Руководство пользователя блока управления Canbus для Android QSZN Hiworld FDF2 с 16 контактами и адаптера жгута проводов.

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of the QSZN Hiworld FDF2 16-PIN Android Canbus Box and Wiring Harness Adaptor. This product is designed to integrate an aftermarket Android car radio with your vehicle's existing electrical system, enabling functions such as steering wheel controls, door status, and other vehicle data communication through the Canbus protocol.

Совместимые транспортные средства:

• Форд Рейнджер
• Форд Фокус
• Форд Эдж
• Ford Kuga
• Ford Everest

2. Содержимое упаковки

Пожалуйста, убедитесь, что в вашей посылке присутствуют все перечисленные ниже предметы:

• 1 x QSZN Hiworld FDF2 Canbus Box
• 1 x 16-PIN Wiring Harness Adaptor

Image 2.1: The QSZN Hiworld FDF2 Canbus Box and its accompanying wiring harness adaptor.

3. Настройка и установка

Installation of the Canbus box and wiring harness requires basic knowledge of car audio wiring. If you are unsure, it is recommended to seek professional assistance.

3.1. Меры предосторожности

• Перед началом любых электромонтажных работ всегда отсоединяйте отрицательную клемму аккумуляторной батареи автомобиля, чтобы предотвратить короткое замыкание и повреждения.
• Убедитесь, что зажигание автомобиля выключено.
• Используйте соответствующие инструменты и надевайте защитное снаряжение.

3.2. Этапы установки

1. Remove Existing Car Radio: Carefully remove your vehicle's factory car radio or existing aftermarket unit. Refer to your vehicle's service manual for specific instructions on dash disassembly.
2. Определите проводку автомобиля: Locate the vehicle's factory wiring harness connector. This is where the new adaptor will connect.
3. Connect Wiring Harness Adaptor: Connect the vehicle-specific end of the QSZN 16-PIN Wiring Harness Adaptor to your vehicle's factory wiring harness. Ensure a secure and snug fit.


Image 3.1: Close-up of the QSZN wiring harness connectors, showing the various pins for connection.

4. Подключите блок Canbus: Locate the dedicated connector on the wiring harness adaptor designed for the Canbus box. Plug the QSZN Hiworld FDF2 Canbus Box into this connector. Ensure the connection is firm.


Изображение 3.2: вид сбоку view of the QSZN Hiworld FDF2 Canbus Box, illustrating the specific port for harness connection.



Image 3.3: The QSZN Hiworld FDF2 Canbus Box, displaying its identification label and QR code for product information or support. The QR code links to Поддержка WhatsApp.

5. Подключение к головному устройству Android: Connect the remaining end of the 16-PIN Wiring Harness Adaptor to the corresponding port on your aftermarket Android car radio.
6. Безопасная проводка: Route all cables neatly and securely to prevent pinching or interference. Ensure the Canbus box is placed in a location where it will not be damaged or interfere with other components.
7. Тестовая функциональность: Reconnect the vehicle's negative battery terminal. Turn on the ignition and test the Android car radio. Verify that steering wheel controls, reverse camera input (if applicable), and other vehicle-specific functions are working correctly.
8. Соберите Дэш заново: Once all functions are confirmed, carefully reassemble the vehicle's dashboard components.

4. Инструкция по эксплуатации

The QSZN Hiworld FDF2 Canbus Box operates automatically once correctly installed. Its primary function is to translate vehicle data (such as ignition status, speed, reverse gear, handbrake, and steering wheel control signals) into a format that your aftermarket Android car radio can understand and utilize.

• Органы управления на рулевом колесе: After installation, your Android head unit should automatically detect and allow configuration of your vehicle's steering wheel controls. Refer to your Android head unit's manual for specific instructions on mapping these controls.
• Информация об автомобиле: Depending on your Android head unit's capabilities, the Canbus box may enable the display of certain vehicle information (e.g., door open warnings, climate control status) on the head unit screen.

5. Техническое обслуживание

The QSZN Hiworld FDF2 Canbus Box is a sealed electronic component and requires minimal maintenance.

• Целостность соединения: Periodically check that all wiring connections remain secure and free from corrosion.
• Охрана окружающей среды: Ensure the Canbus box is installed in a dry location, away from direct moisture and extreme temperatures.
• Уборка: If necessary, gently wipe the exterior of the Canbus box with a dry, soft cloth. Do not use liquid cleaners or solvents.

6. Поиск Неисправностей

If you encounter issues after installation, perform the following basic troubleshooting steps:

• Отсутствует питание головного устройства:
  • Проверьте все силовые соединения от автомобиля к жгуту проводов и к головному устройству.
  • Verify vehicle fuses related to the car radio.
• Управление на рулевом колесе не работает:
  • Ensure the Canbus box is securely connected to the wiring harness.
  • Check the settings within your Android head unit for steering wheel control configuration. Some head units require manual learning or selection of the correct Canbus protocol.
• Некорректное отображение данных об автомобиле:
  • Confirm the Canbus box is the correct model for your specific vehicle and year.
  • Check for firmware updates for your Android head unit, as these can sometimes improve Canbus compatibility.
• Прерывистая функциональность:
  • Проверьте все соединения на наличие ослабленных креплений или повреждений.
  • Ensure no wires are pinched or shorting.

Если проблемы не исчезнут, обратитесь в службу поддержки клиентов для получения дополнительной помощи.

7. Технические характеристики

8. Информация о гарантии

Specific warranty terms and conditions for the QSZN Hiworld FDF2 Canbus Box are provided by the seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty coverage, duration, and procedures, please contact your original point of sale.

9 Поддержка

For technical assistance, installation queries, or troubleshooting support, please contact our customer service team. You can reach us via the following methods:

• Поддержка WhatsApp: Scan the QR code on the product packaging or Canbus box, or click this link: Поддержка WhatsApp