Mexen Velar Duo Sliding Shower Enclosure

Введение

Thank you for choosing the Mexen Velar Duo Sliding Shower Enclosure. This manual provides essential information for the safe installation, operation, and maintenance of your new shower enclosure. Please read these instructions carefully before beginning installation and retain them for future reference.

Изображение: Спереди view of the Mexen Velar Duo Sliding Shower Enclosure. This image shows the overall design of the shower enclosure with its sliding door and gun gray brushed profiles.

Инструкции по технике безопасности

• Во время монтажа всегда используйте соответствующие средства индивидуальной защиты (СИЗ), включая защитные очки и перчатки.
• Ensure the installation area is clean, dry, and well-lit.
• Обращайтесь со стеклянными панелями с особой осторожностью. Закаленное стекло прочное, но может разбиться при ударе по краям.
• Verify that wall structures are capable of supporting the weight of the shower enclosure.
• Do not use abrasive cleaners or tools that could scratch the glass or profiles.
• Убедитесь, что все соединения герметичны, чтобы предотвратить протечки.
• Children should not be allowed to play with or around the shower enclosure during or after installation.

Содержимое упаковки

Перед началом установки убедитесь, что все компоненты имеются в наличии и не повреждены.

• Shower Enclosure Glass Panels (Tempered Glass)
• Sliding Door Mechanism Components
• Стена Проfiles (Gun Gray Brushed)
• Магнитные уплотнения
• Mounting Kit (screws, anchors, gaskets, etc.)
• Ручки

Настройка и установка

The Mexen Velar Duo shower enclosure requires assembly and screw-mounted installation. It is recommended that two people perform the installation due to the weight and size of the glass panels.

1. Подготовка: Unpack all components and inspect for damage. Ensure the shower tray or tiled floor is level and clean.
2. Стена Проfile Размещение: Позиционируйте стену profiles against the wall where the enclosure will be installed. Use a spirit level to ensure they are perfectly vertical. Mark the drilling points. The adaptive wall profiles are designed to compensate for minor wall unevenness.
3. Бурение и закрепление: Drill holes at the marked points and insert appropriate wall anchors. Secure the wall profiles to the wall using the provided screws.
4. Fixed Panel Installation: Аккуратно установите закрепленные стеклянные панели в стену.files. Ensure they are properly seated and secured according to the detailed instructions in the mounting kit.
5. Sliding Door Assembly: Assemble the sliding door mechanism, including rollers and guides, onto the moving glass panel.
6. Установка раздвижных дверей: Mount the sliding door onto the tracks. Test the sliding action to ensure it moves smoothly.
7. Handle and Seal Installation: Attach the handles to the sliding door. Install the magnetic seals along the edges of the door and fixed panels to ensure a watertight closure.
8. Окончательные корректировки: Make any necessary adjustments to ensure the door slides freely and seals correctly. Apply silicone sealant to the exterior joints between the profiles and the wall/shower tray as instructed to prevent water leakage.

Image: The Mexen Velar Duo Shower Enclosure installed in a modern bathroom setting, showcasinг его эстетическая интеграция.

Image: The Mexen Velar Duo Shower Enclosure with its sliding door partially open, demonstrating the access width.

Изображение: Крупный план view of the Mexen wall profile, showing the brushed gun gray finish and subtle branding.

Инструкция по эксплуатации

The Mexen Velar Duo features a smooth-gliding sliding door with a soft-close mechanism for enhanced user comfort.

• Открытие двери: Gently slide the door along its track using the handle.
• Закрытие двери: Push the door towards the closed position. The soft-close mechanism will engage, allowing the door to close smoothly and quietly without slamming.
• Уплотнение: The magnetic seals ensure a tight closure, preventing water from escaping the enclosure during use. Ensure the door is fully closed for optimal sealing.

Изображение: подробное view of the bottom track and magnetic seal, illustrating the water-tight design.

Обслуживание

Regular cleaning and proper care will ensure the longevity and pristine appearance of your Mexen shower enclosure.

• Очистка стекла: The glass panels feature a self-cleaning nano-coating that minimizes limescale buildup. For daily cleaning, wipe the glass with a soft cloth and warm water after each use. For deeper cleaning, use a mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive sponges.
• Профиfile Уборка: The gun gray brushed profiles are resistant to detergents. Clean them with a soft cloth and a mild, non-abrasive cleaning agent. Do not use abrasive cleaners, scouring pads, or solvents, as these can damage the finish.
• Техническое обслуживание уплотнений: Periodically check the magnetic seals for wear or damage. Clean them gently with warm soapy water. Replace worn seals to maintain water tightness.
• Техническое обслуживание катков и путей: Keep the sliding door rollers and tracks free from dirt and debris. Clean them regularly to ensure smooth operation. A small amount of silicone-based lubricant can be applied to the rollers if they become stiff.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact Mexen customer service directly. Keep your proof of purchase for warranty claims.