1. Введение
The GEPRC SPEEDX2 3214 860KV motor is specifically engineered for 9-10 inch long-range FPV drones. Its large size delivers powerful thrust, while the 860KV rating provides significant torque, making it suitable for various payloads. The motor features a distinctive red and black aesthetic and incorporates a high-end bearing shaft for smooth and reliable operation.
2. Особенности
- Integrated outer rotor design with high-precision CNC aluminum alloy construction.
- High-temperature resistant enameled wire for enhanced stability under demanding conditions.
- Personalized hollow appearance reduces weight while maintaining high power output.
- Utilizes N52H magnetic steel for a high magnetic energy product and stronger magnetic field.
3. Технические характеристики
| Атрибут | Ценить |
|---|---|
| Модель | SPEEDX2 3214 Motor |
| KV | 860КВ |
| Конфигурация | 12Н14П |
| Магнит | N52H |
| Материал ротора | 7075-T6 Aviation Aluminum Alloy |
| Диаметр статора | 32 мм |
| Высота статора | 14 мм |
| Диаметр выходного вала | Φ5мм |
| Размеры | Φ42 мм * 49.8 мм |
| Outlet Specification | 16AWG 500 мм |
| Номинальный объемtage | 25.2V 6S (LiPo) |
| Максимальная мощность (Вт) | 1867.11 Вт |
| Максимальный ток (А) | 77.8А |
| Монтажное отверстие | 19x19 мм (M3) |
| Цвет | Красный и черный |
| Масса | 155.0 г |
| Применимые модели | Suitable for 9-10 inch models |
4. Содержимое упаковки
В комплект поставки входят следующие предметы:
- 1 x SPEEDX2 3214 Motor
- 4 x M3*9 Round Head Screws
- 1 x M5 Anti-slip Nut
5. Установка и настройка
5.1 Установка двигателя
- Ensure your drone frame is compatible with 19x19mm (M3) motor mounting patterns.
- Align the motor with the mounting holes on your drone's arm.
- Secure the motor using the provided 4 x M3*9 round head screws. Do not overtighten to avoid damaging the motor or frame.
5.2 Электрическое подключение
- Connect the 16AWG motor wires to your Electronic Speed Controller (ESC).
- Ensure correct polarity and phase connections. For brushless motors, the order of the three motor wires can be swapped to change the motor's rotation direction if needed.
- It is recommended to solder the motor wires directly to the ESC for a secure and low-resistance connection.
- Verify that your ESC is rated for 6S LiPo input and can handle the motor's maximum current of 77.8A.
5.3 Установка пропеллера
- Choose propellers suitable for 9-10 inch models.
- Place the propeller onto the Φ5mm output shaft.
- Secure the propeller with the provided M5 anti-slip nut. Ensure the nut is tightened sufficiently to prevent the propeller from loosening during flight, but do not overtighten.
6. Инструкция по эксплуатации
6.1 Предполетные проверки
- Before each flight, visually inspect the motors for any damage, loose wires, or debris.
- Ensure all mounting screws and propeller nuts are securely fastened.
- Check that the propellers are free from cracks or damage.
6.2 Включение
- Connect a fully charged 6S LiPo battery to your drone.
- Listen for the ESC initialization tones.
- Arm your drone according to your flight controller's instructions.
6.3 Вопросы, касающиеся полета
- The 860KV rating is optimized for long-range FPV, providing a balance of thrust and efficiency.
- Monitor motor temperatures during initial flights, especially when carrying heavy payloads or flying aggressively.
- Avoid prolonged operation at maximum throttle to prevent overheating and premature wear.
7. Техническое обслуживание
- Уборка: Regularly clean the motors to remove dust, dirt, and debris that can accumulate in the bearings or stator. Use compressed air or a soft brush.
- Инспекция: Periodically check the motor's shaft for bends, the bell for dents, and the wires for fraying or damage.
- Уход за подшипниками: While the motor uses high-quality bearings, extreme conditions or impacts can affect them. If you notice unusual noise or resistance, consider replacing the bearings.
- Хранилище: Store motors in a clean, dry environment away from direct sunlight and extreme temperatures.
8. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Двигатель не вращается или работает с перебоями | Loose wire connection; ESC not calibrated; Damaged motor winding/bearing; Incorrect ESC settings. | Check all solder joints and wire connections. Recalibrate ESCs. Inspect motor for physical damage. Verify ESC settings (e.g., motor timing). |
| Перегрев двигателя | Over-propped; Excessive load; Insufficient airflow; Damaged bearings. | Use smaller or less aggressive propellers. Reduce payload. Ensure adequate ventilation. Check and replace bearings if necessary. |
| Чрезмерная вибрация или шум | Unbalanced propeller; Bent motor shaft; Loose motor mounts; Damaged bearings. | Balance propellers. Inspect motor shaft for bends. Tighten motor mounting screws. Replace worn bearings. |
| Сниженная тяга или эффективность | Damaged propeller; Weak battery; Motor degradation. | Replace damaged propellers. Use a healthy, fully charged battery. Consider motor replacement if significant degradation is observed. |
9. Советы пользователю
- For optimal performance and longevity, ensure your ESC firmware is up-to-date and properly configured for brushless motors.
- Always perform a motor direction check after installation and before propeller attachment to prevent unexpected thrust.
- Consider using thread-locking compound on motor mounting screws to prevent them from vibrating loose during flight.
- When selecting propellers, match them to the motor's KV and your drone's weight for the best balance of thrust and efficiency.
10. Информация по технике безопасности
⚠ Только для развлекательного использования. Незаконная модификация дронов/самолётов запрещена. Также ознакомьтесь с действующими законами и правилами использования дронов/самолётов в вашей стране/регионе, чтобы гарантировать законность использования.
- Always operate FPV drones responsibly and in accordance with local laws and regulations.
- Держите пальцы и свободную одежду подальше от вращающихся винтов.
- Disconnect the battery when performing maintenance or installation to prevent accidental motor activation.
- Never operate damaged equipment.
11. Гарантия и поддержка
For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty-related inquiries.