KEMIMOTO 3-IN-1 Front Flip Windshield Instruction Manual

1. Продукт закончилсяview

The KEMIMOTO 3-IN-1 Front Flip Windshield is designed to provide versatile protection and comfort for your Polaris General UTV. Constructed from durable polycarbonate, it offers three operational modes: fully open for maximum airflow, vented for fresh air circulation, and fully closed for complete weather protection.

Основные характеристики:

• Flexible 3-IN-1 Design: Functions as a vented front windshield, a full windshield, or fully open.
• Регулируемая ручка: Allows for easy transition between modes.
• Повышенная прочность: Made from 1/5 inch thick, double-sided hardened PC material, offering superior resistance to shock, shattering, and corrosion. It is 250 times stronger than glass and 25 times stronger than acrylic.
• Отличная видимость: Ensures good light transmission and helps soften UV radiation.
• Снижение шума: Features a pre-installed rubber seal to minimize engine and road noise.
• Улучшенный Clamps: Прочный металлический цокольamps replace plastic alternatives for improved reliability.
• Pre-Installed Rubber Strip: For convenience and a secure seal.

2. Совместимость

This windshield is compatible with the following Polaris General models:

• Polaris General 1000 (2016-2026)
• Polaris General 4 1000 (2016-2026)
• Polaris General XP 1000 (2016-2026)
• Polaris General XP 4 1000 (2016-2026)

3. Что в коробке

Перед началом установки убедитесь, что все компоненты присутствуют:

• 1X Windshield
• 1 Set of Mounting Hardware

4. Инструкция по установке

Follow these steps for proper installation of your KEMIMOTO 3-IN-1 Front Flip Windshield. It is recommended to have a second person assist during certain steps.

1. Подготовьте лобовое стекло: If a protective film is present, carefully remove it from both sides of the windshield.
2. Прикрепить кронштейны: Secure the mounting brackets to the windshield using the provided hardware. Ensure all bolts are hand-tightened initially.
3. Положение ветрового стекла: Carefully place the windshield onto your UTV's frame, aligning the brackets with the designated mounting points.
4. Secure to UTV: Attach the windshield assembly to the UTV frame using the remaining mounting hardware. Adjust the position of the brackets as needed to achieve a proper fit.
5. Окончательная затяжка: Once the windshield is correctly positioned and aligned, securely tighten all bolts. Do not overtighten.

Видеоруководство по установке

Removing Windshield Film Video Guide

5. Инструкция по эксплуатации

The 3-IN-1 design allows for flexible use depending on weather conditions and personal preference.

• Полностью открыто: For maximum airflow and an open-air experience, push the windshield completely forward and secure it in the open position.
• Vented Mode: To allow fresh air circulation while maintaining some protection, adjust the windshield to the vented position using the adjustable handle. This allows cool air to enter the UTV.
• Fully Closed: For complete protection against cold wind, rain, dust, and debris, pull the windshield back to the fully closed position.

Видеоруководство по эксплуатации

6. Техническое обслуживание

Правильный уход продлит срок службы и сохранит прозрачность вашего лобового стекла.

• Регулярная уборка: Gently wipe the windshield surface with a soft, clean cloth and mild soap and water. Avoid abrasive cleaners or brushes that can scratch the polycarbonate material.
• Устойчивые пятна: For more stubborn dirt or mud, soak the cleaning cloth briefly before wiping.
• Осмотр уплотнений: Periodically check the rubber seals for any signs of wear or damage to ensure continued noise reduction and weather protection.

Cleaning Dust Video Guide

Cleaning Mud Video Guide

7. Поиск Неисправностей

If you encounter issues with your flip-up windshield, refer to the following common solutions.

• Difficulty Flipping: Ensure all mounting hardware is correctly aligned and not overtightened. Check for any obstructions in the hinge mechanism.
• Gaps or Loose Fit: Verify that the rubber seals are properly seated and undamaged. Re-check the tightness of all mounting clamps и при необходимости отрегулируйте.
• Чрезмерный шум: Inspect the rubber seal around the perimeter of the windshield for any gaps or damage. Ensure the windshield is fully closed and secured when in the closed position.

Видеоинструкция по устранению неполадок

8. Технические характеристики

9. Информация о гарантии

KEMIMOTO provides a manufacturer warranty for 12 months from the date of purchase. Please retain your proof of purchase for any warranty claims.

10. Поддержка клиентов

For further assistance, technical support, or to inquire about replacement parts, please refer to the contact information provided with your purchase or visit the official KEMIMOTO webсайт.