1. Введение
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Varstrom TSDZ16 48V 1000W Torque Sensor Mid Drive Kit. Please read this manual thoroughly before attempting installation or operation to ensure safe and correct usage of the product.
2. Информация по технике безопасности
Always prioritize safety when working with electrical components and bicycles. Failure to follow safety instructions may result in injury or damage to the product.
- Ensure the battery is disconnected before performing any installation, maintenance, or repair work on the motor or wiring.
- При выполнении монтажных работ необходимо использовать соответствующие средства индивидуальной защиты, включая перчатки и защитные очки.
- Убедитесь, что все соединения надежно закреплены и должным образом изолированы, чтобы предотвратить короткие замыкания.
- Do not modify the motor or any electrical components. Unauthorized modifications can lead to malfunction and void the warranty.
- Во время установки не допускайте детей и домашних животных в рабочую зону.
- Регулярно проверяйте все компоненты на предмет износа, повреждений или ослабленных соединений.
- Adhere to local regulations regarding e-bike usage and speed limits.
3. Продукт закончилсяview
The Varstrom TSDZ16 is a 48V 1000W torque sensor mid-drive motor kit designed for converting standard bicycles into electric bikes. It features a 160N.m torque output, IPX6 waterproof rating, and compatibility with 68-73mm bottom brackets.
Основные характеристики:
- High Torque and Power: Delivers 160N.m of torque and 1000W power for effective acceleration and hill climbing.
- Advanced Torque Sensor: Provides a natural and responsive pedaling experience by proportionally adjusting motor assistance based on pedaling force.
- Класс водонепроницаемости IPX6: Equipped with dual oil seals for enhanced protection against water and dust, suitable for various weather conditions.
- Wide Bottom Bracket Compatibility: Supports 68-73mm bottom brackets with an improved mounting design for stability.
- Высокая эффективность: Operates at over 83% efficiency, optimizing battery usage.
- Интегрированная проводка: Includes wiring for a gear shift sensor and connections for front and rear lights.
Components Included (Standard Kit):
- Varstrom TSDZ16 48V 1000W Mid Drive Motor
- Display (DZ40, SW2-M58, or EKD01 - Optional)
- Аккумулятор (дополнительно)
- Brake Lever (Default) or Brake Sensors
- Большой палец газа
- Кривошипы
- 46T Chainwheel with Guard
- Speed Sensor & Magnets
- 1T4 Wiring Harness
- Lock Nuts and Fixed Bracket Accessories
- Гаечный ключ
- Хомуты для кабеля
- Шайбы
4. Настройка и установка
This section outlines the general steps for installing the TSDZ16 mid-drive motor kit onto your bicycle. Ensure your bicycle's bottom bracket is compatible (68-73mm).
Этапы установки:
- Подготовьте велосипед: Remove the existing crankset, bottom bracket, and chain. Clean the bottom bracket shell.
- Установите двигатель: Carefully insert the TSDZ16 motor into the bottom bracket shell. Ensure proper alignment and clearance.
- Надежно закрепите двигатель: Install the fixing nut and bracket to secure the motor to the frame. Tighten the fixing nut to 40Nm.
- Установите датчик скорости: Mount the speed sensor on the chainstay and attach the magnet to a spoke, ensuring a 10-15mm gap between the sensor and magnet.
- Install Cranks and Chainwheel: Attach the crank arms and the 46T chainwheel to the motor spindle.
- Установить цепочку: Reinstall or install a new chain, ensuring it is properly routed and tensioned.
- Подключение проводки: Connect the display, throttle, brake levers/sensors, and optional lights to the main wiring harness (1T4 cable) and then to the motor.
- Установите аккумулятор: Mount the battery securely to the bicycle frame and connect it to the motor's power cable.
- Окончательные проверки: Double-check all connections, ensure no wires are pinched, and test the motor's functionality before riding.
5. Инструкция по эксплуатации
Once installed, operating your Varstrom TSDZ16 kit is straightforward. The system offers pedal assist and, if equipped, a throttle mode.
Операция дисплея:
The specific operation may vary slightly depending on your chosen display (DZ40, SW2-M58, or EKD01). Refer to the individual display manual for detailed instructions.
- Включение/выключение питания: Typically, press and hold the power button on the display to turn the system on or off.
- Уровни помощи: Use the '+' and '-' buttons to cycle through different levels of pedal assistance. Higher levels provide more motor power.
- Информационный дисплей: The display shows real-time information such as current speed, battery level, assist level, and trip distance.
- Помощь при ходьбе: Most displays offer a walk assist mode, activated by holding a specific button, which provides low-speed assistance for pushing the bike.
- Throttle (if installed): The thumb throttle provides on-demand power, independent of pedaling, up to the set speed limit.
Советы по езде:
- Start in a low assist level and gradually increase as needed.
- Shift gears smoothly to optimize motor efficiency and prolong drivetrain life.
- Be aware of your surroundings and ride defensively, as e-bikes can reach higher speeds than traditional bicycles.
6. Техническое обслуживание
Regular maintenance ensures the longevity and optimal performance of your TSDZ16 mid-drive kit.
- Уборка: While the motor is IPX6 waterproof, avoid high-pressure washing directly on electrical components. Clean the motor and battery with a damp ткань.
- Соединения: Periodically check all electrical connections for tightness and corrosion. Ensure they are clean and dry.
- Трансмиссия: Keep your chain, chainwheel, and cassette clean and lubricated. Inspect for wear and replace components as necessary.
- Тормоза: Regularly check brake pads and cables/hydraulic fluid for proper function and wear. Adjust or replace as needed.
- Уход батареи: Store the battery in a cool, dry place. Avoid fully discharging the battery and charge it regularly, even during periods of non-use.
- Проверка двигателя: Listen for unusual noises from the motor. If you detect any, discontinue use and inspect for issues.
7. Поиск Неисправностей
This section addresses common issues you might encounter. For problems not listed here, contact Varstrom customer support.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Двигатель не оказывает помощь. | Battery low or disconnected; Display off; Loose connections; Speed sensor issue; Brake sensor engaged. | Check battery charge and connection; Turn on display; Inspect all wiring connections; Verify speed sensor alignment (10-15mm gap); Ensure brake levers are not engaged. |
| Дисплей не включается | Battery low or disconnected; Loose display cable. | Charge battery; Check battery connection; Ensure display cable is securely plugged in. |
| Необычный шум двигателя | Loose motor mounting; Internal motor issue; Drivetrain component interference. | Check motor mounting bolts for tightness; Inspect chainring for debris; If noise persists, contact support. |
| Неточное измерение скорости | Speed sensor or magnet misaligned or damaged. | Check speed sensor and magnet alignment (10-15mm gap); Ensure magnet is securely attached to spoke. |
8. Технические характеристики
Detailed technical specifications for the Varstrom TSDZ16 Mid Drive Motor Kit.
| Особенность | Спецификация |
|---|---|
| Бренд | Варстром |
| Модель двигателя | ЦДЗ16 |
| Томtage | 48В |
| Номинальная мощность | 1000 Вт |
| Максимальный крутящий момент | 160Нм |
| Максимальная скорость | 55-60KM/H (approx. 34-37 MPH) |
| Тип двигателя | Бесщеточный редукторный двигатель |
| Положение двигателя | Середина Установлена |
| Контроллер | Integrated, inside the Motor |
| Стандарт вала | JIS |
| Рабочая температура | -10-45℃ |
| Датчик педали | Speed and Torque Integrated |
| звездочка | 46Т |
| Масса | 6КГ |
| Эффективность | >83% |
| Уровень шума | ≤60дБ |
| Рейтинг водонепроницаемости | IPX6 |
| Совместимость каретки | 68-73мм |
9. Гарантия и поддержка
Varstrom provides warranty coverage and customer support for its products.
Информация о гарантии:
- Политика возврата: Срок возврата — 30 дней.
- Отремонтировать или заменить: 365 days repair or replacement warranty.
For specific warranty terms, conditions, or to initiate a return or repair, please refer to your purchase documentation or contact Varstrom customer service directly.
Служба поддержки клиентов:
If you have any questions, require technical assistance, or encounter issues not covered in this manual, please contact Varstrom customer support. Provide your product model (TSDZ16) and purchase details for efficient service.