EC Buying ZK-502H HiFi 50W+50W Bluetooth AmpLifier Board Руководство пользователя

Введение

The EC Buying ZK-502H is a high-fidelity 2.0 stereo digital power amplifier module designed to deliver clear and powerful audio. Featuring the TPA3116D2 chip, this amplifier board provides 50W+50W output and supports multiple audio input sources including Bluetooth 5.0, AUX, and USB. It is equipped with various protection mechanisms to ensure stable and secure performance.

Характеристики продукта

• Высококачественный звук: Delivers 50W+50W output with the TPA3116D2 chip for crystal-clear stereo sound.
• Несколько источников входных данных: Supports Bluetooth 5.0, AUX (3.5mm jack), USB flash drive, and computer USB sound card (plug and play).
• Bluetooth 5.0 Offers seamless wireless connection with a range of over 15 meters in unobstructed environments.
• Надежная защита: Включает оверволtagе, андерволtage, overheating, DC detection, and short circuit protection for enhanced safety and durability.
• Wide Speaker Compatibility: Adaptable to 10-100W, 4-8Ω speakers.
• Гибкий источник питания: Operates with a DC power supply ranging from 9V to 24V.
• Компактный дизайн: Measures 60x60x29mm, making it suitable for various applications and portable setups.

Содержимое упаковки

Пожалуйста, проверьте наличие всех компонентов в упаковке:

• ZK-502H AmpЛифтер Доска
• Top and Bottom Acrylic Plates
• Регулятор громкости
• Радиатор
• Отвертка
• Крепежные элементы (винты, стойки)
• Кабель-адаптер постоянного тока

Image: All components included with the ZK-502H amplifier board, laid out for assembly.

Инструкции по установке

1. Assembly (Optional, if not pre-assembled)

1. Attach the heat sink to the main chip on the ampподъемная доска.
2. Закрепите amplifier board between the two acrylic plates using the provided standoffs and screws.
3. Установите ручку регулировки громкости на вал потенциометра.

2. Подключение питания

• Обеспечить amplifier is switched off and the volume knob is set to minimum.
• Connect a DC power supply (9-24V) to the DC IN port (labeled DC9-24V). Use the provided DC power adapter cable if necessary.
• Важный: Использование более высокого уровня громкостиtage within the specified range (e.g., 24V) is recommended for achieving higher power output.

3. Подключение динамика

• Connect your passive speakers to the speaker output terminals (labeled L+, L-, R+, R-).
• Ensure correct polarity: positive (+) to positive, negative (-) to negative for each channel.
• The amplifier supports speakers with an impedance of 4-8Ω and power rating of 10-100W.

4. Подключение аудиовхода

Выберите один из следующих способов ввода звука:

• Bluetooth: No physical connection needed. Proceed to Operating Instructions for pairing.
• ВСПОМОГАТЕЛЬНЫЙ: Connect an audio source (e.g., smartphone, MP3 player) to the 3.5mm AUX IN jack using an audio cable.
• USB: Insert a USB flash drive into the USB IN port or connect the amplifier to a computer via USB for use as a sound card.

Изображение: сверху view of the ZK-502H amplifier board, highlighting the AUX IN, Bluetooth, USB IN, DC IN, and speaker output terminals.

Инструкция по эксплуатации

1. Включение/выключение питания

• Press the ON/OFF button to power on the ampусилитель. Загорится синий индикатор.
• Press the ON/OFF button again to power off the ampпожизненнее.

2. Регулятор громкости

• Rotate the large silver knob clockwise to increase volume.
• Rotate the large silver knob counter-clockwise to decrease volume.

3. Выбор режима ввода

The amplifier automatically detects the input source. If multiple sources are connected, it will prioritize them or switch based on activity.

• Режим Bluetooth: При включении amplifier will enter Bluetooth pairing mode. A voice prompt will confirm "Bluetooth Mode".
• Режим AUX: If an AUX cable is connected and playing audio, the amplifier will switch to AUX input.
• Режим USB: If a USB flash drive is inserted or connected to a computer, the amplifier will switch to USB input.

4. Сопряжение по Bluetooth

1. Обеспечить amplifier is powered on and in Bluetooth mode (indicated by a voice prompt).
2. On your audio device (e.g., smartphone, tablet), enable Bluetooth and search for available devices.
3. Select "ZK-502H" from the list of devices to pair.
4. Once paired, a voice prompt will confirm the connection. You can now play audio from your device.

Технические характеристики

Power Output Table:

Обслуживание

• Держите ampПлата усилителя должна быть чистой и свободной от пыли. Для очистки используйте мягкую сухую ткань.
• Избегайте воздействия на устройство влаги, экстремальных температур или прямых солнечных лучей.
• Ensure proper ventilation to prevent overheating, especially during prolonged use at high volumes.
• Не пытайтесь разбирать или модифицировать amplifier beyond the initial assembly steps, as this may void any potential warranty and could cause damage.

Поиск неисправностей

Гарантия и поддержка

For product support, technical assistance, or warranty inquiries, please contact EC Buying customer service through the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.

Производитель: Покупка ЕС

Модель: ZK-502H