YPMart 3000W Electric Instant Hot Water Faucet

Введение

Thank you for choosing the YPMart 3000W Electric Instant Hot Water Faucet. This manual provides essential information for the safe installation, operation, and maintenance of your new appliance. Please read these instructions thoroughly before installation and retain them for future reference.

Важная информация по безопасности

• Данный прибор предназначен только для бытового использования.
• Убедитесь, что источник питания vol.tage соответствует номинальному объемуtage of the appliance (220-240V).
• Installation must be performed by a qualified electrician or plumber in accordance with local regulations.
• Не используйте кран, если шнур питания или вилка повреждены.
• Не погружайте прибор в воду или другие жидкости.
• Always ensure water flows through the faucet before turning on the power to prevent dry burning.
• Не подпускайте детей к прибору во время работы.
• The faucet water inlet method is the lower water inlet, and the interface diameter is 1/4 inch.
• The water faucet can only be installed upright.
• Required operating water pressure is 0.04-0.6 MPa.

Содержимое упаковки

Убедитесь, что все компоненты присутствуют и не повреждены:

• 1 x Instant Hot Water Faucet
• 1 х Руководство пользователя
• 1 Bag Assembly Accessories

Технические характеристики продукта

Настройка и установка

Before beginning installation, ensure the main power supply is turned off. This faucet is designed for a lower water inlet connection and must be installed upright.

1. Проверки перед установкой

• Confirm your water pressure is within the required range of 0.04-0.6 MPa.
• Ensure the installation surface is stable and can support the faucet.
• Verify the water inlet pipe diameter is 1/4 inch.

2. Установка смесителя

1. Insert the faucet into the mounting hole on your sink or countertop.
2. Secure the faucet from underneath using the provided assembly accessories (washer, nut). Ensure it is firmly tightened and stable.

3. Подключение воды

1. Connect the water inlet pipe to the lower inlet of the faucet. Ensure a watertight seal using appropriate plumbing tape or sealant.
2. Connect the other end of the water inlet pipe to your cold water supply.
3. Once connected, slowly open the main water supply valve and check for any leaks.

4. Электрическое подключение

1. Connect the power cord to a grounded 220-240V, 50Hz electrical outlet.
2. Ensure the circuit is capable of handling a 3000W load. A dedicated circuit is recommended.

Рисунок 1: Болееview of the YPMart Instant Hot Water Faucet.

Figure 2: Internal design highlighting water-electricity isolation for safety.

Инструкция по эксплуатации

This faucet features a single lever design for controlling both water flow and temperature, along with a digital display for precise temperature monitoring.

1. Первоначальное использование

1. Before plugging in the faucet or turning on the power, open the cold water handle and let water flow through the faucet for at least 30 seconds to ensure the heating chamber is filled.
2. Plug in the faucet or turn on the power supply. The digital display will illuminate.

2. Регулирование расхода и температуры воды

• Холодная вода: Move the lever to the cold water position (typically to the right or indicated by a blue marker). Water will flow without heating.
• Горячая вода: Move the lever to the hot water position (typically to the left or indicated by a red marker). The 3000W heating element will activate, providing instant hot water. The digital display will show the current water temperature.
• Adjust the lever position between cold and hot to achieve the desired water temperature.
• Adjust the lever's vertical position to control water flow intensity.

Figure 3: Single lever control for hot and cold water selection.

Figure 4: Digital display showing real-time water temperature.

Обслуживание

Regular maintenance ensures optimal performance and longevity of your faucet.

• Уборка: Clean the exterior of the faucet with a soft, damp Используйте ткань и мягкое моющее средство. Избегайте абразивных чистящих средств или растворителей, которые могут повредить покрытие.
• Очистка аэратора: Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris. Rinse thoroughly and reattach.
• Удаление накипи: In areas with hard water, mineral buildup (limescale) may occur. If water flow decreases or heating efficiency reduces, consult a qualified plumber for descaling procedures. Do not attempt to disassemble the heating element yourself.
• Подготовка к зиме (если применимо): If the faucet is installed in an area prone to freezing temperatures, ensure the water supply is drained to prevent damage from freezing.

Поиск неисправностей

Если у вас возникли проблемы с краном, ознакомьтесь со следующими распространенными проблемами и решениями:

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact customer support or a qualified service professional.