Wefomey COB LED Strip Light (16.4FT) Instruction Manual

Введение

Thank you for choosing the Wefomey COB LED Strip Light. This 16.4ft (5-meter) dimmable LED strip features high-density COB technology with 3100 LEDs, providing a continuous, uniform, and spotless light output. It offers tunable white light from 2700K (warm white) to 6500K (cool white) and can be controlled via an RF remote or the LotusLamp X mobile application. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your LED strip light.

Image: Wefomey COB LED Strip Light providing ambient lighting in a living room.

Что в коробке?

Перед началом установки убедитесь, что все компоненты присутствуют:

• 16.4ft (5m) 24V COB LED Strip Light (2700K-6500K Tunable White)
• RF Remote Control (2*AAA Batteries Not Included)
• Контроллер
• FCC Listed DC 24V 48W Power Supply
• 2-Pin 8mm COB LED Strip Connectors
• Монтажные кронштейны

Информация по безопасности

• Перед установкой или обслуживанием убедитесь, что источник питания отключен.
• Use only the provided 24V power supply or a compatible 24V power supply with sufficient wattage for the total length of the strip light.
• Do not exceed the maximum load of the power supply. If extending the strip beyond 32.8ft, a higher output 24V power supply is required.
• Avoid installing the strip light in wet or damp locations as it is rated for indoor use (IP22).
• Do not bend the strip light sharply or apply excessive force, which may damage the LEDs or internal circuitry.
• Ensure proper ventilation around the power supply during operation to prevent overheating.
• Хранить в недоступном для детей месте.

Настройка и установка

Follow these steps for proper installation of your Wefomey COB LED Strip Light:

1. Подготовка поверхности: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
2. Измерение и резка (необязательно): If a shorter length is required, locate the designated cutting marks (every 42mm / 16.5 inches) on the strip. Cut only at these marked points using sharp scissors.
3. Соедините полосу: Attach the COB LED strip to the controller. Ensure the positive (+) and negative (-) terminals align correctly. The red and black wires at the end of the strip are for connecting to the DC connector, allowing power at both ends for longer installations.
4. Нанесите клей: Peel off the backing from the strong adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, ensuring firm contact along its entire length. For added security, use the included mounting brackets.
5. Подключите питание: Connect the controller to the 24V 48W DC power supply. Plug the power supply into a standard electrical outlet.

Изображение: Бывшийample installation of the LED strip light under kitchen cabinets.

Image: Flexible installation of the LED strip light in a bedroom setting.

Инструкция по эксплуатации

Your Wefomey COB LED Strip Light can be controlled using the included RF remote or the LotusLamp X mobile application.

A. App Control (LotusLamp X)

LotusLamp X app provides comprehensive control over your LED strip light:

1. Загрузите приложение: Искать "LotusLamp X" in your smartphone's app store (iOS or Android) and install it.
2. Сочетание: Ensure Bluetooth is enabled on your phone. Open the app, and it should automatically detect the LED strip controller. Follow the on-screen prompts to pair the device.
3. Регулировка цветовой температуры: Within the app, you can precisely adjust the white light color temperature from 2700K (warm white) to 6500K (cool white).
4. Регулировка яркости: Adjust the brightness from 0% to 100% to suit your preference.
5. Функция таймера: Set schedules for the light to turn on or off automatically at specific times.
6. Групповой контроль: If you have multiple Wefomey LED strip lights, you can group them together for synchronized control.
7. Функция памяти: The light will remember your last used color temperature and brightness settings when powered off and on.

Image: LotusLamp X app interface for controlling color temperature and brightness.

B. RF Remote Control

The RF remote provides convenient control without needing your phone:

• Включение/выключение питания: Нажмите кнопку питания, чтобы включить или выключить свет.
• Регулировка яркости: Use the 'B+' and 'B-' buttons to increase or decrease brightness (10 levels).
• Регулировка цветовой температуры: Use the 'W' button for warmer white and 'C' button for cooler white. Specific Kelvin presets (3000K, 3500K, 4000K, 4500K, 5000K, 6000K) are also available.
• One Hour Timer: Нажмите кнопку «1H», чтобы установить 1-часовой таймер.
• Отмена времени: Press the 'Cancel' button to deactivate any active timer.
• Установка аккумулятора: The remote requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote to insert them, observing polarity.

Image: RF Remote Control layout and functions.

Image: Visual representation of tunable white light from 2700K to 6500K.

DIY and Customization

The Wefomey COB LED Strip Light is designed for flexible customization:

• Гибкость: The strip can be bent at various angles to conform to different surfaces and shapes, making it suitable for creative lighting designs.
• Резка: The strip can be cut at marked intervals (every 42mm / 16.5 inches) to achieve the desired length. Always cut at the designated metal points.
• Повторное подключение: Cut sections of the strip can be reconnected using the provided 2-pin 8mm COB LED strip connectors. Ensure correct polarity (+ to + and - to -) when reconnecting.

Обслуживание

Для обеспечения долговечности и оптимальной работы вашей светодиодной ленты:

• Уборка: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use abrasive cleaners or liquids directly on the strip.
• Проверка связи: Periodically inspect all connections (strip to controller, controller to power supply) to ensure they are secure.
• Источник питания: Ensure the power supply is not covered or placed in an enclosed space where heat can build up.

Поиск неисправностей

Технические характеристики

Image: Detailed specifications and component dimensions.

Гарантия и поддержка

Wefomey products are designed for quality and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Wefomey webсайт. Пожалуйста, сохраните доказательство покупки для гарантийных претензий.