходный (автоматический режим): The light bar runs through pre-programmed lighting sequences automatically. Select this mode and press ENTER to activate.
• Режим звуковой активации: The light bar reacts to ambient sound via the built-in microphone. Select this mode and press ENTER to activate.
• Режим «главный-подчиненный»: Connect multiple light bars via DMX cables. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's operation.
• Режим управления DMX: For professional control using a DMX controller. Set the DMX address for each fixture using the control panel. The light bar supports 2/4/6/8/112/114 DMX channels and RDM protocol. Refer to your DMX controller's manual for specific programming.

7. Техническое обслуживание

• Always disconnect the power before cleaning or performing any maintenance.
• Clean the lens and housing regularly with a soft, lint-free cloth to maintain optimal light output and appearance. Do not use abrasive cleaners.
• Периодически проверяйте все винты и соединения, чтобы убедиться в их надежности.
• Когда светильник не используется, храните его в сухом, защищенном от пыли месте.

8. Поиск Неисправностей

• Нет питания: Check the power cord connection and the power outlet. Ensure the correct voltagе поставляется.
• Нет светоотдачи: Verify the selected operating mode. If in DMX mode, check DMX connections and address settings.
• DMX не отвечает: Ensure DMX cables are correctly connected (IN to OUT, OUT to IN). Verify DMX address settings on the fixture and controller. Check for a DMX terminator on the last fixture.
• Непоследовательное поведение: Ensure the fixture is not exposed to extreme temperatures or humidity. Reset the fixture by disconnecting and reconnecting power.

9. Технические характеристики

10. Советы пользователю

• DMX Cable Compatibility: While the light bar supports DMX, DMX cables are typically sold separately. Ensure you have the correct 3-pin XLR cables for your setup.
• Универсальное размещение: The adjustable mounting brackets allow for floor standing, wall mounting, or truss hanging. Experiment with different placements to achieve desired lighting effects for parties, events, or architectural accents.
• Использование вне помещений: Although the product has an IP20 rating, it can be used in protected outdoor areas like covered patios or under eaves for building illumination, as shown in some application examples. Just ensure it's shielded from direct rain or heavy moisture.

11. Гарантия и поддержка

По любым вопросам, технической поддержке или гарантийным случаям обращайтесь напрямую к продавцу или производителю. Сохраните чек в качестве подтверждения покупки.