Kllisre CPU Water Cooling Cooler Instruction Manual

Введение

The Kllisre CPU Water Cooling Cooler is an All-in-One (AIO) liquid cooling solution designed to efficiently dissipate heat from your CPU, ensuring stable performance and extended lifespan. Featuring vibrant RGB lighting, this cooler enhances the aesthetic appeal of your PC build while providing superior thermal management. It is compatible with a wide range of Intel and AMD CPU sockets, offering versatility for various system configurations.

Технические характеристики

Содержимое упаковки

Пожалуйста, проверьте наличие всех компонентов в упаковке:

• Kllisre AIO Liquid Cooler (Radiator with integrated pump and cold plate)
• RGB Fan(s) (1 for W120, 2 for W240)
• Mounting hardware for Intel sockets (LGA 1150/1151/1155/1200/1366/2011/2011-3/1170/AM5)
• Mounting hardware for AMD sockets (AM2+/AM3/AM4/FM1/FM2/FM2+/Strx4)
• Термопаста (предварительно нанесенная или в тюбике)
• Винты вентилятора и винты радиатора

Figure 1: Kllisre AIO Cooler Components and Dimensions

Настройка и установка

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and header locations.

1. Подготовьте процессор: Clean any old thermal paste from your CPU and CPU cooler mounting area.
2. Установите заднюю панель (при необходимости): For Intel sockets, install the appropriate backplate behind the motherboard. AMD sockets typically use the stock backplate.
3. Прикрепите монтажные кронштейны: Secure the correct mounting brackets to the pump/cold plate assembly according to your CPU socket type.
4. Нанесите термопасту: If thermal paste is not pre-applied to the cold plate, apply a small pea-sized amount to the center of your CPU's Integrated Heat Spreader (IHS).
5. Монтаж насоса/охлаждающей пластины: Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes. Secure it with the provided screws, tightening them in a diagonal pattern until snug. Do not overtighten.
6. Install Fans on Radiator: Attach the RGB fan(s) to the radiator using the longer fan screws. Ensure the fan airflow direction is as desired (typically blowing through the radiator).
7. Крепление радиатора: Install the radiator into your PC case in an appropriate location (e.g., front, top, or rear), using the shorter radiator screws. Ensure there is adequate clearance for the tubes and fans.
8. Соединительные кабели:
   • Мощность насоса: Connect the 3-pin pump cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
   • Мощность вентилятора: Connect the 3-pin fan cable(s) to CPU_FAN or SYS_FAN headers on your motherboard. If using multiple fans, you may need a fan splitter (not included) or a fan hub.
   • RGB-подсветка: Connect the RGB cable(s) from the fan(s) and pump to a compatible RGB header on your motherboard (e.g., 12V RGB header) or an external RGB controller (if included/purchased separately).

Figure 2: Fan and Pump Electrical Connections

Figure 3: Kllisre 120mm AIO Cooler Overview

Figure 4: Kllisre 240mm AIO Cooler Overview

Инструкция по эксплуатации

Once installed and all cables are securely connected, power on your computer. The Kllisre AIO cooler will automatically begin circulating coolant and the fans will spin to cool the radiator. The RGB lighting on the fans and pump will illuminate.

• Регулировка скорости вентилятора: Fan speeds are typically controlled by your motherboard's BIOS/UEFI settings or through motherboard software. Adjust fan curves to balance cooling performance and noise levels.
• Управление RGB-освещением: The RGB lighting is controlled via your motherboard's RGB software (if connected to a compatible header) or through a dedicated RGB controller if one was included or purchased separately. Refer to your motherboard's manual for RGB software details.

Обслуживание

Proper maintenance ensures optimal performance and longevity of your liquid cooler.

• Очистка от пыли: Periodically (e.g., every 3-6 months), use compressed air to clean dust from the radiator fins and fan blades. Ensure the fans are not spinning while cleaning to prevent damage.
• Осмотрите трубки: Occasionally check the tubing for any signs of kinks, cracks, or leaks. While AIO coolers are sealed systems, visual inspection can help identify potential issues early.
• Термопаста: Термопаста обычно служит несколько лет. Если вы заметили значительное повышение температуры процессора, подумайте о нанесении новой термопасты.

Поиск неисправностей

• Высокие температуры процессора:
  • Ensure the pump and fans are properly connected and spinning.
  • Verify the cold plate is making full contact with the CPU and thermal paste is correctly applied.
  • Check for dust buildup on the radiator.
  • Adjust fan curves in BIOS/UEFI for higher speeds if necessary.
• Шум насоса: A slight hum is normal. Excessive gurgling or grinding might indicate air bubbles or a failing pump. Gently tilt your PC case to help dislodge air bubbles.
• Шум вентилятора: Check for loose fan screws or obstructions. Adjust fan speeds in BIOS/UEFI.
• RGB-подсветка не работает:
  • Ensure RGB cables are securely connected to the motherboard header or controller.
  • Verify the RGB header on your motherboard is enabled in BIOS/UEFI.
  • Check motherboard RGB software settings.
• Проблемы совместимости: If the cooler does not fit your socket, double-check the included mounting hardware against your motherboard's specifications. The Kllisre cooler supports a wide range of Intel and AMD sockets as listed in the specifications.

Советы пользователей

• Совместимость сокетов: This cooler is designed for a broad range of sockets including Intel LGA 115x, 1200, 1366, 2011, 1170, AM5 and AMD AM3, AM4. Always confirm your specific motherboard socket before installation.
• TDP Considerations: While AIO coolers are generally efficient, consider the Thermal Design Power (TDP) of your CPU. For high-end CPUs like Ryzen 7 5700x or Intel i5 12600KF, a 240mm radiator (W240) is generally recommended over a 120mm (W120) for better cooling performance.
• Настройка RGB: If your motherboard supports RGB sync technologies (like Aura Sync), connect the cooler's RGB cables to the appropriate header for software control. If not, the cooler may have a default RGB cycle or require a separate controller.
• Замена вентилятора: The fans are standard sizes (120mm). If you wish to replace them with different fans, ensure they are compatible with the radiator and your motherboard's fan headers.
• Термопаста: Most Kllisre AIO coolers come with thermal paste pre-applied or included in the package. Ensure it is applied correctly for optimal heat transfer.

Гарантия и поддержка

Your Kllisre CPU Water Cooling Cooler comes with the following:

• Политика возврата в течение 7 дней: В случае обнаружения каких-либо проблем с качеством товара, вы можете вернуть его в течение 7 дней.
• Гарантия 1 года: All products from the seller typically include a 1-year warranty from the store.

For technical support, warranty claims, or any product-related inquiries, please contact the seller directly through the platform where you purchased the product.

Рисунок 5: Гарантия и обслуживание истеклиview