Введение
The DETONGER P2 Mini Thermal Label Printer is a portable, inkless label maker designed for various home and office applications. This manual provides instructions on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance.
Характеристики продукта
- Простота использования: Mini Bluetooth wireless portable thermal label printer for easy mobile phone connection.
- Ink-less Printing: Utilizes thermal printing technology, eliminating the need for ink, toner, or ribbons. Prints in black and white.
- Powerful Free App: Features a dedicated app with numerous templates for various label types, including clothing, price, cable, jewelry, address, folder, food, and name labels.
- Editable Content: Supports editing text, barcodes, logos, images, tables, time, and lines.
- Компактный и портативный: Palm-sized design (128x86x62mm, 249g) for easy carrying and printing anywhere.
- Аккумуляторная батарея: Built-in 1500mAh Li-ion battery provides up to 2 hours of continuous printing.
- USB-порт типа C: Modern Type-C charging port for convenience.
- Широкая совместимость этикеток: Supports label widths ranging from 15mm to 55mm.
Содержимое упаковки
Проверьте комплектацию на наличие следующих предметов:
- DETONGER P2 Mini Thermal Label Printer
- USB-кабель для зарядки
- Руководство пользователя (этот документ)
- 3 rolls of thermal self-adhesive white label paper (specific sizes may vary based on purchase)
Руководство по настройке
1. Включение
- Press and hold the power button on the front of the printer until you hear a beep, indicating the printer is on. The indicator light will illuminate.
2. Загрузка этикеточной ленты
- Press the "OPEN" button located on the side of the printer to open the paper compartment.
- Insert the label tape roll into the compartment with its printable surface facing downward.
- Slide the orange baffles inward to secure the label tape roll in place.
- Close the paper compartment cover. Ensure approximately 0.1-0.2 inches of label paper is left outside the printer.
- Press the power button once to feed a blank label and align it for printing.
3 Установка приложения и подключение по Bluetooth
- Download and install the "WePrint" app from your device's app store (available for iOS, Android, HarmonyOS, and PC).
- Open the "WePrint" app.
- In the app, search for and connect to the printer via Bluetooth. The printer's indicator light will turn solid blue when successfully connected.
Инструкция по эксплуатации
1. Editing Content in the App
- Once connected, select a template or create a new label within the "WePrint" app.
- Utilize the app's editing tools to customize text, add barcodes, logos, images, tables, and other elements. The app supports multiple languages and fonts.
- Adjust print settings such as print darkness, print speed, and orientation as needed.
2. Печать этикеток
- After editing your label, tap the "Print" button in the app.
- The printer will feed and print the label.
- Carefully tear off the printed label.
3. Приложения
The DETONGER P2 is versatile for various labeling needs:
- Дом и офис: Organize storage, label files, mark pens, books, and customer files.
- Розничная торговля: Создать цену tags for clothing, jewelry, and other products.
- Пищевая промышленность: Label food containers with dates, ingredients, and prices.
Обслуживание
1. Очистка печатающей головки
Для поддержания качества печати регулярно очищайте печатающую головку:
- Ensure the printer is turned off and disconnected from power.
- Откройте отсек для бумаги.
- Аккуратно протрите печатающую головку ватным тампоном.ampпропитан изопропиловым спиртом.
- Allow the print head to dry completely before closing the compartment and using the printer.
2. Уход за аккумулятором
Чтобы продлить срок службы батареи:
- Перед первым использованием полностью зарядите принтер.
- Избегайте частой полной разрядки аккумулятора.
- Если вы храните принтер в течение длительного времени, зарядите его примерно до 50% и подзаряжайте каждые несколько месяцев.
- Используйте только прилагаемый USB-кабель для зарядки.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Принтер не включается | Low battery or power button not pressed long enough. | Charge the printer. Press and hold the power button for 3-5 seconds. |
| Невозможно подключиться через Bluetooth | Bluetooth is off on your device, printer is out of range, or app connection issue. | Ensure Bluetooth is enabled. Move closer to the printer. Restart the app and printer, then try connecting again. |
| Низкое качество печати (слабое, размытое изображение). | Print head is dirty, label paper is old/damaged, or print darkness setting is too low. | Clean the print head. Replace label paper. Increase print darkness in the app settings. |
| Paper jam or misfeed | Label roll not inserted correctly, or foreign object in paper path. | Open the compartment, remove the label roll, clear any obstructions, and re-insert the roll correctly. Ensure baffles are adjusted. |
| Printer stops responding | Временный сбой программного обеспечения. | Turn off the printer, wait a few seconds, then turn it back on. |
Технические характеристики
| Особенность | Спецификация |
|---|---|
| Название бренда | ДЕТОНЖЕР |
| Модель | P2 |
| Тип | Термопринтер, этикеточный принтер |
| Метод печати | Inkless thermal |
| Макс. разрешение | 203 точек на дюйм |
| Скорость печати | 20ppm |
| Ширина этикетки | 15-55мм |
| Связность | Bluetooth, USB (тип C) |
| Аккумулятор | 1500mAh x 3.7V Built-in Li-ion |
| Время зарядки | 4-5 часа |
| Время выполнения | Примерно 2 часа непрерывной печати |
| Размеры (ДxШxВ) | 128x86x62мм |
| Масса | 249 г |
| Томtage | 220-240 В (±10%) |
| Сертификация | CE, FCC, RoHS |
Советы пользователей
- Предварительно нарезанные этикетки: For best results and to avoid waste, ensure your label design fits within the label size you are using.
- Обновления приложений: Regularly check for updates to the "WePrint" app to access new features, templates, and performance improvements.
- Хранение этикеток: Store thermal labels in a cool, dry place away from direct sunlight and heat to prevent premature fading.
- Пробные отпечатки: Before printing a large batch, perform a test print to verify settings and content accuracy.
- Оптимизация батареи: To maximize printing time, ensure the printer is fully charged before extended use.
Гарантия и поддержка
The DETONGER P2 Mini Thermal Label Printer comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, troubleshooting assistance, or warranty claims, please contact the DETONGER Official Store customer service through the platform where you purchased the product. Please provide your order number and a detailed description of the issue.
