MOUNTUP Single Monitor Desk Mount (Model B0DNJ321JD) Instruction Manual

Введение

Thank you for choosing the MOUNTUP Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. This mount is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor.

Figure 1: Extended reach of the MOUNTUP Single Monitor Arm, offering up to 27.7 inches of extension and 17 inches of height from the desk surface.

Технические характеристики

The MOUNTUP Single Monitor Desk Mount is built with high-quality alloy steel to ensure durability and stability. Please review the following specifications to ensure compatibility with your monitor and desk setup.

Рисунок 2: Совместимость поview for monitor size, VESA patterns, and weight capacity.

Инструкции по установке

Carefully follow these steps to install your MOUNTUP Single Monitor Desk Mount.

1. Choose Your Mounting Method

Кронштейн для монитора поддерживает два способа установки: C-Clamp and Grommet Mount. Select the method suitable for your desk.

Figure 3: Two available installation methods: C-Clamp for desk thickness 0.39"-3.15" and Grommet Mount for desk thickness 0.39"-1.97" with hole diameter 0.39"-2.36".

C-Clamp Установка:

1. Прикрепите C-clamp base to the edge of your desk. Ensure the desk thickness is between 0.39" and 3.15".
2. Затяните крепление.amp screws securely until the base is stable.

Установка крепления с втулкой:

1. Insert the grommet base through an existing desk hole. Ensure desk thickness is between 0.39" and 1.97" and hole diameter is between 0.39" and 2.36".
2. Secure the base from underneath the desk using the provided hardware.

2. Assemble the Arm and Attach Monitor

1. Slide the main pole onto the installed base and secure it.
2. Attach the monitor arm to the main pole at your desired initial height.
3. Attach the VESA plate to the back of your monitor using the appropriate screws. This mount supports VESA patterns 75x75mm and 100x100mm.
4. Slide the monitor (with VESA plate attached) onto the arm's mounting head until it clicks into place.

Инструкция по эксплуатации

The MOUNTUP Single Monitor Desk Mount offers extensive adjustability for optimal viewУтешение.

Настройки монитора:

• Регулировка высоты: The arm allows for up to 28.5 inches of vertical adjustment. Gently push or pull the monitor to raise or lower it.
• Выдвижение/Втягивание: Extend the arm up to 27.7 inches or retract it closer to the pole to find your ideal viewрасстояние.
• Наклон: Tilt your monitor +90°/-90° to reduce glare and optimize your viewугол наклона.
• Поворотный: Swivel the monitor +90°/-90° to share your screen with others or adjust for different tasks.
• Вращение: Rotate your monitor +180°/-180° to switch between landscape and portrait orientations. Note that some force may be required for rotation, which is normal for secure positioning.

Figure 4: Full motion capabilities of the monitor arm for ergonomic positioning.

Figure 5: Visual representation of the monitor's adjustable angles.

Регулировка натяжения газовой пружины:

The gas spring mechanism allows for smooth and stable height adjustments. You may need to adjust the tension based on your monitor's weight.

1. Ensure the arm is in a horizontal position before adjustment.
2. Locate the tension adjustment screw on the arm (often marked with '+' and '-' symbols).
3. Use the provided Allen key to turn the screw:
• Повернуть clockwise ('-') к уменьшить напряжение for lighter monitors (monitor raises up easily).
• Повернуть counter-clockwise ('+') к увеличить напряжение for heavier monitors (monitor drops down easily).
4. Adjust gradually until the monitor stays at your desired height without drifting up or down.

Figure 6: Gas spring tension adjustment for optimal monitor stability.

Обслуживание

Regular maintenance ensures the longevity and optimal performance of your MOUNTUP monitor arm.

• Уборка: Протрите рычаг и основание мягкой тряпкой.amp ткань. Избегайте абразивных чистящих средств, которые могут повредить отделку.
• Проверка герметичности: Periodically check all screws and connections to ensure they are secure. Re-tighten if necessary.
• Газовая пружина: The gas spring is designed for long-term use, tested for over 20,000 lifts. If you notice a change in the arm's ability to hold position, refer to the "Gas Spring Tension Adjustment" section.

Figure 7: The durable gas spring arm is tested for over 20,000 lifts.

Управление кабелями:

Воспользуйтесь встроенной системой организации кабелей, чтобы поддерживать порядок на рабочем месте.

• Route monitor cables through the clips or channels along the arm to prevent clutter.
• Убедитесь, что кабели имеют достаточную длину, чтобы обеспечить полный диапазон движений без натяжения.

Figure 8: Integrated cable management and convenient tool storage help maintain a clean desk.

Поиск неисправностей

If you encounter any issues with your monitor arm, please refer to the following common solutions:

• Monitor does not stay at desired height or drifts: This indicates incorrect gas spring tension. Adjust the tension screw as described in the "Gas Spring Tension Adjustment" section under Operating Instructions. Increase tension for heavier monitors, decrease for lighter ones.
• Рука кажется скованной или её трудно двигать: The joints may be too tight. Loosen the relevant screws at the arm joints slightly. For monitor rotation, applying a bit of force is normal, and a cracking sound might occur, which is part of the design for secure positioning.
• Монитор колеблется: Убедитесь, что все крепежные винты (стола) исправны.amp/grommet and VESA plate) are securely tightened. Check that the monitor's weight is within the specified range (4.4-19.8 lbs).
• Отсутствующие детали или поврежденные компоненты: Do not attempt to assemble or use the product. Contact MOUNTUP customer support immediately for assistance.

Информация о гарантии

The MOUNTUP Single Monitor Desk Mount (Model B0DNJ321JD) comes with a Гарантия 3 год с даты покупки. Данная гарантия распространяется на производственные дефекты и дефекты материалов при условии нормального использования. Сохраните чек для предъявления гарантийных претензий.

Поддержка клиентов

For further assistance, technical support, or warranty inquiries, please contact MOUNTUP customer service through the retailer's platform or the official MOUNTUP website. Our support team is available to help you with any questions or concerns regarding your product.