1. Введение
The FTVOGUE Water Level Controller is an automatic liquid level management device designed for various applications, including water tanks and pump systems. It monitors liquid levels and activates or deactivates a water pump to maintain desired levels. This controller features adjustable sensitivity and is constructed from durable ABS material for reliable performance.
2. Информация по технике безопасности
- Перед установкой или техническим обслуживанием обязательно отключите источник питания, чтобы предотвратить поражение электрическим током.
- Монтаж должен выполняться квалифицированным персоналом или под профессиональным надзором.
- Do not expose the controller to extreme temperatures or corrosive environments beyond its specified operating range.
- Verify all wiring connections are secure and correct according to the provided diagram to avoid damage to the unit or connected equipment.
- This device is designed for liquid level control. Do not use it for purposes other than its intended function.
3. Особенности продукта
- Автоматическое управление: Monitors liquid levels and activates the water pump to maintain the optimal level.
- Регулируемая чувствительность: Customize sensitivity settings for precise level detection.
- Прочная конструкция: Made from ABS material for long-lasting performance.
- Широкая совместимость: Suitable for various applications including oil tanks and water storage.
- Простая установка: Quick setup with options for screw positioning or electric box track mounting.
4. Содержимое упаковки
Пожалуйста, проверьте комплектность при получении:
- 1 x FTVOGUE Water Level Controller
- 1 x Small Screwdriver (for sensitivity adjustment)
Image: The FTVOGUE Water Level Controller shown with a small screwdriver, which is included for adjustments.
5. Технические характеристики
| Тип товара | Регулятор уровня воды |
| Материал | АБС |
| Vol входtage | AC100V-260V, 50/60 Гц |
| Рабочий ток | Working current ≤ 110mA, static current consumption ≤ 20mA |
| Load Power (Resistive) | < 1.6KW (Note: Overload or three-phase load requires additional AC contactor) |
| Load Power (Inductive) | < 1KW (Note: Overload or three-phase load requires additional AC contactor. Inductive load refers to loads with inductive coils, such as motors, electromagnets, solenoid valves, etc.) |
| Выход сигнала тревоги | 800W (resistive load) normally open, normally closed output |
| Режим вывода | Normally open, normally closed output |
| Входной сигнал | Induction signal input |
| Sensing Head Interface Voltage | DC12V |
| Рабочая температура | -20 до 105 ℃ |
| Общий размер | Приблизительные размеры: 115 x 90 x 40 мм / 4.53 x 3.54 x 1.57 дюйма |
| Номер модели | FTVOGUElin8szu9v5 |
| Страна происхождения | Китай |
6. Настройка и установка
The FTVOGUE Water Level Controller offers flexible installation options, including screw positioning or mounting on an electric box track. Proper wiring is crucial for correct operation.
6.1 Схема электропроводки
Refer to the following diagram for correct wiring connections. Ensure all connections are secure before applying power.
Image: A detailed wiring diagram illustrating connections for the FTVOGUE Water Level Controller with a pump and water tanks. It shows input power (AC 220V), sensor connections (K1, K2, M), and output connections (N.O., N.C., N).
6.2 Монтаж
Mount the controller in a dry, protected location using screws or by attaching it to a compatible electric box track. Ensure adequate ventilation around the unit.
6.3 Размещение датчика
Position the liquid level sensors at the desired high and low points within your tank or reservoir. Ensure sensors are securely fixed and free from obstructions that might interfere with accurate level detection.
7. Инструкция по эксплуатации
Once installed and wired correctly, the controller will automatically monitor liquid levels and operate the connected pump as configured.
7.1 Automatic Level Control
The controller will activate the pump when the liquid level drops below the lower sensor and deactivate it when the level reaches the upper sensor, maintaining the liquid within the set range.
7.2 Регулировка чувствительности
The sensitivity of the controller can be adjusted to suit different liquid types or environmental conditions. Use the provided small screwdriver for this adjustment.
Изображение: крупный план view of the FTVOGUE Water Level Controller with instructions on how to adjust sensitivity. To adjust, remove the plastic cover, locate the small screw, turn clockwise to reduce sensitivity, and counterclockwise to increase sensitivity.
- Remove the plastic cover of the controller.
- Locate the very small screw inside the unit.
- Поверните винт по часовой стрелке, чтобы уменьшать чувствительность.
- Turn the screw counterclockwise to увеличивать чувствительность.
8. Техническое обслуживание
- Regularly inspect the controller and sensors for any signs of damage or wear.
- Keep the controller unit clean and free from dust and moisture.
- Периодически проверяйте все соединения проводки, чтобы убедиться в их надежности и прочности.
- Clean the liquid level sensors as needed to prevent buildup that could affect accuracy.
9. Поиск Неисправностей
- Контроллер не включается: Проверьте входную громкость.tage supply and ensure all power connections are correct and secure.
- Pump not activating/deactivating: Verify sensor placement and cleanliness. Check wiring to the pump and ensure the load power specifications are not exceeded. Adjust sensitivity if necessary.
- Inaccurate level detection: Clean the sensors thoroughly. Ensure sensors are not obstructed and are placed correctly at the desired levels. Adjust sensitivity.
- Overload issues: If using an inductive load (motor, solenoid valve) or a three-phase load, ensure an additional AC contactor is used as specified in the specifications.
10. Гарантия и поддержка
Для получения информации о гарантии или технической поддержке обратитесь к упаковке продукта или свяжитесь с продавцом. Сохраните чек в качестве подтверждения покупки.