Руководство пользователя настенного 15-канального пульта дистанционного управления Eclipse DC1653

Продукт болееview

The Eclipse DC1653 is a 15-channel wall-mounted radio remote control designed for convenient and flexible operation of electric full cassette awnings, blinds, and roller shutter motors, particularly those from Dooya. This device allows for smart control directly from your wall, eliminating the need for a handheld remote.

With its 15 channels, the DC1653 provides comprehensive control over multiple shading systems or sensors, ensuring you maintain full oversight and ease of use. It is an ideal solution for modern outdoor living spaces that prioritize smart comfort and reliable automation.

Изображение: Спереди view of the Eclipse DC1653 wall-mounted remote control, showing its clean white finish and button layout.

Изображение: под углом view of the Eclipse DC1653 wall-mounted remote control, highlighting its slim profile and integrated display.

Основные характеристики

• Несколько каналов: Features a 15-channel remote control for managing various devices.
• Источник питания: Powered by a CR2450 3 VDC button cell battery.
• Технические данные: Operates on a frequency of 433.05 - 434.79 MHz.
• Безопасность: Designed for an operating temperature range of -0°C to 50°C.
• Рабочий диапазон: Offers a range of 200 meters outdoors and 35 meters through 2 walls.

Настройка и установка

The Eclipse DC1653 wall-mounted remote control requires assembly and proper mounting for optimal performance. It is designed for direct wall installation.

1. Распаковка и осмотр

Carefully unpack all components. Verify that all parts are present and undamaged. Refer to the packaging for a complete list of contents.

2. Установка аккумулятора

1. Найдите батарейный отсек на задней панели устройства.
2. Откройте крышку отсека.
3. Insert one CR2450 3 VDC button cell battery, ensuring correct polarity (+/-).
4. Плотно закройте крышку батарейного отсека.

3. Настенный монтаж

Choose a suitable location on a wall, ideally near the awning or roller shutter it will control, and within the effective range. Ensure the surface is clean and dry.

1. Отметьте на стене желаемое место крепления.
2. Use the provided mounting hardware (screws, wall plugs) to secure the mounting plate to the wall.
3. Attach the DC1653 unit to the mounted plate, ensuring it clicks securely into place.

Image: The Eclipse DC1653 wall-mounted remote control shown installed on an exterior wall, demonstrating its discreet integration into a home's facade.

Инструкция по эксплуатации

The DC1653 remote control allows for easy operation of your connected Dooya awning or roller shutter systems. Familiarize yourself with the button functions.

Функции кнопок

• Channel Selection (+/- buttons): Use the '+' and '-' buttons to cycle through the 15 available channels. The current channel number will be displayed on the screen.
• Up/Open (Up arrow button): Press to extend the awning or open the roller shutter.
• Stop (Circle button): Press to stop the awning or roller shutter at its current position.
• Down/Close (Down arrow button): Press to retract the awning or close the roller shutter.
• Programming Button (Small button, usually recessed): Used for pairing the remote with your Dooya motor. Refer to your motor's manual for specific pairing instructions.

Pairing with Dooya Motors

To control your awning or roller shutter, the DC1653 must be paired with the corresponding Dooya motor. The exact pairing procedure may vary slightly depending on your specific motor model. Generally, the process involves:

1. Убедитесь, что двигатель Dooya включен.
2. Locate the programming button on your Dooya motor (often a small button on the motor head or receiver).
3. Press and hold the programming button on the motor until it enters pairing mode (e.g., a light flashes or the motor jogs slightly).
4. Within a few seconds, press the programming button on the DC1653 wall remote.
5. The motor should respond (e.g., jog again) to confirm successful pairing.
6. Test the Up, Stop, and Down functions to ensure proper control.

Примечание: For detailed pairing instructions, always consult the user manual provided with your specific Dooya motor.

Обслуживание

The Eclipse DC1653 wall-mounted remote control requires minimal maintenance to ensure long-term performance.

Уборка

• Wipe the surface of the remote control with a soft, dry, or slightly damp ткань.
• Не используйте абразивные чистящие средства, растворители или едкие химикаты, так как они могут повредить отделку или внутренние компоненты.
• Убедитесь, что жидкость не попала в устройство.

Замена батареи

When the display dims or the remote's range decreases, it's time to replace the battery.

1. Откройте батарейный отсек на задней панели устройства.
2. Remove the old CR2450 3 VDC button cell battery.
3. Insert a new CR2450 3 VDC battery, observing correct polarity.
4. Надежно закройте отсек.
5. Утилизируйте старую батарею в соответствии с местными правилами.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

Информация о гарантии

Specific warranty details for the Eclipse DC1653 wall-mounted remote control are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims.

For information regarding returns or replacements, please refer to the seller's return policy. The current seller, Four & More GmbH, offers a 30-day refund/replacement policy.

Поддержка клиентов

For technical assistance, troubleshooting beyond this manual, or inquiries about your Eclipse product, please contact the manufacturer or your retailer. You can often find contact information on the product packaging or the brand's official webсайт.

As this product is from a small or medium-sized business in Germany, Austria, or Switzerland, support may be available directly through their Amazon brand presence or dedicated customer service channels.

Посетите Eclipse Store on Amazon для получения более подробной информации.