ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. Введение

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

Изображение: Оверview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Особенности продукта

Управление без помощи рук: Automatically detects presence and ambient light to activate or deactivate lights.
Параметры настройки: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
Универсальная совместимость: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
Простая установка: Fits standard junction boxes and requires a neutral wire.
Прочная конструкция: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

Изображение: подробное view of the product features and adjustable settings on the dimmer switch.

3. Информация по технике безопасности

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

Это устройство предназначено для установки в соответствии с Национальными правилами по эксплуатации электрооборудования и местными нормативами.
Рекомендуется, чтобы эту установку выполнял квалифицированный электрик.
Используйте только медные провода.
Для корректной работы необходим нейтральный провод.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Содержимое упаковки

ECOELER Motion Sensor Dimmer Switch
Настенная пластина
Инструкции по установке (настоящее руководство)
Крепежные винты
Колпачки для проводки

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Image: Product dimensions and included accessories.

5. Технические характеристики

Атрибут	Ценить
Номер модели	YM2601-WH
Рабочий объемtage	120 вольт (переменный ток)
Текущий рейтинг	10 Amps
Макс Ватtage (Диммируемые светодиодные/люминесцентные лампы)	150 Вт
Макс Ватtage (Лампы накаливания/Галогенные лампы)	300 Вт
Тип переключателя	Однополюсный (1-сторонний)
Тип крепления	Настенное крепление
Материал	Copper, Metal, Polycarbonate
Размеры (Д x Ш x В)	6.86 х 4.2 х 11.48 см
Сертификаты	ЭТЛ, ФКС

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattagе рейтинги.

Image: Universal compatibility with various bulb types and their wattagе рейтинги.

6. Установка

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Предварительная установка

Выключите питание: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltagе тестер.
Удалить старый переключатель: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
Определите провода: Identify the following wires in your electrical box:
- Hot (Line) Wire: Подаёт питание от автоматического выключателя.
- Провод нагрузки: Подключается к светильнику.
- Нейтральный провод: (Required) Typically white, often capped together with other neutral wires.
- Заземляющий провод: (Recommended) Typically bare copper or green.

6.2 Инструкции по подключению

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

Подключите Черный wire from the switch to the Горячая (линия) провод от стены.
Подключите Красный wire from the switch to the Нагрузка провод от стены.
Подключите Белый wire from the switch to the Нейтральный провод от стены.
Подключите Зеленый wire from the switch to the Земля провод от стены.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Монтаж и отделка

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
Прикрепите настенную пластину.
Снова включите питание с помощью автоматического выключателя.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. Инструкция по эксплуатации

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

Режим присутствия (автоматическое включение, автоматическое выключение): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
Режим отсутствия (включено вручную, выключено автоматически): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 Настройка параметров

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

Задержка по времени: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
Чувствительность: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 Функция диммирования

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. Поиск Неисправностей

Свет не включается:
- Ensure power is ON at the circuit breaker.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- Проверьте общий объем воды.tage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. Техническое обслуживание

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

Уборка: Wipe the switch and wall plate with a soft, damp Ткань. Не используйте абразивные чистящие средства или растворители.
Избегайте препятствий: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
Регулярные проверки: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. Гарантия и поддержка

The ECOELER Motion Sensor Dimmer Switch comes with a Гарантия 1 год, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

Производитель: ECOELER ELECTRIC INC

Контакт: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.