1. Введение
Thank you for choosing the VEVOR VBPYCE-110 Variable Frequency Pool Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pool heat pump. Please read this manual thoroughly before installation and use, and retain it for future reference.
The VBPYCE-110 is designed to provide both heating and cooling for swimming pools ranging from 25 m³ to 50 m³, ensuring comfortable water temperatures year-round. Its variable frequency technology offers energy efficiency and quiet operation.
2. Инструкции по технике безопасности
ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к поражению электрическим током, пожару, серьезным травмам или смерти.
- Ensure the unit is installed by a qualified technician in accordance with all local and national electrical and plumbing codes.
- Перед выполнением любых работ по техническому обслуживанию или ремонту всегда отключайте питание устройства.
- Do not operate the unit if any part is damaged or missing.
- Во время работы устройства не допускайте детей и посторонних лиц к нему.
- Do not block the air intake or exhaust vents of the heat pump.
- Устройство должно быть надлежащим образом заземлено.
- Do not use flammable liquids or gases near the heat pump.
3. Компоненты продукта
The VEVOR VBPYCE-110 heat pump consists of several key components designed for efficient performance and durability.
Рисунок 3.1: Схема внутренних компонентов
This diagram illustrates the main internal components of the heat pump, including the evaporator, all-pure copper piping, floating compressor base, and main control panel. These elements work together to ensure efficient heat transfer and quiet operation.
- Испаритель: Designed for efficient heat absorption, contributing to power savings.
- All-Pure Copper Piping: Ensures rapid heating and excellent thermal conductivity.
- Floating Compressor Base: Снижает вибрацию и шум во время работы.
- Основная панель управления: Provides easy access for operation and settings adjustment.
- Titanium Tube Heat Exchanger: Highly resistant to salt, chlorine, and corrosion, ensuring long-term durability.
4. Установка
Proper installation is crucial for the performance and longevity of your heat pump. Consult a qualified professional for installation.
4.1 Выбор места
- Choose a location with adequate airflow, away from obstructions.
- Убедитесь, что устройство установлено на устойчивой, ровной поверхности.
- Maintain sufficient clearance around the unit for maintenance and proper air circulation (refer to specifications for exact distances).
- The unit can be installed for both above-ground and in-ground pools.
Рисунок 4.1: Пример установкиampле
The heat pump can be integrated with various pool types, including above-ground and in-ground installations, provided proper clearances and connections are maintained.
4.2 Сантехнические соединения
- Подключите тепловой насос к системе фильтрации бассейна после фильтра и перед дозаторами химических реагентов.
- Use the provided universal metric-imperial connector kit for secure connections.
- Убедитесь, что все соединения герметичны, чтобы предотвратить протечки.
4.3 Электрические соединения
- The unit requires an AC 220-240V, 50Hz power supply.
- All electrical wiring must comply with local codes and be performed by a licensed electrician.
- Install a dedicated circuit breaker for the heat pump.
- Обеспечьте правильное заземление во избежание опасности поражения электрическим током.
5. Инструкция по эксплуатации
The VBPYCE-110 heat pump features a user-friendly control panel for setting desired temperatures and operating modes.
Figure 5.1: Temperature Control Range
The heat pump maintains minimal water temperature fluctuations, enhancing swimming comfort. The heating temperature range is 9-40°C (48.2-104°F).
Рисунок 5.2: Тихая работа
Equipped with inverter technology, the heat pump operates at a noise level below 58 dB at 1 meter, ensuring minimal disruption.
5.1 Панель управления оконченаview
Рис. 5.3. Расположение панели управления.
The main control panel is located on the side of the unit, providing access to various settings and operational data. It supports RS485 connection for integration with a control center.
The main control panel typically includes:
- Кнопка питания: Для включения/выключения устройства.
- Выбор режима: To switch between heating, cooling, and automatic modes.
- Регулировка температуры: Up/Down arrows to set the desired water temperature.
- Экран дисплея: Shows current water temperature, set temperature, and operating status.
5.2 Установка желаемой температуры
- Turn on the heat pump using the power button.
- Select the desired operating mode (heating or cooling).
- Use the temperature adjustment buttons to set your preferred pool water temperature. The unit will automatically work to reach and maintain this temperature.
The heating temperature range is 9-40°C (48.2-104°F), and the cooling temperature range is 8-28°C (46.4-82.4°F).
6. Техническое обслуживание
Regular maintenance ensures optimal performance and extends the lifespan of your VEVOR heat pump.
6.1 Регулярные проверки
- Clean the Coils: Periodically inspect and clean the evaporator coils to remove dirt, leaves, and debris that can obstruct airflow.
- Проверьте поток воды: Ensure there is adequate water flow through the heat pump. Reduced flow can impact efficiency.
- Проверьте на наличие утечек: Regularly check all plumbing connections for any signs of leaks.
- Убрать препятствия: Ensure the area around the heat pump is free from obstructions to allow for proper air circulation.
Рисунок 6.1: Характеристики долговечности
The heat pump features a spiral titanium tube heat exchanger and all-pure copper piping, providing excellent resistance to salt, chlorine, and corrosion, which contributes to its long-term durability and reduced maintenance needs.
6.2 Подготовка к зиме
If you live in an area where temperatures drop below freezing, it is essential to winterize your heat pump to prevent damage:
- Отключите питание устройства.
- Drain all water from the heat pump and plumbing lines to prevent freezing.
- Cover the unit with a protective, breathable cover.
7. Поиск Неисправностей
This section provides solutions to common issues you might encounter with your VEVOR pool heat pump. For problems not listed here, contact customer support.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Тепловой насос не включается. | Отсутствие электропитания; сработал автоматический выключатель; неисправная проводка. | Check power connection and circuit breaker. Consult an electrician if wiring is suspected. |
| Недостаточное отопление/охлаждение. | Low water flow; dirty coils; incorrect temperature setting; ambient temperature too low/high. | Ensure pump is running and filter is clean. Clean evaporator coils. Verify temperature settings. Check operating environment temperature limits. |
| Блок шумный. | Loose components; fan obstruction; unit not level. | Check for loose parts. Clear any obstructions from the fan. Ensure the unit is on a level surface. |
| Утечка воды. | Loose plumbing connections; damaged O-rings or seals. | Tighten all plumbing connections. Inspect and replace any damaged seals. |
8. Технические характеристики
Detailed technical specifications for the VEVOR VBPYCE-110 Variable Frequency Pool Heat Pump.
Рисунок 8.1: Размеры изделия и входящие в комплект аксессуары.
This image provides a visual representation of the heat pump's dimensions and lists the accessories included with the unit.
| Особенность | Деталь |
|---|---|
| Номер модели | VBPYCE-110 |
| Максимальная входная мощность | 2.81 кВт |
| Номинальная мощность нагрева | 2.51 - 11.38 кВт |
| Диапазон температур нагрева | 9 - 40°C (48.2 - 104°F) |
| Диапазон температур охлаждения | 8 - 28°C (46.4 - 82.4°F) |
| Рекомендуемый размер бассейна | 25 - 50 м³ |
| Температура рабочей среды | от -10 до 40°C (от 14 до 104°F) |
| Источник питания | 220-240 В переменного тока, 50 Гц |
| Уровень шума | < 58 dB (at 1m) |
| Вес нетто | 48.5 кг (107.0 фунта) |
| Размеры продукта (Д x Ш x В) | 91 x 36 x 62 см (35.7 x 14.2 x 24.5 дюймов) |
| Основной материал | Углеродистая сталь |
8.2 Принадлежности в комплекте
- 1 х Руководство пользователя
- 4 x Shock-absorbing Pads
- 2 x Drain Nozzle
- 1 x 2m Drain Hose
- 2 x Universal Metric-Imperial Connector Kit
9. Гарантия и поддержка
Для получения информации о гарантии и технической поддержке, пожалуйста, обратитесь к гарантийному талону, прилагаемому к вашему изделию, или посетите официальный сайт VEVOR. webСохраните чек в качестве подтверждения покупки.
For assistance, contact VEVOR customer service with your model number (VBPYCE-110) and purchase details.