Руководство пользователя одномерного лазерного сканера штрих-кодов Symcode MJ-X1L с Bluetooth

1. Введение

This manual provides comprehensive instructions for the Symcode MJ-X1L Bluetooth 1D Laser Barcode Scanner. Please read this manual carefully before using the device to ensure proper operation and to maximize its performance and lifespan.

2. Особенности продукта

• Integrated 1.5-inch LCD screen for displaying scanning time, connection status, battery level, barcode data, and total scan count.
• Convenient clip-on and magnetic suction design for versatile attachment.
• Multiple connectivity options: Bluetooth, 2.4G Wireless (with USB dongle), and USB Wired.
• Supports instant upload and offline storage modes.
• Configurable settings via screen menu, including time stamp, prefix/suffix, and sound/vibration control.
• Long standby time with a built-in 2000 mAh battery.
• Capable of decoding most 1D barcodes, including Febraban Bank Code, Codabar, Code 11, Code93, MSI, Code 128, EAN-128, Code 39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 25, Interleaved 25, Standard 25, Matrix.
• Effective scanning of damaged, fuzzy, reflective, and smudged barcodes.

3. Содержимое упаковки

Пожалуйста, проверьте комплектность товара при получении. Если какие-либо предметы отсутствуют или повреждены, обратитесь к продавцу.

• Symcode MJ-X1L Barcode Scanner
• Зарядный кабель USB-C
• USB Wireless Dongle (for 2.4G connection)
• Ремешок на запястье
• Руководство пользователя (этот документ)

4. Настройка

4.1 Первоначальная зарядка

Before first use, fully charge the scanner using the provided USB-C cable. Connect the USB-C end to the scanner and the USB-A end to a power adapter or computer USB port. The battery level indicator on the screen will show charging status.

4.2 Включение/выключение питания

To power on the scanner, press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates. To power off, press and hold the power button until the screen turns off.

4.3 Удаление защитной пленки

A protective film is applied to the display screen. For optimal clarity, gently peel off this film before use.

Рисунок 4.3.1: Illustration of removing the protective film from the scanner's display.

5. Инструкция по эксплуатации

5.1 Базовое сканирование

To scan a barcode, point the scanner's laser window at the barcode and press the "SCAN" button. The scanner will emit a laser line and a confirmation sound/vibration (if enabled) upon successful scan. The scanned data will appear on the display.

5.2 Режимы сканирования

Сканер поддерживает три основных режима сканирования:

• Режим ключевого триггера: Press the SCAN button for each barcode scan.
• Режим непрерывного сканирования: The scanner continuously emits the laser and scans barcodes without needing to press the button for each scan.
• Автоматический режим определения местоположения: The scanner activates the laser and scans when a barcode is detected within its field of view.

Refer to the included quick start guide or the full manual (if available from the manufacturer) for specific barcodes to switch between these modes.

Рисунок 5.2.1: Надview of the three available scanning modes.

5.3 Режимы загрузки данных

The scanner offers two data transmission modes:

• Режим мгновенной загрузки: Данные штрихкода передаются на подключенное устройство немедленно после каждого сканирования.
• Автономный режим хранения: Barcode data is stored internally in the scanner's memory (up to 50,000 barcodes) and can be uploaded later to a connected device.

To switch between these modes, press buttons 1 and 2 simultaneously. Consult the product's configuration guide for detailed instructions on managing stored data.

Рисунок 5.3.1: Instant Upload Mode vs. Offline Storage Mode.

6. Связь

The Symcode MJ-X1L scanner supports three connection methods:

6.1 Bluetooth-соединение

Для подключения через Bluetooth:

1. Ensure the scanner is in Bluetooth pairing mode (usually by scanning a specific barcode in the manual).
2. На вашем хост-устройстве (смартфоне, планшете, ПК) включите Bluetooth и выполните поиск доступных устройств.
3. Select "Symcode Scanner" or a similar name from the list to pair.
4. Once paired, the scanner's display will indicate a successful Bluetooth connection.

Bluetooth wireless range is approximately 15m (49ft) in a barrier environment and 50m (164ft) in a barrier-free environment.

6.2 Беспроводное соединение 2.4G

Для подключения через беспроводную сеть 2.4G:

1. Plug the provided USB wireless dongle into an available USB port on your computer.
2. Ensure the scanner is in 2.4G wireless mode (usually by scanning a specific barcode in the manual).
3. The scanner and dongle should automatically pair. The scanner's display will indicate a successful 2.4G connection.

2.4G wireless range is approximately 30m (98ft) in a barrier environment and 150m (492ft) in a barrier-free environment.

6.3 Проводное USB-подключение

Для подключения через USB-кабель:

1. Подключите сканер к компьютеру с помощью кабеля USB-C.
2. The scanner will function as a wired device, and data will be transmitted directly. This mode also charges the device.

Рисунок 6.3.1: Wireless Connectivity Ranges.

7. Display Screen Management

The 1.5-inch LCD screen provides real-time information and configuration options:

• Время сканирования: Отображает текущее время.
• Состояние подключения: Indicates whether the scanner is connected via Bluetooth, 2.4GHz wireless, or USB wired.
• Уровень заряда батареи: Показывает оставшийся заряд батареи.
• Данные штрихкода: Displays the last scanned barcode.
• Stored Data Amount: Shows the number of barcodes stored in offline mode.
• Total Scanning Amount: Tracks the total number of scans.

Advanced configurations, such as displaying goods names and prices, require uploading specific information to the scanner using a dedicated tool. Contact Symcode support for assistance with this feature.

8. Управление аккумулятором и питанием

The scanner is equipped with a 2000 mAh Lithium Polymer battery. A full charge provides approximately 30 days of standby time and 5-7 days of frequent use. The display screen includes a battery level indicator. Charge the device when the battery level is low to ensure uninterrupted operation.

The separate physical switch button helps reduce power loss when the device is not in use.

9. Техническое обслуживание

• Уборка: Use a soft, dry cloth to clean the scanner's exterior. For the scanning window and display, use a soft, lint-free cloth lightly dampened with water or a mild screen cleaner. Avoid abrasive materials or harsh chemicals.
• Хранилище: Храните сканер в прохладном, сухом месте, защищенном от прямых солнечных лучей и экстремальных температур.
• Уход батареи: For long-term storage, charge the battery to about 50% to prolong its lifespan. Avoid fully discharging the battery for extended periods.

10. Поиск Неисправностей

10.1 Scanner Not Powering On

Ensure the battery is charged. Connect the scanner to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.

10.2 Невозможно отсканировать штрихкоды

• Verify the scanner is powered on and the laser is active when the scan button is pressed.
• Убедитесь, что штрихкод чистый, неповрежденный и находится в пределах диапазона считывания и угла наклона сканера.
• Check if the correct scanning mode is selected (Key Trigger, Continuous, or Automatic Sensing).
• Confirm the barcode type is supported (this is a 1D scanner).

10.3 Connection Issues (Bluetooth/2.4G Wireless)

• Bluetooth: Ensure Bluetooth is enabled on your host device and the scanner is in pairing mode. Try unpairing and re-pairing the device.
• Беспроводная связь 2.4G: Ensure the USB dongle is securely plugged into the computer and the scanner is in 2.4G mode. Try re-plugging the dongle.
• Move closer to the host device to rule out range issues.
• Check the scanner's display for connection status indicators.

10.4 Scanned Data Not Appearing on Host Device

• Verify a successful connection between the scanner and the host device.
• Ensure the scanner is in "Instant Upload Mode" if you expect immediate data transmission. If in "Offline Storage Mode," you will need to manually upload the stored data.
• Check that the cursor is active in a text field or application on your host device where you expect the barcode data to appear.

For further assistance, refer to the manufacturer's official support resources or contact the seller.

11. Технические характеристики

12. Гарантия и поддержка

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the Symcode customer service directly. Keep your purchase receipt as proof of purchase.