Введение
Thank you for choosing the HOOBRO Full Size Floating Bed Frame. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Информация по безопасности
- Перед сборкой убедитесь, что все детали на месте и не повреждены. Не используйте, если какие-либо детали отсутствуют или сломаны.
- Собирайте каркас кровати на мягкой чистой поверхности, чтобы не поцарапать ее.
- Do not overtighten screws during initial assembly; tighten fully only after all components are in place.
- Во время сборки держите мелкие детали в недоступном для детей месте.
- Не вставайте на каркас кровати во время сборки или использования.
- Равномерно распределите вес по каркасу кровати.
- Регулярно проверяйте все соединения, чтобы убедиться в их надежности.
Продукт болееview
The HOOBRO Full Size Floating Bed Frame combines modern design with practical features, including integrated LED lighting and a convenient charging station. Its sturdy construction and padded edges are designed for comfort and durability.
Image: The HOOBRO Full Size Floating Bed Frame in a bedroom setting, showcasing its LED underglow and modern design.
Основные характеристики
- Floating Design with Padded Edges: Supported by internal legs for a floating visual effect, with high-resilience sponge padding to minimize bumps.
- Интегрированная зарядная станция: Features 2 AC outlets, 1 USB, and 1 Type-C port, mountable at any of the four corners.
- Светодиодная лента: Multi-color LED strip with music sync and timer functions, controllable via remote or app.
- Quiet and Stable Construction: 11 sturdy metal slats distribute weight evenly, with silent pads and non-slip foot plugs.
- Легкая сборка: Designed for straightforward assembly with detailed instructions and labeled parts.
Image: A visual comparison highlighting the safety and comfort of the floating bed frame's padded edges against the potential hazard of exposed metal edges on traditional frames.
Изображение: А view showing the 9.4-inch (24cm) under-bed clearance, suitable for storage boxes or robotic vacuum cleaners.
Содержимое упаковки
Please verify that all components listed below are included in your package before proceeding with assembly. Refer to the assembly diagram for visual identification of parts.
Видео: Оверview of all components included in the HOOBRO Floating Bed Frame package, laid out on a wooden floor, showing various metal tubes, screws, LED strip, and charging station.
Hardware and Components (Example, refer to actual manual for full list):
- Metal Frame Sections (e.g., side rails, crossbars, support legs)
- Деревянные рейки
- Screws, Bolts, and Washers (various types, labeled A, B, C, etc.)
- Универсальный гаечный ключ
- Charging Station Unit with Power Cord
- LED Light Strip with Remote Control and Controller
- Cable Ties or Clips for LED strip management
- Non-slip Foot Plugs
Инструкция по сборке
Follow these steps carefully to assemble your HOOBRO Full Size Floating Bed Frame. It is recommended to have two people for assembly.
Видеоруководство по сборке
Video: A detailed step-by-step installation guide for the HOOBRO Floating Bed Frame, demonstrating how to connect each metal component and install the slats.
Пошаговое руководство
Соберите основную раму: Connect the main frame sections (e.g., side rails and end rails) using the appropriate bolts and the Allen wrench. Ensure all connections are finger-tight at this stage.
Image: Illustration showing the connection of two side rail sections with screws, highlighting the alignment points.
Прикрепите опорные ножки: Secure the central support legs to the main frame. These legs are crucial for the bed's stability and the