1. Введение
The NOYAFA NF-825TMR is a versatile 6-in-1 electrical kit designed for comprehensive circuit tracing and testing. This multifunction device includes a transmitter, a receiver, and an outlet tester, enabling users to trace circuits and electric wires, locate circuit breakers, detect wiring faults, test outlets, find network cables, and detect voltage. It is an essential tool for professionals and DIY enthusiasts alike, offering precision and safety in various electrical tasks.
Image: The NOYAFA NF-825TMR Transmitter and Receiver units.
2. Информация по технике безопасности
- Перед эксплуатацией устройства обязательно прочтите и изучите данное руководство.
- Не используйте устройство, если оно повреждено или неисправно.
- При работе с находящимися под напряжением цепями необходимо обеспечить надлежащую изоляцию и использовать средства индивидуальной защиты (СИЗ).
- Never attempt to open or modify the device. Refer all servicing to qualified personnel.
- Берегите устройство от воды и экстремальных температур.
- Используйте только прилагаемые аксессуары и зарядный кабель.
3. Содержимое упаковки
При открытии упаковки, пожалуйста, проверьте наличие всех следующих предметов:
- Transmitter (1 pc)
- Receiver (1 pc)
- Руководство пользователя (1 шт.)
- 825TMR Box (1 pc)
- 825TMR Kit (1 pc)
- Multimeter Adapter Cable (1 pc)
- Alligator Clip (1 pc)
- Exclusive Accessory Cable (1 pc)
- Зарядный кабель Type-C (1 шт.)
- Quality Certificate (1 pc)
Image: The product box displaying the list of included accessories.
4. Продукт закончилсяview
The NF-825TMR consists of three main components: the Transmitter (NF-825T), the Receiver (NF-825R), and the Socket Test unit (NF-825M). Familiarize yourself with the buttons, ports, and indicators on each unit.
Image: Detailed diagram illustrating the buttons and ports on the Transmitter, Receiver, and Socket Test unit.
Transmitter (NF-825T)
- Кнопка питания: Включает / выключает устройство.
- Переключатель «Сканирование/В режиме реального времени/Выкл.»: Selects operating mode for tracing.
- Световой индикатор: Shows power status and signal.
- Порт зарядки типа C: Для зарядки внутренней батареи.
- Network Cable Tracking Port (RJ45): Для подключения сетевых кабелей.
- Positive/Negative Electrodes: For connecting alligator clips.
Receiver (NF-825R)
- Кнопка питания: Включает / выключает устройство.
- Переключатель чувствительности: Adjusts signal sensitivity (0-9).
- Индикатор сигнала: LED lights (1-3) indicate signal strength.
- Индикатор питания: Показывает состояние питания.
- Кнопка СКАН: Initiates scanning mode.
- Кнопка разъема: Activates socket test mode.
- Кнопка NCV: Активирует бесконтактную версию Vol.tagе обнаружение.
- Выключатель освещения: Turns the LED light on/off.
- Зонд: For detecting signals and voltage.
- Порт зарядки типа C: Для зарядки внутренней батареи.
Socket Test Unit (NF-825M)
- 3-контактная вилка питания: For connecting to standard outlets.
- Кнопка GFCI: Tests Ground Fault Circuit Interrupter functionality.
- Показатели: LEDs show wiring status (Correct, Open Ground, Open Neutral, Open Hot, Live/NEU Rev, Live/GRD Rev, Open GRD).
5. Настройка
5.1 Зарядка устройства
Both the Transmitter and Receiver units are powered by a 7.4V 700mA lithium battery and feature a Type-C charging port. To charge:
- Connect the provided Type-C charging cable to the charging port on the Transmitter and/or Receiver.
- Plug the other end of the cable into a DC 5V 1A power adapter (not included).
- The power indicator will show charging status. Ensure both units are fully charged before use for optimal performance.
Image: Illustration of the Type-C charging process for the Transmitter and Receiver.
6. Инструкция по эксплуатации
6.1 Circuit Tracing (Live/Energized or Open/De-energized)
The NF-825TMR can trace live (energized) or open (de-energized) circuits, conduits, pipes, and single wires within a bundle. The probe and tone generator provide precise indications through various materials.
- For Live Circuits: Connect the Transmitter to the live circuit using the appropriate adapter cable and alligator clips. Set the Transmitter switch to 'Live'.
- For Open Circuits: Connect the Transmitter to the de-energized circuit. Set the Transmitter switch to 'Scan'.
- Turn on the Receiver and adjust the Sensitivity Switch (0-9) to an appropriate level.
- Move the Receiver's probe along the suspected path of the wire. The signal indicators and audible tone will guide you to the wire's location.
Image: Demonstrating the detection of hidden wires in a live circuit.
6.2 Circuit Breaker Finding
To locate the corresponding circuit breaker for an outlet:
- Plug the Socket Test unit into the desired outlet.
- Turn on the Receiver and set it to 'SCAN' mode.
- Move the Receiver's probe along the circuit breakers in the electrical panel. The Receiver will indicate the correct breaker with a strong signal and audible tone.
Image: Using the NF-825TMR to identify circuit breakers in an electrical panel.
6.3 GFCI Outlet Testing and Wiring Fault Detection
The Socket Test unit can detect common wiring problems and test GFCI receptacles:
- Plug the Socket Test unit directly into the outlet you wish to test.
- Observe the LED indicators on the Socket Test unit. They will illuminate to show the wiring status (e.g., Correct, Open Ground, Open Neutral, Open Hot, Live/NEU Rev, Live/GRD Rev, Open GRD).
- To test GFCI functionality, press the 'GFCI' button on the Socket Test unit. A working GFCI should trip, cutting power to the outlet.
Image: Performing a socket test and GFCI check with the NF-825TMR.
6.4 Network Cable Tracing (RJ45)
To locate network cables (CAT5/CAT6) with the Transmitter and Receiver:
- Set the Transmitter switch to 'SCAN' mode.
- Insert one end of the RJ45 network cable into the tracking port on the Transmitter.
- Turn on the Receiver and adjust sensitivity.
- Use the Receiver's probe to trace the network cable. The signal strength will increase as you approach the target cable.
Image: Using the Transmitter to locate a network cable.
Image: Tracing a network cable connected to a PoE switch.
6.5 NCV (бесконтактный объем)tagд) Обнаружение
The Receiver's probe can detect AC voltagбез прямого контакта:
- Включите приемник.
- Press the 'NCV' button to activate NCV mode.
- Bring the probe close to the object or wire you suspect carries voltage. The signal indicators and audible tone will activate if voltagе обнаружен.
Image: Using the NCV Induction Pen feature to detect voltage.
6.6 светодиодное освещение
The Receiver is equipped with an LED light for improved visibility in low-light conditions:
- Press the 'Lighting Switch' button on the Receiver to turn the LED light on or off.
Image: The Receiver's LED light illuminating a dark area.
6.7 Регулировка чувствительности
The Receiver features a sensitivity switch to optimize detection based on the environment:
- Rotate the Sensitivity Switch (labeled 0-9) on the Receiver to increase or decrease the detection sensitivity. Adjust as needed to filter out interference or detect weaker signals.
Image: Diagram illustrating the Sensitivity Switch on the Receiver.
7. Техническое обслуживание
- Уборка: Протирайте устройство сухой мягкой тканью. Не используйте абразивные чистящие средства или растворители.
- Хранилище: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the device is fully charged before long-term storage.
- Аккумулятор: The device uses a rechargeable lithium battery. If the device will not be used for an extended period, charge it periodically to maintain battery health.
8. Поиск Неисправностей
- Устройство не включается: Убедитесь, что аккумулятор заряжен. Подключите зарядное устройство Type-C и повторите попытку.
- В ходе трассировки сигнал не обнаружен: Check that the Transmitter is correctly connected and in the appropriate mode (Scan/Live). Adjust the Receiver's sensitivity. Ensure the circuit is active if tracing a live circuit.
- Неточные показания: Ensure there is no strong electromagnetic interference nearby. Re-calibrate by moving away from potential interference sources and re-testing.
- Socket Test indicators not lighting up: Ensure the outlet has power. Check the Socket Test unit for any visible damage.
9. Технические характеристики
| Особенность | Параметр |
|---|---|
| Модель продукта | НФ-825ТМР |
| Кабель питания переменного тока Trace | Трейс Пауэр Томtage Range: AC 90V~250V |
| Interface Type: Alligator clip | |
| Transmitter Distance: 200m | |
| Transmitter Frequency: 157KHz | |
| Обнаружение глубины | 0~0.5м |
| Тип кабеля | CAT5 / CAT6 |
| Тестирование сетевого кабеля | Network Interface Type: RJ45 |
| Transmitter Frequency: 455KHz | |
| Transmitter Distance: 600m | |
| Отслеживание воздушных автоматических выключателей | Transmitter Distance: 600m |
| Detecting Depth: 2~3cm | |
| Проверка последовательности подключения кабеля розетки | Тестирование Voltage Range: AC 90V~250V, 50/60Hz |
| Обнаружение NCV | 90В~1000В переменного тока, 50/60Гц |
| Светодиод Lamp | Да |
| Источник питания | Литиевая батарея 7.4 В 700 мА |
| Характеристики адаптера питания | DC 5V/1A Тип-C |
| Рабочая температура | 0~122°F (0~50°C) |
| Рабочая влажность | ≤90% без конденсации |
| Температура хранения | 14~122°F (-10~50°C) |
| Размер передатчика | 72 х 34 х 148 мм |
| Размер приемника | 40 х 34 х 205 мм |
Image: Detailed product parameter table for the NF-825TMR.
10. Советы пользователю
- For best results when tracing wires, ensure the area is free from excessive electromagnetic interference from other active devices.
- When using the NCV function, approach the suspected voltage source slowly to get an accurate reading and avoid false positives.
- Regularly check the battery levels of both the Transmitter and Receiver to avoid interruptions during critical tasks.
11. Гарантия и поддержка
NOYAFA products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or the official NOYAFA webСохраните чек в качестве подтверждения покупки.
