MCombo M7632

MCombo M7632 3-Motor Power Lift Recliner with Massage and Heat User Manual

Model: M7632 (6160-7634) | Brand: MCombo

1. Введение

Thank you for choosing the MCombo M7632 3-Motor Power Lift Recliner. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions thoroughly before use and retain them for future reference.

MCombo M7632 Power Lift Recliner in a living room setting

Image 1.1: The MCombo M7632 Power Lift Recliner in Coffee color.

2. Инструкции по технике безопасности

  • Ensure all connections are secure before operating the recliner.
  • Держите детей и домашних животных подальше от движущихся частей кресла.
  • Не позволяйте детям играть с пультом дистанционного управления.
  • Avoid placing hands or feet near the mechanism when operating the chair.
  • Do not sit on the footrest when it is extended.
  • Перед чисткой или техническим обслуживанием отключите кресло от розетки.
  • Do not use the recliner if any part is damaged or malfunctioning. Contact customer support immediately.
  • Maximum weight recommendation: 158.76 kg (350 lbs). Do not exceed this limit.

3. Содержимое упаковки

Перед началом сборки убедитесь в наличии всех компонентов. В комплект обычно входят:

  • спинка
  • База
  • Левый подлокотник
  • Правый подлокотник
  • Подушка для поясницы
  • Адаптер питания и кабели
  • Remote Controls (for recline/lift and massage/heat)
  • Руководство пользователя
Diagram showing recliner components packaged in three boxes

Image 3.1: Illustration of the recliner components and their packaging.

4. Инструкция по сборке

Assembly is designed to be straightforward and typically requires no tools. It can be completed in approximately 20 minutes for a novice.

  1. Attach Armrests to Base: Slide the left and right armrests onto the metal brackets on the chair base. Ensure they are fully seated and locked into place.
  2. Diagram showing how to attach armrests to the chair base

    Image 4.1: Attaching the armrests to the chair base.

  3. Установите спинку: Align the backrest with the receiving brackets on the chair base and slide it down until it clicks securely into position.
  4. Diagram showing how to install the backrest onto the chair base

    Image 4.2: Installing the backrest.

  5. Подключение проводки: Locate the various cables extending from the backrest and base. Connect them according to the color-coded or shape-matched connectors. Ensure all connections are firm.
  6. Diagram illustrating the electrical wire connections for the recliner

    Image 4.3: Electrical wiring connections.

  7. Подключите адаптер питания: Подключите адаптер питания к разъему питания кресла, а затем подключите адаптер к настенной розетке.

5. Инструкция по эксплуатации

Your MCombo M7632 recliner features a triple motor system allowing independent adjustment of the headrest, backrest, and footrest, along with massage and heat functions.

5.1 Recline and Lift Functions

Use the primary remote control to adjust the chair's position. This remote typically has directional arrows for movement and dedicated buttons for specific functions.

Diagram of the primary remote control for the MCombo recliner, showing buttons for power headrest, lift up, lean back, backrest up/down

Image 5.1: Primary remote control for recline and lift functions.

  • Power Headrest: Use the dedicated headrest buttons to tilt the headrest forward or backward for optimal neck support.
  • Backrest and Footrest: The triple motor allows independent adjustment. Use the backrest and footrest controls to find your desired position, from upright to a full lay-flat or zero-gravity position.
  • Diagram showing independent adjustment of footrest, backrest, and headrest

    Image 5.2: Independent adjustment of chair components.

  • Функция лифта: Press the "Lift Up" button to gently raise the chair, assisting you in standing up.
  • Удлинённая подставка для ног: The 4.7-inch extended footrest provides full leg support, preventing feet from dangling.
  • Image showing a person's feet fully supported by the extended footrest

    Image 5.3: Extended footrest for full leg support.

5.2 Функции массажа и тепла

The secondary remote controls the massage and heating features. These functions operate independently of the recline mechanism.

Diagram of the secondary remote control for massage and heat functions, showing buttons for intensity, mode, timer, and specific body zones

Image 5.4: Secondary remote control for massage and heat functions.

  • Dual Heating: Activate heating for the lumbar and seat areas separately using the designated buttons.
  • 8 Vibrating Modes: Select from various massage modes and intensity levels for different body zones (back, lumbar, thigh, leg).
  • Функция таймера: Set a timer for the massage and heat functions to automatically turn off.

5.3 Convenient Features

  • Порты USB и Type-C: Located on the side, these ports allow you to charge your electronic devices.
  • Подстаканники: Two 3.9-inch deep cup holders are integrated into the armrests.
  • Карманы для хранения: Multiple side and front pockets provide convenient storage for remotes, magazines, or other small items.
Image highlighting the USB and Type-C ports, cup holders, and storage pockets on the recliner

Image 5.5: Convenient features including USB ports, cup holders, and pockets.

6. Техническое обслуживание

  • Уборка: Spot clean the fabric upholstery as needed. Use a mild detergent and a damp cloth. Do not saturate the fabric.
  • Инспекция: Regularly inspect all electrical cords and connections for any signs of damage.
  • Перемещение стула: When moving the recliner, ensure it is in the upright, closed position and unplugged. Lift the chair rather than dragging it to prevent damage to the base or flooring.

7. Поиск Неисправностей

  • Председатель не отвечает: Check if the power cord is securely plugged into both the chair and the wall outlet. Ensure the wall outlet is functional. Verify all internal wiring connections are secure (refer to Image 4.3).
  • Массаж/подогрев не работают: Confirm the secondary remote is powered on and its cable is properly connected. Check for any loose connections specific to the massage and heat unit.
  • Необычные шумы: If you hear grinding or unusual noises, discontinue use and inspect the mechanism for any obstructions. Do not attempt to force movement.
  • Прерывистая функциональность: This may indicate a loose connection. Re-check all wiring as per assembly instructions.

If issues persist after troubleshooting, please contact MCombo customer support.

8. Технические характеристики

ОсобенностьДеталь
БрендМКомбо
Название моделиМ7632 (6160-7634)
ЦветКофе
МатериалTextile (Fabric), Foam (Fill)
Размеры продукта (Д x Ш x В)94D x 88.4W x 113H centimetres (37D x 34.8W x 44.5H inches)
Вес товара38.56 кг (85 фунта)
Рекомендация по максимальному весу158.76 кг (350 фунта)
Материал рамыДревесина (сертифицирована FSC)
Особые возможностиAdjustable Backrest, Adjustable Headrest, Cup Holders, Power Lift, Power Recliner, Massage, Heat
Количество положений лежаБесконечная позиция
Рекомендуемая высота5'1"-5'9"
Источник питанияПроводной электрический
Detailed product dimension diagram of the MCombo recliner

Image 8.1: Product dimensions and maximum load capacity.

9. Информация о гарантии

MCombo provides a 2-летняя ограниченная гарантия производителя for this product. This warranty covers:

  • Механизм откидывания спинки и подъема
  • Электрические детали
  • Материал обивки
  • Подушки
  • Деревянный и металлический каркас

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or contact MCombo customer service.

10. Контактная информация

For customer support, technical assistance, or warranty inquiries, please contact MCombo directly:

  • Производитель: МКомбо
  • Контактный адрес: 13515 STREAMSIDE DR LAKE OSWEGO OR 97035-1386 US
  • Webсайт: Магазин MCombo на Amazon

© 2026 MCombo. Все права защищены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.