Procolored F13 Panda DTF Printer User Manual

1. Введение

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.

Figure 1: Procolored F13 Panda DTF Printer.

2. Информация по технике безопасности

Во избежание травм или повреждения принтера всегда соблюдайте следующие меры предосторожности:

• Убедитесь, что принтер установлен на устойчивой ровной поверхности.
• Connect the printer to a grounded power outlet with the correct voltagе (100–230 В переменного тока).
• Не подвергайте принтер воздействию воды или чрезмерной влажности.
• Во время работы держите руки подальше от движущихся частей.
• Use only recommended inks and cleaning solutions.
• Хранить в недоступном для детей месте.

3. Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

• Procolored F13 DTF Printer
• Roll Film 13"
• DTF Ink Set (CMYK+WW)
• Nozzle Protection Fluid
• DTF Powder
• Пластиковая опора
• Кабель для передачи данных (USB)
• Силовой кабель
• Moisturizing Device
• Бутылка для отходов
• Картридж
• Spare Ink Tube
• Роликовый кронштейн
• Подушечка для чернил
• Стеклоочиститель
• Лезвие резака
• USB-ключ
• Шприц
• Отвертка
• Ролик Бар
• Удлинительная трубка
• Needle Hub
• Весна
• Тампон

Figure 2: Included accessories for the Procolored F13 DTF Printer.

4. Руководство по установке

4.1 Распаковка и первоначальное размещение

Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.

4.2 Film Roll Installation

Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.

4.3 Ink System Setup

Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.

Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.

4.4 Подключение питания и установка программного обеспечения

Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.

Рисунок 4: Болееview of the Procolored RIP software interface and available tutorials.

5. Инструкция по эксплуатации

5.1 Подготовка к печати

1. Power on the printer using the main switch.
2. Ensure the DTF film is correctly loaded and aligned.
3. Open the Procolored RIP software on your computer.
4. Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.

5.2 Процесс печати

Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.

5.3 Послепечатная обработка

After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.

Рисунок 5: Examples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.

6. Техническое обслуживание

6.1 Автоматическая система очистки

The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.

6.2 White Ink Circulation

The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.

6.3 Генеральная уборка

Периодически очищайте внешнюю поверхность принтера мягкой тряпкой.amp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.

7. Поиск Неисправностей

Если у вас возникли проблемы с принтером, рассмотрите следующие распространенные решения:

• Проблемы с качеством печати: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
• Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
• Ошибки программного обеспечения: Restart the software and the printer. Ensure your software and drivers are up to date.
• Проблемы с подключением: Verify USB cable connection and ensure the printer is powered on.

For persistent issues, contact Procolored customer service.

8. Технические характеристики

9. Гарантия и поддержка

Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:

• Print Head and Related Components: Six-month warranty.
• Другие аксессуары: Гарантия один год.

Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.